Star Wars: The Rise of Boba Fett Ultimate Battle Pack (TRU Exclusive) by Hasbro, Part 3

Welcome to the third and final part of my look at the Rise of Boba Fett Ultimate Battle Pack and the entire reason I bought this set: Slave-1. Hasbro has been teasing us with a Super Slave-1 toy for a while now, and here it finally is. Now, I’ve already heard some rumbling complaints from fans who were expecting something a lot bigger. In truth, this Slave-1 is about 20-25 percent bigger than the past Slave-1 releases. It isn’t quite the facelift that the Falcon or the AT-AT got, but it is an extremely nice upgrade. Considering Slave-1 isn’t in the same size class as either of those two toys, I think Hasbro did a fine job in settling on how much bigger to make this ship. After all, proportionally speaking, this Slave-1 upgrade is pretty much right in line with the new Falcon. Yes, there are a few directions that Hasbro went with this ship that I take issue with, but size is not one of them.



The sculpt and paint job on the ship are absolutely fantastic and was obviously designed for life beyond the more simplistic style of The Clone Wars. In short, this ship is every bit as detailed as any regular Star Wars toy, at least that’s the case on the outside. The panel lines are nicely executed, there’s a ton of sculpted detail in the areas where the stablizer wings attach, and the bottom/back part of the ship is just brimming with details, which is a good thing, because this bottom portion of the ship is highly visible when Slave-1 is orientated in flight mode. The paint job is especially good, and while those of you looking for an ESB version will be disappointed, I’m happy to overlook the difference. The hull’s paint job is nicely weathered, making this ship look so much more like an Attack of the Clones Slave-1 and not one based off the Clone Wars series. The interior of the ship is a big step down, though. There are a few sloppily applied stickers on the inside cabin, but precious little else in the way of detail.


This Slave-1’s play features are basically a hybrid of the Vintage/POTF2 version (opening back compartment) and the Attack of the Clones version (opening cockpit) to give us the best of both worlds. Let’s start with the cockpit.

The opening cockpit is one of those play features where Hasbro is taking liberty with the ship’s design to help you get a little more fun out of it, since this panel was never seen to open on the actual ship design. It’s similar to what Hasbro incorporated into the cockpits of the Millenium Falcon toys to allow you to have access to that part of the ship. It wasn’t necessary with the Vintage/POTF2 toy, since you could put a figure into the cockpit seat (or bed?) and then flip it into position. But in the case of this ship (and the Attack of the Clones version) you need to open this hatch to put the figures into the cockpit. This huge portion of the ship swings up and locks into the open position with a very scary click that makes me think I’m hurting something.


This version of Slave-1’s cockpit allows for three figures, one pilot in front and two in the backseats. They are basically standing in the compartments with clips to hold them in place. If you are planning on putting Jango or adult Boba into these seats, you’ll need to use one with a removable jetpack. With the stabilizer’s unlocked, the cockpit will use gravity to orientate itself in the upright position like a gyroscope, so the pilot is always looking straight on in the direction that the ship is flying. The pilot and passenger area isn’t quite accurate to what we’ve seen, but I do like it very much. It’s impressive enough to be able to get three figures into it.

Opening this cockpit hatch also reveals a cargo slot at the base of the ship, which is obviously designed to store a carbonite slab of Han Solo. Unfortunately, the POTF2 slab won’t fit, but the more recent Saga version (yep, that annoying half-melted one) will slide right on in. It is, however, a snug fit, and if you push it in too far, you’re going to need a pen or something to coax it out again. Again, this isn’t at all accurate to what we’ve seen, but it’s still a nice little addition to the ship.

The side panel on Slave-1 lifts up to reveal a compartment inside. There isn’t a lot going on in here, but at least it adds extra room for cargo or passengers or whatever you want. There’s access to the cockpit, but you can’t really get figures in or out of the pilot seat this way. There’s also a peg on the wall, which I’m guessing is to store either Jango or adult Boba’s jetpack, but there’s no official word anywhere as to the function of this peg. I haven’t checked Jango’s backpack yet, but the VOTC version of Boba’s backpack clips on pretty well. There’s also a grid or vent that looks into another part of the ship, which we’ll see in a minute. As I said earlier, the amount of detail in this compartment isn’t stellar, but there are a lot of pegs to stand figures, and a fair amount of room.

Ah, but here we get to what I consider to be the most disappointing (possibly the only disappointing) thing about this vehicle. Despite the fact that the boarding ramp on the back slides down, there is no access into or out of the ship from this point. There’s a fake hatch sculpted on the inside of the compartment, and only part of a fake hatch sculpted on the outside. I think this was a huge mistep on this toy’s design, and in a way can be considered a step back from the Vintage/POTF2 version. Yeah, I can live with it since the ship has so much else going for it, but it really sticks in my craw. It’s like if Hasbro had the gangplank on the new Falcon not really lead into the ship.

Slave-1 features two rotating cannons on the tail boom, both of which fire missiles. It’s also got two bombs that store in sockets on the bottom of the ship and can be ejected by pressing buttons on either side of the ship’s base.


Slave-1 has one last play feature. There’s a hatch that opens above the fake boarding ramp and lowers down to reveal a compartment with a removable cell for holding captured quarry. This is the area that the grid in the main compartment looks into. I’ve heard more than a few fans complain about this gimmick as being silly, but I don’t see a lot wrong with it. At worst, I’d compare it to the little escape shuttle in the updated Millenium Falcon that can be ignored. In fairness, you can remove it entirely and use this compartment to store the carbonite slab instead of putting it in the front of the ship. Now whether or not including this gimmick prevented Slave-1 from having a working boarding hatch under it, is another matter. if that was the case, I highly disapprove.

All in all, I am very happy with this new Slave-1. It is by no means perfect and the fake boarding ramp will always bug me, but many of Hasbro’s greatest Star Wars toys have involved compromises, and this Slave-1 is no different. Still, it’s bigger, it takes play features from all previous versions and incorporates them together nicely, and it even adds a few surprises. Nonetheless, despite Hasbro’s coy and non commital answers at various Q&A sessions, I think we can all agree that there’s a 99 percent chance this ship will be released again with ESB accurate colors, probably with a Boba Fett figure and Han Solo Carbonite slab (painted without the melting effect) thrown in. I’d even wager it’ll happen next year, so if you just can’t justify the price tag for all this stuff, you can probably wait with confidence that you won’t be disappointed.

As for the price tag on this set… two ships five figures and a $109 price tag. Good deal? Well, it’s not a bad deal if you collect the Clone Wars toys. If you factor in that the figures would run around $7-8 each if you bought them all carded, then that’s about $37 right there. The Jedi Starship fits into Hasbro’s boxed vehicle assortment, which are selling for about $25 now, and that brings the total up to $62. If I set aside the fact that I wouldn’t have purchased the figures or the Starfighter on their own, that makes Slave-1’s cost nearly $40, and I don’t think that’s outrageously high. There’s a lot of fun to be had in this box for kids, and one really nice new version of a classic ship for us adult collectors.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.