I was hoping to get to some of my Mythic Legions backlog before the new wave arrived, but those figures hit my doorstep this past weekend. But I will manage to squeeze this one in before bumping the new ones to the head of the line. It’s hard to believe that it’s been two years since I last checked out a Mythic Legions figure here, but in my defense, last year I was pretty busy with Cosmic Legions. And even with three reviews a week, it’s easy for stuff to fall by the wayside. But, that’s why I’m trying to focus on a lot of unfinished business in 2024. Today’s figure comes from one of the most recent All-Stars wave, so let’s check her out!
The packaging hasn’t changed much at all since this line began. We still get the full plastic front with bubble that slides off the cardback. The cards are generic to the specific wave, but the bubble insert has some information on the character. Lady Avarona, the youngest of the Avarona Family, seems to be a pretty bad girl. Actually the whole lot of them are kind of dirt bags. They sided with evil during The Great War and got branded as traitors and now she fights for the evil Legion of Arethyr. Before getting started, I have to report that the figure’s left hand was rattling around in the package when I got her. Upon opening her I saw that the wrist peg looked like a dog had chewed it. I purchased her new, so I have to assume it was factory damage that nobody caught. I was able to remove the peg from the arm socket, reinforce it with some glue and reattach the hand. The wrist hinge is now useless, but at least I saved the hand and it can still swivel. Poor QC for me or bad karma for her being a traitorous bitch? You decide!
Here is Lady Avarona out of the package, wrist surgery completed and with her shoulder armor pieces attached. I am a big sucker for the knights in this line so Avarona is right up my ally and the suit of armor here is absolutely gorgeous in an evil sort of way. You get that rough-hewn iron look with jagged edges, spikes, and sculpted pitting, which suits this dark knight so well. It definitely looks like she shops at the same armory as the Orcs. There are also hints of sculpted chainmail between some of the plates. The coloring is gorgeous with a deep gray-black finish and a bit of silver drybrush to give the armor a well-worn look. The plastic tabard is a deep red with a metallic purple breast plate over it and you get plenty of silver paint hits to the tiny buckles and rivets throughout the suit. She has a waist belt and a shoulder strap, both of which have some really impressive leather-like texture. There are some sculpted pouches on the belt and even a scrollwork pattern sculpted into the shoulder strap, which is an insane little bit of added detail.
Avarona comes with only one head, which has a permanent great bascinet to protect her evil noggin. The bascinet appears to be sculpted separately from the head, as there’s some gaps between the helmet and the face which adds a lot of great depth to this portrait. It also has a hinged visor, which gives you two display options. The face shows a woman overcome with evil, depicted by her blood red, pupil-less eyes surrounded by some dark shading. She’s got a very dour expression, with downturned lips and a bit of sag to her jowls. It’s a really great portrait and kind of a shame to cover it up with the visor, although that look is also fantastic, with a jutting hound-style design, pierced breathing holes and a gap so you can still see her wicked looking eyes.
You get two weapons with the figure, a pole axe and a sword, and both of them can be carried on her person. There’s a loop on the back of her shoulder strap to secure the axe, but this requires the opposite shoulder armor piece to be removed to allow it to sit well. You do get a standard issue brown sword belt with a loop for the sword, but I find it interferes with the belt that’s already on the figure, so I opted to just tuck the sword through that belt and I’ll give the sword belt to someone else.
The sword has a sickle type blade and we’ve seen this piece before, most recently here with Thwickk, but that was four years ago. This version has been repainted with a darker grip to match Avarona’s chest armor and a bit of a darker gray for the blade steel. The top and bottom of the hilt is painted in a deep gold finish. I really love this particular sword design, especially its sweeping curve and vicious looking clipped point. I think it’s best used for the more exotic characters, but I think it fits Avarona pretty well.
She also comes with a circular shield, which is also a piece we’ve seen more than a few times. It’s painted in a dark gray to match the suit of armor with a dark red ring circling the central boss and some brass painted rivets circling the ring. The shield is held with the angled grip that pegs into the back that we’ve been seeing all along, ever since TFH replaced the original clip design. I was worried her wrist repair wouldn’t hold up to carrying the shield, but it seems to work fine.
This particular pole axe was first introduced back in the Advent of Decay assortment, so it’s been around for a while, but it’s been used sparingly enough that I don’t mind seeing it again. It’s a rather beautiful weapon with some organic curves to the axe head, an almost serpentine quality to the straight grip, and a subtle blade making up the bottom end of the shaft. It definitely has the elven flavor to it, but I think it works well with Avarona. Besides, anyone who has played an RPG knows that battlefields are a great place to pick up upgrades for your weapons, so maybe Lady Avarona picked this one up off a dead elf.
Lastly, you do have an optional softgoods piece to replace the lower half of the plastic tabard and I’m really mixed on this idea. On the one hand, it’s cool that TFH are experimenting with more softgoods beyond simple capes and fur, but in this case, I don’t like the disconnect between the plastic upper half of the tabard and the bottom being cloth. Don’t get me wrong, they matched the colors remarkably well, and added wire to the edges so you can pose it, but that transition going from plastic to cloth just doesn’t work for me. It’s just not a piece that I will display on the figure, which is why I snuck it in here at the end.
I’m not going to lie, having a figure broken in the package is not a great experience at any time, but it’s extra discouraging when it happens on the first Mythic Legions figure I’ve opened in nearly four years. I actually opened this figure about a month ago and when I saw the break, I just cast the figure aside in frustration and it took me a while to come back to it. Luckily the repair turned out pretty OK, and I was ultimately able to enjoy the experience. She’s a really great looking figure and it’s cool to add an evil female knight to my Mythoss mix. And despite the QC issue, I was able to come away pretty pleased with her. Hopefully that QC problem isn’t a sign of things to come with future figures. I’ll find out this weekend when I really start to dig into opening the Poxxus Wave!
NECA has been doing a number of Flash Gordon figures based on the King Comics license as well as his appearances from the old Filmation and later Defenders of the Earth cartoons. Those were some great figures, and I really need to get back to checking out some more of that Defenders line, but the big appeal for me has always been the 1980 Dino De Laurentis feature film. It was a financial and critical flop, but I first discovered it when it hit the VHS rental market. I was probably ten years old and it was love at first sight. I unironically adore this movie. It’s a sweeping, colorful epic that features some amazing sets and costumes and has an overall sense of pageantry that really feels like a comic book come to life. Even now, I like to pull out the Blu-Ray usually once a month and revel in its spectacle. Naturally, I was excited to see NECA finally getting around to the movie figures, and we now have the first three in hand. Indeed, I’m so excited, that I’m just going to tackle all three in one go. This is gonna be a long one…
These are part of NECA’s Ultimate line, not to be confused with Super7’s Ultimates (plural!) line. NECA was here first and they’ve used this moniker ever since they started stepping up their articulation and tossing in as many extras as they could. As usual, the figures come in window boxes with front flaps that secure with velcro giving you the feel of enclosed box with the luxury of a window to look at the goods inside. The deco is a mix of stills from the film and shots of the figure, and these are numbered, which gives me great hope that this line will be an ongoing thing and not just a one-off wave. Let’s start with Prince Vultan!
IT’S BRIAN BLESSED!!! Brian Blessed is a world treasure and an absolute legend in science fiction and British television. Whether it be as King Yrcanos in Doctor Who (long after turning down the role of The Doctor himself), Maya’s Dad in Space 1999, both Robin Hood the BBC series and the Robin Hood: Prince of Thieves movie, or how about King Richard in Blackadder! I could go on and on. But perhaps no role has been as iconic as Vultan, Prince of the Hawkmen in Flash Gordon. And oh boy just look at this gorgeous figure! For this release, NECA created a full-on mostly naked Brian Blessed buck and dressed it in leather and gold armor cast in soft plastic. The sculpted detail in the scale armor is superb, creating a kind of feathered motif, which is especially apparent in those shoulder pieces. The arm bracers and sandals are also meticulously detailed with the tiniest buckles on the sandals painted in gold. The love and attention to detail NECA poured into this costume is just fantastic and splendidly brings this epic character design to life in plastic form.
The wings are equally impressive with each and every feather fully detailed in the sculpt and finished off with a gold leaf paint and some wash to bring out those details. The wings are articulated at the shoulders allowing them to swing out for flight. If I’m going to nitpick anything on this figure I guess it would be the way they are attached to the body using a gold bar that looks mechanical rather than organic. Still, it’s only really noticeable when the wings are spread, and while attaching the wings to the figure with hinged pegs might have looked better, I appreciate that these stay put and don’t pop out when I’m posing them. As for the rest of the poseability, if you’ve handled NECA’s Ultimate figures before you’ll know what to expect here, with an emphasis on rotating hinges. It’s solid stuff that makes the figure fun to play with, but doesn’t offer those tight bends that some collectors hope for.
You get a whopping four heads, which can all share either the helmet or the hairpiece for an un-helmeted look. And each one of these portraits is just brimming with Blessed’s boisterous, big-bearded personality. The first is offering a huge smile and displaying a wall of teeth. The likeness is fantastic and my god the helmet is just so glorious. It attaches to the top of the four heads with a thick tab and it is extremely secure. The cheek plates are soft plastic and hug the face closely. The gold paint on the helmet is brighter and deeper than the slightly more bronze color used for the accents on the armor.
Next, we get this wonderfully expressive head showing off Vultan’s O-face. I’m pretty sure this one is supposed to be Vultan pronouncing the word Gordon in his infamous “Gordon’s alive” line delivery. If his eyes were looking up it could also work for the scene in Ming’s Court where he nonchalantly bonks one of Ming’s guards on the head with his club and hopes nobody noticed. I also love this head because it reminds me of King Yrcanos, the character he played in Doctor Who, who would sometimes accentuate his speech with whistles and sound effects.
Third up is most definitely Vultan delivering his “DIIIIIVE!” order for the Hawkmen to attack War Rocket Ajax. I really love how NECA mined the film for some very specific and iconic expressions for this figure.
The fourth and final head comes packaged with the hairpiece, but again, you can use the plastic coif on any of the heads by swapping out the helmet. Here, Vultan is in full on shouty-shout mode and I can just here his baritone laugh in my head. Wow, these are all great!
Clearly, a lot of the budget here was spent on heads, but you do get a few extra accessories and a pair of hands to hold them. The first accessory is featured in the tribute scene in Ming’s Court. It’s the fabled ice jewel of Frigia, which the Hawkmen claimed to have seized in battle from the royal crypt. But if you believe Prince Barin, it was stolen from his men. I think maybe there’s some truth to that.
Next you get this remote control device, which I think is the trigger for the explosives that were planted on War Rocket Ajax. It’s nicely done with some very sharp detail to the control pad. Still, probably not something I will display with the figure.
And finally, you get his club, which reminds me of an African War Club. It has a polished black finish, a hooked head for thumping enemies and a knuckle guard at the base of the hilt. This will probably never leave the figure’s hand when I display him. He just looks amazing raising it over his head and shouting like a war-crazed maniac.
Wow, I can’t say enough great things about this figure. It feels like NECA poured all kinds of extra love into this Vultan, and maybe that’s because the old bird has never had this kind of figure treatment before. And boy does he come damn close to being a perfect figure. With four heads and some solid accessories, it’s easy to see where all the money went. Let’s move on to Ming the Merciless!
In the annals of perfect film casting, I think Max von Sydow as Ming ranks pretty high. His performance endowed Ming with a delightful mix of charm and menace and he looked like the character from straight out of a comic panel. I tend to consider the robed look for the character more iconic, but NECA chose to go with his Military Suit version for this release. And that’s fine, because it makes me suspect that the other version is sure to follow. Ming sports a red tunic with flared, pointed shoulders and red trousers, tucked into high black boots. There’s gold piping around the edges of the tunic and a large gold decoration on the chest. The black gloves have red and gold rings at the wrists and a black, gold, and red baldric supports his sword and scabbard off his right shoulder. The colors on this figure look great, but I think the paint for the gold piping could have been sharper, still it’s not something that really impacts my enjoyment of the figure. Articulation is similar to what we saw with Vultan, with the torso articulation concealed under the tunic.
You get three heads for Ming, one with his black skullcap helmet, and two without. I think all three of these are homeruns in terms of likeness. The printing for the eyes and facial hair is really on point and I dig the sculpted lines in his brow and the crow’s feet around the edges of his eyes. The skull capped head’s expression is the friendliest of the three and reminds me of when Ming was trying to strike a deal with Flash. The second is the most neutral and the third has a wonderful little sneer to it. All three are great and it’ll be tough to choose which one to display on the figure.
Ming has less extra stuff than Vultan. The one less head does come with the trade off of two extra sets of hands. These include a set of fists, a set of accessory holding hands, and a set of gesturing hands. Although the right gesturing hand looks like it was intended for a gun. A really dig the sculpt and paint on the rather elaborate ring included on the left hands, especially since it featured prominently in a few scenes throughout the film.
The only other accessory here is his sword, which is pretty damn sweet. It fits perfectly into the scabbard and is easy to draw. It’s a very simple design with a straight blade and a short, straight crossguard. There’s a red painted jewel in the pommel and in the center of the guard, while the rest is all painted in gold.
Ming is an excellent figure, even if he does fall a bit short of the greatness that is Vultan. The only real complaint I have about the quality is the gold piping and that’s really just something to nitpick that could have been improved on. He does feel light in the accessories when compared to Vultan, and I wish they had at least included the chalice that he’s holding in the screen grab on the front of the box. I will probably dig into my Hasbro Indiana Jones figures and give him one of the False Grails included in that line. Hopefully, you’re still with me, because we have one more figure to go…
FLASH! AHH-AHHHHH… SAVIOR OF THE UNIVERSE! Like Ming, this is probably not my favorite look for the character, as I tend to prefer him in the white FLASH T-shirt. Again, I suspect NECA understood this and decided to hold that version back for a second wave. The strategy being that people will buy a figure that may not be their first choice look for the character in fear that it may be the only one released. But that’s not to say I don’t dig this Final Battle Flash, because I most certainly do, and it definitely gave NECA a little more to work with in terms of the costume design, not to mention accessories. Our hero dons a Mongo tank top, half black and half red with a sculpted symbol on the front. He’s got a wide belt with a gold belt buckle, black trousers and high buccaneer-style boots with a glossy finish. I dig that the emblem on the shirt is sculpted rather than just printed on and speaking of which, you even get sculpted chest hair. Wow! The forearms seem like they’re a little undersized, but I think that’s from being cut to allow for a tighter bend in the elbows. I think he turned out great!
With Flash, you get three different heads and each one features a really solid likeness to Sam Jones. The first is kind of neutral, the second is smiling a bit, and I’m not quite sure what they were going for in the third. It’s not bad, it’s just not really conveying any emotional expression that I can tell. I’d say that third one is my least favorite with the second one being my favorite, and I will likely stick with that one for display.
Flash features the same articulation as Ming and comes with five hands: One set of fists, one set of gripping hands, and one trigger finger right hand. I would have liked a relaxed or gesturing left hand to make it an even three pairs, but I guess that wasn’t in the budget. It’s worth noting here that I didn’t have any issues with any of these figures joints. Everything worked as it should right out of the packages, with absolutely no heat needed or QC issues to speak of.
As for weapons, you get both a Hawkman rifle and a saber, and both of these showcase some of the really cool and unique weapon designs from the film. The rifle has a distinctive organic sculpt to it’s grip and stock with a fanned feather motif at the back of the breech, gold around the receiver, and a gold ring near the muzzle. The rifle works perfectly with the trigger hand and he can support the barrel with his gripping left hand.
The golden saber is rather iconic, as promotional stills often have Flash wielding this blade. NECA even used the shot for the front of the box. This is a wild looking weapon with a dramatic sweeping hook to the curved edge. The rich gold paint looks awesome, especially when coupled with the bright red on the grip. You also get that weird starred disk about midway through the blade. I always wondered why the heck that was there. Seriously, as a kid I would think about that a lot and what purpose it served. It used to bug me! I really dig that the articulation allows Flash to wield the weapon with both hands and he looks great doing it.
And finally, Flash comes with a Mongo grenade. I love how everything in Mongo is so opulent and ostentatious that even the grenades look like Fabergé Eggs. This is a great little sculpt with a handle on top. It reminds me that we better get the green “football” included with the T-shirt Flash, assuming that figure is forthcoming.
Flash makes this trio three-for-three in my scorebook. This figure is crazy fun to pose and play around with, especially with his two cool weapons. I didn’t feel like there was the same variety in the portraits as there was with Vultan and Ming, but what we got are all still fantastic. I just won’t be as torn over which head to display on the figure as I am with the other two figures. As for accessories, I can’t think of anything else NECA could have given us with this one, or at least it doesn’t feel like anything has been omitted. OK, sure a Hawkman pistol would have been a great bonus.
Phew… that was a long one, but it was well worth it to get all three figures showcased in one go. Now, I will note that these figures are not cheap. At $37 a pop, that puts them above the ceiling that I’m used to paying for NECA’s Ultimate figures. I remember paying under $30 for the Defenders of the Earth figures, and then I remembered that time passes and prices inflate. As it happens, most of NECA’s Ultimate releases are up to the $37 price point these days. I guess it’s not outrageous considering what Super7 is getting for their releases, but it’s definitely a premium, especially for figures that can be found at Big Box retailers. Worth it? For me, that’s a big yes! The closest we’ve had to these guys were the ones from Big Bang Pow, which I reviewed here almost exactly 14 years ago, so I’m happy to be getting these upgrades. Of course, BBP never did a Vultan, nor did they do these versions of Flash and Ming, so really these are all a first for me. Unless you count the Big Chief Studio Sixth-Scale Flash Gordon, which I haven’t gotten around to reviewing yet, so that’s a story for another time. Whatever the case, I hope these sell well, because I want NECA to go deep with this line. I’m all in!
Mattel’s MOTU Masterverse is probably one of the best lines of figures I don’t collect. Well, I sort of don’t collect. I was limiting myself to the Princess of Power and Evil Horde figures, but they didn’t make a lot of those. I’ve also been collecting the figures based on the ’87 live action movie, and they seem to be even more limited. Still, I checked out the movie He-Man and Skeletor here a little while ago, and now I’m happy to add Evil-Lyn to the collection.
The package has changed a lot since those previous two figures. Instead of the bland Masterverse box we got this amazing character art and background mural based on the film. Additionally, the windows shows off the top half of the figure and there’s a compartment running up the left side of the box that houses the accessory and extra set of hands. It’s all collector friendly, and while I really want to keep this box, I probably won’t because it’s just a one-off anomaly. I went over my feelings about the movie when I reviewed He-Man, so I won’t go through it all again. I will say that when considering the highs and lows of the film, Meg Foster as Evil-Lyn was certainly one of the highs. Meg Foster was a strikingly beautiful woman and putting her into an Evil-Lyn costume certainly made teenage me want to hold aloft my magic sword. Her costume was great, her performance was great, and it’s awesome to finally have a figure of her in this role.
Here she is out of the box and there’s some stuff to love here and some stuff that’s not so great. As a figure based loosely off the series, I think it looks pretty good and it hits all the major beats of the movie costume design. The chest plate and grieves are cast in a cool pearlescent plastic, but it feels like they needed a lot more paint to make them work, as they just look kind of bland and unfinished. I like the printed scrollwork on the bodysuit, but the pink is really off putting. I think they based it on the lighting inside Grayskull, but the original costume was closer to flesh tone and the change bugs me. The half-skirt is cast in plastic, while the cape is actual cloth. I like the silver paint on the tops of the boots, and I wish we got some more of that. I don’t hate what we got here, but I wish some different choices were made.
Overall, I think the head sculpt is pretty good. It’s not a superb likeness, but it’s not a terrible one either. Let’s face it, no paint in the world can really capture the ethereal beauty of Meg Foster’s eyes. They are hauntingly gorgeous, and that’s something this figure was never going to be able to reproduce. She could have used more pronounced eye-shadow to match the makeup used on screen. I’d definitely rate the portrait better than the rest of the figure, so that’s something.
Where Evil-Lyn really falls down is in her poseability. The arms have rotating hinges in the shoulders, bicep swivels, and hinged pegs for the wrists, which is all fine. But the elbows are rotating hinges that can barely do 90-degree bends, so that’s disappointing. The legs have everything they need to be great, including double-hinged knees and thigh swivels, but the plastic skirt inhibits them severely, so it’s mostly all wasted. She has no articulation in the chest, just a tight joint in the waist that I can barely get a swivel out of. When it comes to playing and posing, there’s just no fun to be had here. And I think that’s reflected in how few pictures I wound up taking for this review.
Evil-Lyn comes with one accessory and that’s a translucent version of the Cosmic Key that came with Skeletor. I guess it’s supposed to be a hologram? Or maybe the key when it’s active and glowy. I don’t know, but it’s not a great accessory. She also comes with a pair of accessory holding hands, which if it’s supposed to be a hologram, why would she be holding it? Yeah, there’s just nothing exciting here.
In the end, I’m really torn over this figure. The costume deco doesn’t seem really screen accurate and she’s a frustrating figure to try to play around with because of the limitations to the articulation. On the other hand, she sure looks great standing alongside Skeletor, so I’m not sorry I bought her. I just really wanted to like her a lot more than I do.
FigureFan Zero 