Figma “Fate/Stay Night” Archer (Reissue) by Max Factory

What’s this? Two Anime Saturdays in a row? Well, I can’t promise this will go on, but after looking at the Figma version of Tohsaka Rin from Fate/Stay Night last week, I was mighty anxious to finally open up her Servant, Archer. I had this one on pre-order since it was first announced and it came in a couple of weeks ago. So let’s burn up one of our Command Seals and check this figure out!

I don’t have much new to say about the packaging. It’s typical Figma fare with a window on the front, some shots of the figure on the sides and back, and this compact little box is totally collector friendly. The figure number, in this case #223, is prominently indicated on the front. You’ll note I never pay much attention to the numbering on these figures and that’s because I try to be pretty selective about the ones I buy. Anyway, the box looks great when lined up on the shelf alongside the other Fate figures. As many of you probably know, I don’t tend to keep a lot of my figure packages, but I do keep all my Figma boxes so I have someplace to keep all that extra stuff. Although, as always, they include a branded Figma ziploc bag for the accessories.

Here he is free of all his protective plastic wrap and I’m happy to say he looks outstanding. I’ve had a thing for crimson trench coats ever since first seeing Trigun a couple decades ago and while Archer isn’t exactly wearing a trench coat, it has the same effect with the billowing skirt that fans out behind his legs. The crimson garment is continued up top with a sort of quarter-jacket over his shoulders and sleeves secured by what looks like a large silver clip on the back. There are also a pair of beautifully sculpted white ribbon ties, which are meant to help hold the two halves of the jacket together on the front. The underlying armor looks great, particularly the silver lining tracing around his chest and back. The belt and armor points on the backs of his sleeves are also painted with a nice silver, as are the armor pieces on his ankles and the toes of his boots. You get some cool straps around his legs, all painted pale blue.

The skirt is cast in two pieces of plastic, each one secured in the back with ball joints. This method allows them to articulate like they’re blowing in the wind or reacting to his movements. It also helps keep them out of the way of the leg articulation. Chances are if you have enough Figmas, you’ve seen this before. It always works really well, and I can’t emphasize that enough. Archer has one of those costumes that really wasn’t made to translate well off screen, but they did a beautiful job with it here.

Archer includes two different portraits, which is one less than I’m used to getting with my Figmas. You get one rather stoic or serious face and one shouty action face. I’m not going to gripe about the lack of a third portrait, as these two represent the sum of Archer’s emotional states. Unlike the usual Figma face-swaps, Archer’s hair is part of each face, so you don’t have to remove the front of the hair to change the face out. This makes it a little simpler, but still not too much different. Both faces are great. He’s got a slightly darker and yellow skin tone than usual, which is appropriate for the character. His eyes and eyebrows are perfectly printed and the open mouth looks particularly good.

And with swappable faces also come swappable hands. Archer includes a pair of fists and a pair of splayed finger hands. He actually comes with one more splayed finger hand, which is very slightly different and rather puzzling to me. He has a right hand with two fingers pointing. This hand can be used either as a gesture or to hold his arrow. And finally you get two accessory holding hands. So let’s talk accessories!

First off, Archer includes the twin swords, Kanshou and Bakuya and these are superb! They have sweeping cutlass-like blades and each one sports the Yin & Yang symbols on the hilt. Bakuya has a beautifully painted silver blade, but I especially love the honeycomb pattern on Kanshou’s dark blade. These fit snugly into the accessory holding hands and it’s nice to get some Figma swords that don’t feel ridiculously fragile… I’m looking at you SAO Figmas… ALL OF YOU! Yes, having a chunkier design makes all the difference.

Of course, Archer also comes with his bow, which is elegantly shaped, quite long, and all black. The accessory itself is great, but getting it into his hand was a frustrating affair. The grip doesn’t leave any space between his thumb and forefinger and the plastic used for the hand isn’t very pliable. Thankfully the thin guard plate can be un-pegged from the bow so as not to damage it and I was eventually able to get the weapon into his hand. Getting it out again was just as much the ordeal. It would have been helpful if the bow split into two halves, so you could put one in through the top of his grip and one through the bottom, and then peg them together.

Finally, Archer includes Caladbolg, the sword that he re-purposed as a ridiculously powerful arrow. This is an absolutely gorgeous piece of work from it’s ornate blue and gold hilt to it’s cork-screw silver blade. Max Factory knows how to produce some amazing looking weapons and this is another great example of that. The sword will fit comfortably into either of Archer’s gripping hands, but it’s really meant to accompany his bow.

Firing a giant and powerful sword out of a bow may look and sound great in an anime series, but recreating it practically here is a bit of a different story. The hand that is intended to knock the sword into the bow doesn’t hold it quite as well as I would have hoped, but I was able to make it work with a little effort.

Even a few issues interacting with some of the accessories, couldn’t make me love this figure any less. It seemed like it took forever for Archer to get his original release, and while I was watching it closely for a while, I must have moved on to other things because he eventually got released, sold out, and I didn’t know it until it was too late and he was selling for stupid money. I think that was like three years ago. I had this reissue pre-ordered as soon as I got wind of it and now that he’s in hand, I can stop beating myself up for letting the first release get away. I’ll confess that it’s getting harder for me to drop $65 on Figmas these days with so much else competing for my dollars, but I never seem to regret it once I get them in hand.

Advertisements

2 comments on “Figma “Fate/Stay Night” Archer (Reissue) by Max Factory

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.