Doctor Who: “Remembrance of the Daleks” Collector Set by Character Options

There were a couple of reasons why I passed on this set when it was first released. First off, buying a figure of a destroyed Dalek seemed like going overboard, even by my insane standards. Second, as much as I love Remembrance of the Daleks, it did contain my least favorite incarnation of Davros. Not to mention the big reveal at the end didn’t do anything for me. I called out that the Emperor was probably Davros under that thing as soon as he rolled onto the bridge of the Dalek ship, and I’m not usually that good at spotting things like that. Nonetheless, when CO finally delivered on Ace, this set seemed to be a lot better-rounded out and so I tossed it into the basket when I shipped.

dwremb1

dwremb2

The set comes in the same little compact style of window box that CO has used for the two-packs that won’t fit into a blister pack. The deco is based off a rather retro style that gives off a 70’s vibe. There’s a timeline on the bottom showing the different Doctors and the back panel of the box has a blurb about the episode. Sure, this box is one big spoiler for the episode, but it’s been like 25 years, and if you’re like me you probably would have guessed that was Davros anyway. The inner tray has an illustration, which could be saved as a display backdrop, but it’s not one of their better ones, so I didn’t bother. The box is collector friendly, but as much as I wish I had the room to save these, with space being limited, I have to be a lot more selective about packaging I keep.

dwremb5

Starting off with the destroyed Dalek, this piece is a lot better than it has any right to be. My first thought was that CO was just going to take a regular Imperial Dalek, cut it in half and melt it a bit. Nope, they actually did a lot of new sculpting for the Kaled mutant inside. The sculpt is heavily influenced by the Kaled mutants we’ve seen in NuWho and I’m fine with that since this is the last time we see The Daleks in the Classic series. The excellent sculpt and paintwork conspire to make for an appropriately disgusting mess. We never actually get to see inside the Dalek in the episode, so I really dig that they did this.

dwremb6

The claw that we do get to see is recreated here, complete with articulation, as it’s actually set on a ball joint! The area around the shoulder slats are painted brown to simulate the explosion, but from there down, it’s just a regular Imperial Dalek, complete with ball jointed sucker arm, weapon arm, and three rolling wheels under the base. This figure is by no means the cheap-out that it could have been, and I find I’m a lot happier to have it in my collection than I could have imagined.

dwremb7

And then there’s Dalek Emperor Davros. The design here is pretty lame and lazy. When closed up, he’s just an Imperial Dalek base with a huge sphere mounted on top. There are two ear lights and a hexagonal screen in the center. One of the things I hate about this design is that there are no Dalek arms. Ok, I get it that you’re The Emperor, but why wouldn’t you want a weapon and a sucker arm like all the other Daleks? Your Davros! People hate you! There are tons of people around the universe that want to take a pop at you! Why not have a gun arm? I know, the Emperor Daleks in the past haven’t had weapons, but it still bugs me. Granted, the figure here does a good job with what it had to work with.

dwremb8

dwremb9

Flip open the top and you reveal… Oh. My. God! That’s Davros in there! In the episode, you just saw Davros’ head emerging from a crazy nest of cables and wires. The figure features a good head sculpt and some detail paintwork for the wires. Again, it looks good for what they had to work with, but I’m just not at all crazy about this version of Davros.

dwremb3

dwremb4

The real reason I stayed away from this set in the past is that it retailed for $39.99. I’m the last to complain about the cost of Doctor Who figures, but that’s a lot of damn money for what you’re getting here. Nonetheless, now that I have an Ace with an RPG and an Anti-Dalek baseball bat, I thought it would justify having the destroyed Dalek in my collection. As for Davros, like it or not, it’s part of his history and it deserves a place on my shelf. I’m no fan of Eric Roberts as The Master, but if CO had put a figure out, I’d be obliged to get it. To be honest, with the line ending, I’ll likely be hunting down the few sets that I passed on, just so that I can have closure when there are no more figures forthcoming.

Doctor Who: Ace by Character Options

The Classic side of Character Options’ Doctor Who line has slowed down a bit, and now it’s all but confirmed that the line will likely end with this year. I’d be lying if I said I wasn’t hoping for something big for the 50th Anniversary and the news that the line was being shit-canned was not that something I was hoping for. Nonetheless, there have still been some important releases this year and a few more to come. Certainly one of the biggest holes in the collection for many fans has been Ace, spunky young companion to the 7th Doctor. To me, Ace’s relationship with The Doctor was very similar to Leela’s. Both ladies were prone to violence and despite The Doctor’s frequent cries of “No more Janus Thorn/Nitro-9,” Ace and Leela allowed The Doctor to remain conveniently detached from the violence that sometimes needed to be done. Well, we’ve already had several figures based on Leela, and now it’s time for Ace to get her due. And the cool thing is that this version of Ace is like several figures in one!

dwace1

dwace2

The packaging is fairly similar to the style used for Peri, Leela, and some of the other recent companions and two-packs. Ace was on the show in the 80’s, but the packaging still has a very Classic Who feel to it, and I’m talking more like the 70’s. Technically, Ace was billed as a 2013 San Diego Comic Con Exclusive, but as is often the case with these releases, there’s nothing on the package to signify that and she was readily available for purchase at various retailers after the Con. She comes in a sealed blister pack with a printed insert. The front shows off the figure wearing her jacket and with all her accessories and extra limbs arranged around her. The reverse side of the insert has a little backstory. Obviously, this package is not collector friendly and you’re going to need a trusty pair of scissors to get Ace out of there.

dwace3

dwace4

So, let’s start with Ace as she comes out of the package and wearing her signature leather jacket… the very reason this figure could not have been an easy one to make. Besides having her adopted name beautifully painted on the back, the figure recreates her habit of collecting patches, pins, and badges and affixing them to her jacket. CO did an incredible job reproducing them in all their tiny colorful glory. The jacket itself is actually a vest with the sleeves sculpted onto her arms. We’ve seen this done plenty of times by the likes of Hasbro and Mattel, but in this case it actually serves a purpose in making the jacket removable… but more on that in a little bit. The jacket remained constant through various other little tweaks and bobs to Ace’s ensemble so it’s awesome that they were able to get it this right. Besides the jacket, you get a soft plastic skirt, black matte painted leggings, and glossy black boots.

dwace5

The likeness is serviceable but not exceptional. Ace’s portrait is not one of CO’s slam dunks, as they have done some really great head sculpts over the years, but she’s definitely not bad either and the likeness definitely looks better in person. I’m not sure that Sophie Aldred was all that easy to sculpt, so I’m willing to give some leeway here. They definitely got her cheeks right and I like that her little pony tail is a separate sculpted piece. She is definitely a lot better than the Jo Grant and some of the Sarah Janes. Overall, I approve. Holy shit, I definitely used the word definitely way too many times in this paragraph!

To take off Ace’s jacket, you pull off her arms, remove the jacket vest and pop on her white sleeved arms. If you have the Jo Grant figure, than you’ve likely already done this sort of thing. It’s easy to do and it really does transform her into a mostly new figure. Again, the paintwork on her T-shirt is really phenomenal. It’s crisp and colorful. I really dig this option, but my guess is most collectors will want to display her with the jacket.

dwace11

dwace12

Ace’s articulation varies a bit depending on which arms you attach. With her jacketed arms on, she has ball joints in the shoulders, swivel cuts in the biceps and wrists, and hinges in the elbows. The t-shirt arms do away with the wrist swivels. The bicep swivels are there, but mine appear to be stuck and I’m not about to force it. The rest of the figure stays the same, with universal movement in the hips, swivels in the thighs, hinges in the knees, and a rotating head.

dwace8

dwace6

dwace7

dwace13

dwace15

Accessories! Ace comes with some cool gear! For starters, she has a backpack that can be worn and actually store some of her stuff. The back comes off so you can fill it with her three silver canisters of Nitro-9 explosives and there’s a slot on the top to slide in her baseball bat. The baseball bat is a nice addition since The Doctor energized it using The Hand of Omega and turned it into a Dalek busting bludgeon. You also get an RPG launcher with detachable grenade. That’s a lot of cool stuff, especially for a Doctor Who figure!

dwace9

dwace14

dwace10

Ace retails for around $20. It’s a fair amount of money to pay for a single 5” action figure, but it has been the going rate for the single figure exclusives in the past. Plus, Ace really is like two figures in one and comes with a lot of stuff, so I think the value is there. I may even get a second to display her with and without jacket. I was originally surprised that CO gave away so much with one figure, as they are the king of tweaks and repacks, but with the line ending, I’m guessing they wanted to get her all out in one shot.

Tomorrow, I’ll be back to check out a two-pack that I finally broke down and purchased to go with her.

Doctor Who: Cyber Controller and Guards by Character Options

There aren’t many Doctor Who figures in my collection that haven’t been featured here on FFZ, but somehow this beauty of a set was missed. I’m dusting my shelves today, so I decided to pull it down and have a looksee. It was way back in 2006 that the Cybermen made their first appearance on NuWho with a two-part story called “Rise of the Cybermen” and “Age of Steel.” As much as I love the Daleks, I think I was more excited to see the Cybermen return and I really dig this story, particularly the way they were reintroduced in a parallel Earth. It was precisely the sort of creative story-telling that has been absent from a lot of the Dalek and Cybermen stories of old, which often resorted to, “Oh, hey look, it’s time to bring this enemy back… write me a story for it.” Nope, these were the Cybermen… but they weren’t… it was just the kind of mind-bending shit that I love in my Doctor Who. Lumic was a really great villain too. He was an interesting mix of a sympathetic character and bat-shit crazy megalomaniac. Of course, he got his comeuppance when he was upgraded to the Cyber Controller, who happens to be the centerpiece of this set.

character-options-cyber-controller-with-cyber-throne-and-guards

I’ve had this thing for a long time and the packaging is long gone, but I cribbed a picture off of The Ebays for reference. I can still remember being so excited when I got this thing. Back then I was still in shock that we were getting proper Doctor Who figures, and when CO started releasing larger sets like this, my mind practically exploded. The set came in a window box with deco inspired by the credit sequence that would stay with the show all the way to the end of Tennant’s reign as the 10th Doctor. It’s a great presentation and part of me wishes that I had saved the box because it’s perfectly collector friendly. Inside you get The Cyber Controller and his throne plus two Cybermen Guards. Let’s start out with the Guards.

cocont1

cocont2

The Guards are just typical Cybermen, which is great for troop builders as they are identical to each other and any other standard Cybies released in the series. I liked the redesign of the NuWho Cybermen a lot and I’ll go one step further and say that I think these figures look even better than the onscreen counterparts because they don’t have the fabric bodysuit showing between the joints. Instead it’s sculpted to look more like wires or just flexible metal. These guys also have the wrist gun sculpted onto their right forearms and the Cybus emblem on their chests. The silvery finish gives them a nice metallic look without being too shiny. I probably have four or five of these guys total and I always regret not picking up some more.

cocont3

cocont4

The articulation on this pair is pretty good, especially considering the Cybermen of the period were not terribly agile. You get a rotating head, which appears to have a tiny bit of up and down movement. The arms rotate at the shoulders, have hinged elbows, and swivels in the wrists. The legs are balljointed at the hips, have hinged knees, and ball joints in the ankles. I do wish you could swivel their arms to make their firing position a little more convincing. For some reason I want the gun arm on the top, but hey it still works.

cocont7

cocont5

The Cyber Controller was unique to this set and I’m pretty sure he hasn’t been re-released since. I originally presumed he would be sculpted into the throne, but nope, he’s a bona fide figure. He’s basically a slight resculpt of the regular Cybermen we just looked with a brand new head. The only difference about his body is the lack of a gun on his arm and the six connection ports on his upper chest and shoulders. These are used to wire him into the throne. The head features a transparent dome with his brain exposed and the eyes are painted blue instead of black.

cocont9

cocont10

DSCN2133

cocont11

The throne is one big piece of plastic with a ton of wires and cables sculpted into it and it has a little bit of an HR Giger feel to me. The chair itself has a rough texture and there’s a Cybus emblem near the base. The Controller doesn’t so much sit in it as lean back into it and bend his legs, but he will stay put pretty well and he looks great. Every now and again he’ll slip down so a tiny blob of blue tack on his butt helps him stay planted. The wires flexible wires all plug into his access ports to help integrate him into the chair.

cocont6

cocont8

If you love your Cybermen as much as I do, you really need this set in your Who collection. I think it’s one of the coolest Deluxe sets Character Options pumped out during the time. I seem to recall paying about fifty bucks for it, which even now doesn’t seem too bad considering the Cybermen were often selling for around $20 each when they were available. Right now this set is just chilling on my NuWho shelf, but one of these days, when I get more display space, it’s going to be the centerpiece of my evolution of the Cybermen display.

Doctor Who: Cybermen (3 ¾” Scale) by Character Options

Alrighty, time to wrap up the look at the new 3 ¾” Doctor Who figures with the Cybermen! The Series 7 episode, “Nightmare in Silver” gave these guys their first real upgrade since their return to the show in 2006. It’s a much sleeker and more agile look than the Cybermen have had in a while. In fact, they now look like Tony Stark may have had a hand in their redesign. Let’s see how they turned out in the new 3 ¾” format.

dw375cyb9

There’s the packaging and it’s the same as we saw yesterday with the Ice Warriors. There’s a personalized insert in the bubble and the Cybermen come with the generic “DWARTIS” figure stand. Once again, I am unable to resist troop building these guys.

dw375cyb6

The sculpting on these guys is definitely well done, albeit it does strike me as a bit soft in some areas, particularly the head. Although, it may be because the new heads are more rounded and I’m still not used to seeing that. I’m not a big fan of the disc in the center of the chest. The discs were only ever on the last design and when it’s carried over to this new body, it really does look way too derivative of some of the Arc Reactor in the Iron Man armors. Of course, that’s a gripe with the creature design and not the figure. The figure is excellent, with all the various plates and panel lines of the new design wonderfully recreated. I love the sculpted spine in the back and the figure even achieves a look of convincing layering between the armor plates and the softer joint segments.

dw375cyb1

dw375cyb2

Obviously, there isn’t a lot of dynamic coloring on this figure. The cybermen are black and silver and that’s it. The figure is cast in grey plastic and painted entirely in a metallic silver, which overall looks pretty nice, although some figures have inconsistencies in the paint. The deco makes them look a bit weathered, which I’m pretty happy with, but if you’re looking for your Cybie to be super shiny and fresh, it may disappoint a bit. Coincidently, this is the kind of paint I would have liked to see on the Ultron figure that I looked at on Monday. So in that instance, Character Options 1, Hasbro nil.

dw375cyb3

dw375cyb5

dw375cyb4

The Cybermen have the same basic style of articulation as the Ice Warriors. The head is ball jointed. It can turn fine, but the rest of the head movement is a little shallow. The arms feature ball joints in the shoulders and hinges in the knees. Again, the lateral shoulder movement is a little restrictive because of the shoulder plates. The legs feature ball joints in the hips and hinged knees. You can get some Ok poses out of these guys, but I would have really liked a swivel in the waist or a ball joint in the torso. Still, considering how crappy the articulation has become with other lines in this scale, I’m not going to harp on it too badly. This is actually better articulation than most of Hasbro or Mattel’s current film-related efforts in 3 3/4 inches.

dw375cyb11

dw375cyb10

And there you go, we get the new Cybies exclusively in the 3 ¾” format. I absolutely love these figures, but only getting these in the new scale format… I gotta be honest, folks, it really stings! I’ve got every incarnation of the Cybermen in my five-inch collection (well, except for the “Revenge” versions, which have yet to come Stateside), so not being able to add the latest versions to that display really sucks. This is the first time the scale change has really pissed me off, but I’m sure it will not be the last. But hey, at least the figure is really good.

dw375cyb7

dw375cyb8

And that wraps up this initial wave of Doctor Who figures. Fan response to this new line has not been very favorable, although my dealer has now sold out on all but The Doctor on two or three occasions. It’ll be interesting to see what the future holds for the line, and whether we’ll be getting a new wave from the 50th Anniversary special and the Christmas special. I suppose it’s possible we could get a 10th Doctor in the scale, since Tennant is reprising his for the 50th. The Zygons are also appearing and I could easily see myself buying three or four of those. I will say that the biggest opportunity for going small scale was more playsets and vehicles, and I’m not real keen on those cardboard environments. If we don’t at the very least get a TARDIS console room, I’m going to be pissed.

Doctor Who: Ice Warriors (3 ¾” Scale) by Character Options

In the interest of trying to be topical, I’ve decided to just push through with a Doctor Who 3 ¾” scale figure trifecta. Yesterday we checked out the Daleks, today we’ll look at the Ice Warriors and we’ll wrap it up with the Cybermen tomorrow. The move to the new scale has been rocky so far with some good and some bad. Let’s see which side of the fence the Warriors from Mars fall on…

dw375ice9

There’s the packaging and it is virtually identical to what we’ve already seen with The Doctor and Clara. You also get the same generic “DWARTIS” style figure stand, which was understandably missing from the Daleks. This figure is based on the new Ice Warrior design introduced in the episode “Cold War” although only one Ice Warrior was shown in the episode, so I’m surprised that CO didn’t release the figure as Grand Marshall Skaldak. I’m guessing they went the generic route to encourage kids and collectors to troop build these, but what sad fool would bother doing that?

dw375ice6

Yeah… Getting multiple Daleks was a given, but even surprised even myself when I picked up more than one Ice Warrior. The problem with this new line is that they don’t take up a lot of room and they are relatively cheap, so my restraint has been failing me. Besides, I do love the Ice Warriors. Like the Daleks, the NuWho design of the Ice Warriors is pretty faithful to the classic one. I always assumed the armor was their natural shell, but “Cold War” dispelled a lot of things we thought we knew about these Martians. Anyway, let’s get him out and see what we’ve got…

dw375ice1

dw375ice2

The figure is pretty good. It features a lot of detail in the sculpt, showing all the little segmentation and craggy lines in the armor. The likeness of the head is particularly nice for the smaller scale. I can’t help but wonder that if he was in the old five-inch scale, whether we might have been given a swappable head, sans helmet, but I guess we’ll never know. The torso is a bit bulkier and more barrel-chested then I think it should be, but I haven’t re-watched the episode since I got the figure, so I could just be remembering wrong. Another quibble is the lack of a gun in his wrist. I know it was sort of built into his sleeve in the episode, but a little sculpted knob or painted bit would have helped. I may wind up robbing some big-ass gun from my POTF2 figures for these guys. Either way, I’m still totally happy with the way the sculpt came out. As for the coloring, the only paint apps on the figure are the red for the eye shields, and that’s really all it needed. Otherwise, the figure is cast in a very cool, slightly metallic green.

dw375ice3

dw375ice4

dw375ice5

Articulation on this new line has been all over the place, so let’s see what we’ve got here. His arms are ball jointed at the shoulders and hinged at the elbows. There are sadly no swivels in the biceps or wrists, but since he isn’t really sculpted with a gun, I guess that’s not such a big deal. The legs are also ball jointed at the hips and have swivels in the waist. There is no articulation in the torso at all, but he can turn his head. All in all, I’m fairly pleased with the articulation here. Even Skaldak was a lumbering dude when he was in his armor, so I didn’t need thee guys to be super-poseable.

dw375ice7

dw375ice8

The Ice Warriors are definitely a solid effort and one that was desperately needed for this inaugural wave of the new line. They don’t quite equal the pure win of the new scale Daleks, but they’re definitely executed much better than The Doctor or Clara. I’m also not terribly heartbroken that the NuWho Ice Warriors are exclusive to the smaller scale. Sure, given my druthers, I would have liked at least one of these in my five-inch collection, but the design is close enough to the Classic versions and I have four of those standing on my shelf, so I’m good.

I opted not to buy any of the new scale Weeping Angels, so tomorrow we’re going to wrap up this wave with a look at the Cybermen!

Doctor Who: Daleks (3 ¾” Scale) by Character Options

Like it or not, the NuWho scale change is upon us. A couple of weeks back  I checked out The Doctor and Clara, last week it was the TARDIS, and today we’re looking at Daleks. While we Who collectors can wring our hands and gnash our teeth over the fact that we will never get a five-inch scale Clara, or Series 7 Ice Warriors or Cybermen, the Daleks released in CO’s new 3 ¾” line are undeniably a welcome treat. These guys have already been released in the old scale and I have plenty on my shelf to go with my five-inch collection, so there’s no heartbreaking exclusivity issue. Not to mention, I’ve wanted proper 3 ¾” scale Daleks for my other non-Who figures to fight for as long as I can remember. This is win-win, folks, so long as they turned out better than the last two figures we looked at. Here’s a spoiler… they did!

dw375dalek1

This is the same packaging as we saw last week. The only real difference is that there is no figure stand included.

dw375dalek5

That’s right, Mr. Dalek! As much as I like the New Paradigm Daleks as toys (not so much on the screen), I’m glad CO went with the regular NuWho Dalek for this scale, or RTD Dalek if you prefer. This is the now familiar coppery colored Dalek first introduced in the Series 1, Ninth Doctor story, “Dalek.” I’m also happy to report that these little guys are like shrunken down versions of their larger scale predecessors with fantastic sculpts and nice clean paintwork. Seriously, if you own the larger scale versions, you should know exactly what to expect from these little little beauties.

dw375dalek7

dw375dalek8

dw375dalek9

dw375dalek12

Interestingly enough there appear to be some variant Daleks in the line. Some variations are as subtle as the different length eye stalks. So far, I’ve picked up four of these little guys and only one of those has the smaller eye stalk, so it’s clearly a chase figure. But apparently some black Daleks have also turned up in circulation in the UK and are fetching high prices on the secondary market.

dw375dalek13

Articulation is identical to CO’s five-incher Daleks. The head turns, the eye stalk can raise and lower, and the arms are on ball joints. If you turn him over, he even has the same locomotion as the other Dalek figures, with two wheels in the back and a rotating wheel up front.

dw375dalek10

dw375dalek11

If you can’t tell, I’m thrilled with these little Daleks. They take everything that is great about the larger versions and reduce them to the 3 3/4″ scale. Honestly, even if CO hadn’t rebranded NuWho into this scale and just produced these Daleks, I still would have bought a ton of them for the sheer crossover potential alone.

dw375dalek3

The only downside. Even with four in my collection now, I have another on the way to me. Will I stop there? Who knows!

 

Doctor Who: “Spin and Fly” TARDIS (3 ¾” Scale) by Character Options

So far CO’s new 3 ¾” action figures aren’t exactly lighting my fire. In fact the first two we looked at, The Doctor and Clara, were barely passable and that’s even with me grading on a really generous curve on the count of I love all things Doctor Who. Well, today we’re cranking things up a notch with a look at the new 3 ¾” scale TARDIS. I am fortified with Jameson and ready to go…

dw334tardis1

The TARDIS comes in a window box that reminds me a lot of the packaging for the last five-inch scale TARDIS I purchased. I believe that was the “Christmas Adventure Set.” In any event, the point is that the package still retains a lot of the same look as the older figures, right down to the now (thankfully) obsolete “DWARTIS” logo. Ok, BBC, enough with that shit already. Get rid of it! The window gives you a pretty good look at the TARDIS inside and the back and side panels point out some of the various features. There’s no “Try Me” feature, as the TARDIS does not come equipped with the three AAA batteries that you’ll need for the FX. The box is collector friendly and unlike the last TARDIS I bought, this one is pretty easy to get out.

dw334tardis4

While I think I shall always prefer the super weathered and decrepit look of the 70’s TARDIS, I’ve become pretty fond of the one currently used in the series, particularly the return of the “St. John’s Ambulance” crest. CO’s new version is more or less just a scaled down version of the last 11th Doctor TARDIS, albeit there is a brand new illustration inside depicting the current console room interior. Seeing as how the Classic TARDIS toys haven’t had any inserts, I wasn’t expecting this, and it is a very welcome inclusion. The front doors are still independently spring-loaded and they will each lock in an open position. The door for the phone cubby doesn’t open, but that’s fine with me. The “Police Box” and “Pull to Open” signs are all stickers, which seem pretty strongly affixed. The coloring is nice and the wood texture is all sculpted in, making this a great looking toy with little detail sacrificed for the drop to the smaller scale.

dw334tardis5

On the down side, CO chose to put the battery compartment on the back of the TARDIS instead of on the bottom, or perhaps inside. That means that while the toy looks great when viewed from three of the four sides, the back looks ugly, with a big seam running through the doors and an exposed screw head. In fairness, this was a problem on the some of the other TARDIS toys they’ve released. It’s not a critical flaw to me, as my TARDIS inevitably wind up standing in display cases with the back to the wall and out of sight.

dw334tardis3

What’s that? You say you want gimmickry? Well, they don’t call this the “spin and fly” TARDIS for nothing. It comes with a clear plastic base that you can plug into the bottom so you can spin it! It does not, however, fly, and CO made the effort to point that out on the package! The spinning gimmick does nothing for me, but this is a line designed for kids, so it gives me no small delight to know that kids somewhere will be running through their houses spinning their little toy TARDIS with glee!

dw334tardis7

The lights and sound are confined to the flashing lamp on the top and the demat and remat sounds. As with past TARDIS toys, the sounds are activated when you pick up the TARDIS or put it down. The SFX on this one are on par with the very first Flight Control TARDIS, which is a very good thing. Some of the recent SFX TARDIS releases have had a truncated sequence, but here it’s nice and long and I love it. The lamp flashes during the demat and remat sequences and then stays lit for a short while after and eventually goes into sleep mode.

dw334tardis6

This new 3 ¾” scale TARDIS costs around $20 to $25 depending on your importer. I always recommend the amazing folks at Who North America for all you Doctor Who merchandising needs, but they are currently sold out. As for the value, I’m probably the wrong person to ask, because I’m willing to pay almost anything for Doctor Who toys and merchandise, so when you offer me a TARDIS that’s scaled with so many of my other collections, I’m happy to plunk down the Andy Jackson and not think twice. In the end, this is an excellent toy, possibly proving that there’s hope for the 3 ¾” line yet.

Ok… now let the crossovers begin!

dw334tardis8

dw334tardis2

 

Doctor Who: Clara “Oswin” Oswald (3 3/4″ Scale) by Character Options

Yesterday, I looked at the new 3 ¾” Doctor figure from Character Options, and I was less than delighted with the final outcome. I promise you that this initial wave of figures will improve as we get into the baddies next week, but not today. Today we’re looking at The Doctor’s sexy little companion, Clara. Hang on, I’m going to need to pour a glass of Jameson for this one.

dw334oswin6

There’s the packaging. It’s the same as what we say yesterday, so let’s not dwell on it.

dw334oswin2

CO had a few different outfits to choose from for the Clara figure, but they decided to layer her with two coats over her dress. The result is that she looks bulky, and that kind of dampens the appeal of this particular character. Knowatamean? Not that I think they could have accurately reproduced Ms. Coleman’s curves in this scale. Oh no. You would need plastic craftsmen far more talented than CO’s stable to make that happen. Anyway, the body sculpt is passable and there’s some decent paintwork for the pattern on her dress. The legs on mine came a tad warped out of the package, but she will stand on her own. She’s also nicely scaled against The Doctor as she comes up to just past her shoulder.

dw334oswin3

And then there’s the portrait. Wow. It’s weird, because I can kind of tell it’s supposed to be Jenna Louise Coleman, but it looks like she’s puffing out her cheeks and pulling a mad face. They got the hair right, and she does have a pretty round face, which is reflected here, but it’s a little too round and puffy and the paint on her eyes make them look like they’re bugging out of her head. There’s also a huge blue blotch of paint on the back of her head.

dw334oswin1

Articulation on Clara is different from The Doctor and I find that to also be weird. It’s supposed to be a cohesive line of figures, CO, so pick an articulation style and go with it. Anyway, instead of ball joints in the shoulders, Clara has simple rotating joints. To make up for it, she has swivel cuts in the biceps and forearms, and she has hinged elbows. She has hinged knees, and her head rotates. Presumably, she has a T-crotch, but her dress renders any articulation above the knees useless. You won’t get a lot of action poses out of Clara, but I suppose she’s articulated enough to make soufflés.

dw334oswin4

Clara comes with two accessories. You get the same figure stand that came with The Doctor, and you get a red handbag. The handbag seems pretty pointless. I don’t even recall her carrying it much in the show. Something more useful would have been cool, like maybe the laptop from “The Bells of St. John.”

dw334oswin5

All told, Clara falls in about the same level of mediocrity as The Doctor. The sculpt is barely passable and the articulation isn’t great. But Clara feels like a bigger disappointment simply because this figure is the reason we won’t be getting her in the five-inch scale. I’ve already got three different 11th Doctors in my 5-inch scale collection, so that wasn’t such a big deal. But with Clara, here’s where it begins to sink in. This is what we got instead of what would have surely been a better figure in the old scale, and there’s just no reason for it. Maybe if CO releases a console room, and not a cardboard one, it will be worth it down the line, but we’ve seen no indication that that’s going to happen. Next week, things in the 3 ¾” Doctor Who line will improve as I go through the rest of the wave.

Doctor Who: The 11th Doctor (3 ¾” Scale) by Character Options

 “Change, my dear, and it seems not a moment too soon.”

– The Sixth Doctor, The Caves of Androzani.

Yes, we are indeed getting change from Character Options, but I’m not so sure about whether it was a moment too soon. It’s no secret I loved CO’s five-inch scale Doctor Who figures, although I’ll concede that I bought a lot more of the Classic line than the NuWho figures. The reason, of course, wasn’t the scale, but rather the figures based on the current series were often victims of poor character selections and the releases were few and far between. I can tick off a dozen figures from either Series 6 or 7 that I would have bought in an instant, but we never got them. Whatever the reason, CO has decided to take the line to a more “standard” 3 ¾” scale, and I’ll concede that introduces some intriguing possibilities of The Doctor and company intermingling within my other collections. Of course, it also alienates all future releases from our existing Who collections, so whether it was worth the change remains to be seen. Today we’re checking out The Doctor!

dw334msd9

The packaging, for all intents and purposes, is just a shrunken down version of the card and bubble that we got with the last waves of 5-inchers. The card is generic with a TARDIS illustration on the front and a circular bubble showing off the figure and the accompanying stand. The bubble insert has the figure’s name and the “DWARTIS” logo. Seeing as how that hasn’t been part of Series 7b, I wish they would have dropped it from the package design. The packaging isn’t a big deal to me, as I rip them open and toss them, but that having been said, the presentation here is just stale. Considering this is a brand new line and a brand new scale, I think CO would have been smart to rebrand them into something different and more exciting.

dw334msd8

The back of the cards show the other figures in the line, as well as some of the cardboard playset-diorama things that are also available over in the UK right now.

dw334msd2

When the scale change was announced, there was a lot of complaining among collectors about how that scale couldn’t possibly hold the same quality of sculpt as the old line. Soon, CO showed off a prototype of The Doctor and it assuaged a lot of people’s fears. Unfortunately, the final product is nowhere near what we saw in that original teaser figure. It’s overall pretty meh. The head sculpt is barely passable and the closer you get to it the worse it becomes. Some companies, particularly Hasbro, have had some amazing head sculpts in the 3 ¾” scale lately, and in that context this figure doesn’t fly. I doubt most could identify it as Matt Smith, but if I told someone who it was supposed to be, some might say, “oh yeah, I can kind of see the resemblance now.” There have been horror stories looming about the paint on the face. Googly eyes, mad eyes, and boss eyes have been in abundance. I’m happy to say the paint on my figure isn’t overly terrible, although there is some stray paint near his chin. Overall, the head sculpt here seems primitive.

dw334msd3

As for the rest of the figure: You get The Doctor in his longer coat with vest, shirt, and bow tie. Bow ties are cool. The coat is sculpted in soft, rubbery plastic and hangs down below his waste and is securely glued to the torso. There’s very little sculpted detail to the coat, making it look smooth and rather unconvincing as an actual garment. The shirt and vest fare a little better. Ironically, I think the trousers and shoes look the best. The figure’s proportions are ok. Maybe his arms are a little long. His right hand is sculpted to hold his Sonic Screwdriver, which is provided.

dw334msd4

dw334msd6

Articulation on The Good Doctor is subpar when compared to the competition. His head can turn, his arms feature ball joints in the shoulders, hinges in the elbows, and swivels in the wrists. His legs have a standard T-crotch and he has hinges in the knees. He appears to have swivel cuts at the ankles, but mine don’t seem to want to turn and I’m not going to force them and risk twisting off his feet. You can get some poses out of him, but he’s still a rather stiff figure. Swivels in the biceps and ball joints in the hips would have helped a lot.

dw334msd7

dw334msd5

Besides the Sonic Screwdriver, The Doctor comes with a figure stand molded to look like the “DWARTIS” logo. Again, the DW thing isn’t being used anymore, so it feels kind of inappropriate here. On the other hand, the shape and style makes for a decent stand.It is, however, fairly large considering the size of the figure, and the peg is oddly placed, so if you have the logo facing you with the figure pegged on it, there’s a lot of wasted, empty space in front of the figure.

dw334msd1

dw334msd10

dw334msd11

And there we go. Character Options’ new 3 ¾’ line is off to a dubious start. Frankly, based on initial reactions around the InterToobs, I was expecting worse, and indeed comparing The Doctor to some of Hasbro’s best efforts make him look laughable by comparison.  I can certainly tell this is a first foray into the scale on CO’s part because it clearly shows. On the plus side, The Doctor does scale quite well with other leading lines, so you can finally do those Doctor Who-GI JOE-Star Wars-Marvel Universe crossovers that you’ve always wanted to do. At $10 each, these he isn’t priced too badly for an import figure and I’ll be looking at the rest of the wave in the near future. I’m not at all sorry I bought him, and as we’ll see other figures in the wave fared much better.  I’ll be back tomorrow to look at Clara.

Doctor Who: The 11th Doctor Sixth-Scale Figure by Big Chief Studios, Part 2

Aaaaand I’m back to conclude my look at Big Chief’s 1:6 scale 11th Doctor figure. The guys at Big Chief packed The Good Doctor with a lot of accessories based off of items that we’ve seen featured in various episodes. Some are great, some are kind of cool, and some I could have done without. But first…

DSCN1147

I’m going to start out with the figure stand, only because the stand is easily the most disappointing thing about this figure, and I don’t want to end the feature on a low note. Rather than just a simple stand, Big Chief delivers a bit of an environment. They were going for a stand that looks like a section of the clear platform that surrounded the TARDIS console in Series 5, 6, and 7A. The look is certainly there, but the stand has enough issues to make me wish they hadn’t tried it. For starters, it feels rather cheap. The stand comes in two parts: You get the base and the post, which supports the figure. The base looks good, but it’s so light and flimsy feeling.

DSCN1148

The post snaps into the side of the platform and it features the same type of extendable wire piece that Hot Toys stands use to hold the figure’s crotch. The problem is that it positions the figure all the way in the back of the platform, leaving this large bit of empty floor in front of him. I suppose the idea here was that you could lay out all the accessories on the base in front of him, but I don’t want a bunch of little bits lying around like that, and so it’s just wasted space that pushes the figure back on my shelf. If the post came out of the middle of the base, I would have liked it a lot more. Actually, I would have been a lot happier with just a more functional figure stand and a cardboard illustration of the TARDIS for him to stand in front of.

DSCN1146

HANDS!!! The 10th Doctor was fond of carting about his spare hand in a bubbling jar, so why shouldn’t the 11th Doctor have a whole bunch of extra hands? “You Time Lords, you’re like worms. Lob a bit off and it grows back!” You get three pairs of mitts and they are replaced with the same post system as Hot Toys figures. The only difference is these hands are more soft and rubbery, so while the post sockets are actually smaller, I find the hands much easier to swap. I’m not a big fan of swapping hands on my figures, but some of these are definitely required if you’re going to pose him holding some of the accessories.

DSCN1132

DSCN1131

DSCN1130

As for the actual accessories… you get a whole bunch of stuff gathered from Series 5 and 6 episodes. Obviously the one thing The Doctor can’t live without these days is his trusty Sonic Screwedriver and you actually get three of these little beauties: The 10th Doctor’s Sonic and two versions of 11’s Sonic, one opened and one closed. They are simple enough pieces, as they are rather tiny, but the sculpts and paint on all three are pretty solid. I doubt I’ll have the 10th Doctors Sonic out of the tray much, but the other two will get a lot of use. The closed one will reside in his inside jacket pocket and the open one will likely remain in his hand.

DSCN1138

The “Lash Up” device is like a homebrew mobile phone. I have no recollection of this device in the series at all. Was it used in “The Girl Who Waited?” I just can’t place it. It’s a great looking little accessory, but I don’t have much use for it.

DSCN1144

Next up is the Nano Recorder. This is a gun-like device that The Doctor used to implant recorders under the skin of his team when going up against The Silents. It’s a device that didn’t have a lot of screen time, but at least I can remember it from the series context. Besides, if Character Options can make a roleplay toy based on it, I’m not going to harp on Big Chief for tossing it in as an accessory here. Once again, a cool little piece, but not one that I will likely ever display with The Doctor.

DSCN1137

DSCN1142

And then we have his handkerchief and the bit of exploded TARDIS. I’m pairing these up because The Doctor used the handkerchief to reach into the crack in time and pull out the piece of TARDIS. “Hey, Moffatt, I’m still waiting on you to explain that one! Why the hell did the TARDIS blow up???” Anyway, the handkerchief comes folded neatly and looks great. The chunk of TARDIS is arguably the best looking accessory because the paint work on it is really impressive. It looks genuinely distressed. Very cool!

DSCN1136

Ah, the Psychic Paper! We haven’t seen a lot of it lately. I know some fans complain that he uses it too much like a Get-Out-Of-Jail-Free card, but I think it’s a clever way to bypass a lot of explanations as to why he turns up where he’s not supposed to be. Besides, it isn’t nearly as annoying to me as the new Sonic Swiss Army Knife that somehow functions like a tricorder. That really, REALLY bugs me. I think it’s time to bring the Terileptils back to destroy that thing. Wait… where was I? Oh yeah, the Psychic Paper is just a cool little rubbery piece of plastic. I’ve been trained against the use of it by the Headless Monks, so mine is blank when I look at it.

DSCN1140

Moving on… we have the Time Lord Consciousness Cube as seen in “The Doctor’s Wife.” It’s basically just a little frosty transparent cube. Originally, it was inferred that it might light up, but it’s so small that would have been pretty tough to do. There’s not a lot to it, but it is a cool piece, and one that I may actually display with the figure from time to time.

DSCN1143

Last, but not least, is the invitation from “The Impossible Astronaut.” It’s just a tiny little envelope with a card inside, and yet it’s possibly the most impressive accessory here. It’s so damn tiny and yet all the little printing on it looks so great. The fact that it even opens and has the invitation inside is all the more amazing.

DSCN1149

And that wraps up the inventory of accessories. Cyberman not included! Honestly, after all the trepidation on my part, in the end I’m extremely happy with this figure. The quality of the figure’s body, the articulation, and most of all the likeness, are all well worth the money and as you see, you get a ridiculous number of accessories and extras. Sure, the tailoring on the costume can use some tweaks and bobs, It’s easily the figure’s weakest point, but even still, it’s a very solid effort for a first figure. I think Big Chief established themselves quite well with this initial offering and I’m very anxious to see what else they have coming. We’ve already seen pictures of the 10th Doctor and Amy Pond figures and we’ve seen lots of teasers from the upcoming 4th Doctor figure. I do believe I’m on board and I won’t be as hesitant to pull the trigger next time.