Star Wars “The Mandalorian:” Slave-1 (#75312) by LEGO

Yeah, that’s right, the box may say Boba Fett’s Starship, but it’ll always be Slave-1 to me. Fight the power!!! Since I’ve been on a LEGO kick this year, I thought I’d take a break from the LEGO City Space stuff and switch over to The Mandalorian. These have been the only Star Wars sets I’ve been buying, not because the others don’t look good, but I have to try to set limitations where LEGO is concerned or I’ll be broke. I saw this set the last time I was at Target and the price seemed right, so let’s see what we got!

The set is a tad bigger than any I’ve built in a while, weighing in at 593 pieces, which come in four numbered bags. BUT… For some reason it only comes with one big instruction manual, whereas the last bunch I assembled had a booklet for each bag. Now, I’m not saying that has anything to do with anything, but I did find this build to be a little more challenging than any other recent LEGO experiences. So, I gotta call foul on that 9+ rating. I’m more than five times that age, and I had to backtrack a few times to see what went wrong. Needless to say, this was a pretty dense build with some neat stuff going on, and there were a few times where I honestly didn’t know why I was building something. I love that, because it creates a real gee-whiz moment when you place it on the model and see what’s going on. Anyway, in addition to Slave-1, the set builds two Minifigs, a Carbonite Prisoner, and a Transport Sled. As always, let’s start with the Minifigs!

The figs are Boba Fett and Mando, and these are pretty straightforward. Boba has his jetpack and Mando has a cape. Both have articulated range finders on their helmets, Boba comes with a blaster carbine, Mando has his spear, and there’s an extra blaster pistol if you want to give it to Mando. Only Boba comes with a jetpack, but Mando comes with a cape. Boba has a printed face, so you can display him with his helmet off if you want, whereas Mando just has a blank head under there, which feels kind of cheap. I know he rarely takes that bucket off his head, but he has in the show, so I think we should have had a printed face on there. But, it’s no biggie. I am particularly happy to have the Beskar Armor Mando, since the one I have that came with the AT-ST set is in his original armor. I also have to give props to the beautiful printing that makes up Boba Fett’s armor. It’s crisp and colorful and looks fantastic.

The Carbonite Prisoner is just a slab with a vent piece on the bottom and a sticker of a Gamorrean Guard. It’s OK, but the slab is really thin, which seems doubly out of place for a portly Gamorrean.

Here’s “Prisoners-With-Jobs-1” all assembled and looking pretty cool. So straightaway, if the size and cost of this set didn’t tip you off, don’t come into this one expecting a full scale model of Slave-1. It’s a substantial build, but as you can see, it’s scaled down a bit when compared to the Minifigs. The build is completely solid, which means the back doesn’t open up or anything beyond there being a sliding ramp with a slot to stow the Carbonite slab. And that’s fine, given it’s size. The fact that it is a solid build means the ship is pretty hefty and takes to being handled well. I ran into some difficulties assembling the side pieces, but I’m going to chalk that up to the way it was illustrated in the booklet and the few drinkys I had while building. As for aesthetics, I think it’s a good looking model, but I have two nitpicks. The canopy is a little flimsy the way it closes up and obviously doesn’t seal shut, and the guns on the tail boom are rather oversized. Neither are deal-breakers for me, especially given the size of the set.

There’s only room for one Minifig in the cockpit, and as you may have guessed, there’s no gyroscope articulation to the pilot seat. As a result, the Minifig is designed to sit in it as if it’s always in flight. There is, however, articulation in the wing stabilizers, and these will remain horizontal to the ground as the ship is maneuvered, just like the old Kenner toy, and that’s pretty cool. There are two cannon that fire red studs, and there’s a flip out handle hidden in the undercarriage to hold while you’re whooshing it around the room.

The Transport Sled is designed to move Slave-1 along the ground, but it can also be used to transport the Carbonite Prisoner, and it even doubles as a stand for displaying the ship at an angle, which is a really nice bonus.

Considering I recently paid a little extra for a pair of discontinued LEGO sets, this one actually felt like a decent deal at $40. Well, at least it felt like a decent deal by LEGO standards. Despite a few frustrations, I found the build to be very satisfying and while the ship is definitely scaled down, I think I’ll be content with it as my sole LEGO representation of Slave-1 in my collection. Especially since the bigger Slave-1 runs for hundreds of dollars. If you’re hankering to build something while you’re watching the next episode of Mando, and you want another cool little Star Wars ship for your LEGO shelves, you could do a lot worse than this one!


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.