Avengers “Age of Ultron:” Scarlet Witch 1:6 Scale Figure by Hot Toys

Captain America: Civil War has been blowing up the box office for a few weeks now (I did my part, seeing it twice in Imax and once on a regular screen), and while Hot Toys has plenty of pre-orders up for the Civil War versions of The Avengers, a few of the last Age of Ultron figures are still trickling out. In the case of AoU Scarlet Witch, I’ve actually had her on my shelf for a little while now, and it’s long past time I check her out.

htscarw30

I already showed off the Hot Toys’ Age of Ultron packaging when I featured Hawkeye and Vision. This is the same deal only with a red deco and Wanda Maximoff’s lovely mug on the front of the box. It’s still basically a window box with an illustrated sleeve wrapped around it and while it looks attractive and certainly gets the job done, I can’t help but feel as if Hot Toys has been cutting costs in their package presentation while the prices of the figures continue to climb. All the goodies come on one tray and everything, as always, is collector friendly.

htscarw20

Wanda comes more or less ready to go right out of the box. You do have to put on her two necklaces, which require popping off the head, but that’s easy-peasy. The hair required a little futzing, but all in all I was surprised how little I had to mess with it to get it where I wanted it. In fact, Wanda is a very simple figure, but the costume hits all the right points. The outfit consists of a thin black dress over a black and pink lacy slip, a red leather jacket, leather arm bracers, tattered black stockings, and some chunky boots. While this is about as far from any of Scarlet Witch’s comic designs you can get, I like this look a lot for the MCU version of the character and I was glad to see her wear something pretty similar for a good part of Civil War.

htscarw21

The jacket is easily the most impressive of these sixth-scale garments. It’s beautifully tailored and textured and fits the figure perfectly. The coloring on it is also very nice, particularly the way it transitions to a darker color at the bottom. The costume design also does a good job of concealing most of the joints, preventing Hot Toys from having to go with seamless arms and legs. The stockings cover the knees, the bracers cover the wrist joints, and the jacket sleeves, well they cover the elbows most of the time, so long as your diligent about pulling them down while posing her. Still, with extreme elbow bends, you’re likely to see some hinge. If I were going to nitpick something it would be the boots. They look fine on their own, but if you compare them to say the sculpting on AoU Hawkeye’s boots, the detail here looks a lot more soft. It’s also worth mentioning here that while the boots don’t allow for lateral rockers, the rest of the costume is one of the least restrictive costumes I’ve seen on a Hot Toys figure in a long while. With no restrictions and very little fragility here, Wanda is a fun figure to play around with.

htscarw22

I’ve got no complaints about the portrait. Hot Toys has worked their usual magic here. I will say that I find the likeness can go from spot on to just very good, depending on the lighting and angle, but even Hot Toys’ “very good” is usually better than everyone else’s best, so I’ll happily take it. The skin tones in the face are superb and the paintwork on the eyes is downright eerie. While some collectors still fight against rooted hair, I’m a fan of it in certain cases and this was one of them. Yes, there are some fly-away strands, but I don’t think this would have looked good with sculpted hair. I haven’t used any product or actually did any styling… I need to draw the line somewhere. While the arms and legs don’t feature the seamless rubbery”skin,” the neck and upper torso does, so you can get some articulation out of the lower neck despite no visible joint there. I do wish they made the charms on her longer necklace out of diecast, as it would have weighted them better. As it is, the longer necklace doesn’t really hang naturally.

htscarw23

htscarw2

htscarw3

htscarw10

htscarw4

You know what time it is? It’s time in the Hot Toys feature where we talk about hands… lots of extra hands! Wanda comes with a total of eight, although in this case the count is weighted in favor of the right side. As many of you may know, I’m not an extra hands kind of guy, but in this case, the hands are actually a lot of fun, because some of them are very expressive and they tie in with her hex powers. The majority of the hands have red translucent finger tips to create the magic effect, and it works quite well. All of the hands come complete with all her sculpted rings. And that brings us to her other accessories…

htscarw17

htscarw7

htscarw19

Effect Parts! If there’s one thing I’m usually even more ambivalent toward than extra hands it’s effect parts, but once again Hot Toys surprised me here, and in more ways than one. The hex magic effect parts that come with Scarlet Witch are both frustrating, and ultimately fun accessories. These are sculpted in clear plastic with a nice shade of red mixed throughout. They are designed with a very specific use in mind, to have the effect trailing behind the hands. The instructions sort of show how this is done, but not very well and the way the pieces are designed to fit the hands isn’t at all intuitive.

htscarw14

htscarw15

However, with a little experimentation, I’ve found them to be pretty versatile and capable of creating some pretty neat poses. For people who like to have accessories that go in a proper way for a very specific look, these might prove more frustrating than their worth. But they had me playing around with Wanda a lot more than I usually do with a new Hot Toys arrival.

htscarw24

htscarw25

Finally, Wanda comes with Ultron’s heart. It’s a decent enough accessory and it allows you to create a pretty cool moment in the film, but it’s nothing terribly special. At the prices we’re talking about, I would have preferred something metal and maybe with an LED.

htscarw28

htscarw29

Scarlet Witch’s stand is patterned after the other Age of Ultron figures that I featured. The big difference here is that instead of a crotch cradle, it comes with a wire loop that hugs the figure’s waist, like a more traditional doll stand. The base is larger and more posh looking than the older Hot Toys stands, and I do appreciate that it offers a better sense of value. The only downside here is that it takes up more real estate on the shelf and doesn’t match the older Avengers figures.

htscarw8

htscarw5

htscarw27

htscarw26

I could go on about how any sense of value is slipping away as Hot Toys’ prices continue to rise, but if I’m still buying them, then I guess I shouldn’t be complaining and in the end, I’m going to pay what I need to pay to get the characters I want. One thing I wish Hot Toys had done here was do a discounted bundle on Scarlet Witch and Quicksilver, because I find that I wouldn’t mind having her brother on display with her, but there’s no way I would buy him on his own unless he hits some really deep discounts. And I can’t imagine that situation is out of the question. Of course, Hot Toys has already shown off their Civil War version of Wanda, and while it hasn’t made me regret picking up this figure (I’m big on getting first appearances), it has made me consider double-dipping on her.

And that should catch me up on my Marvel Hot Toys. I have Drax from Guardians of the Galaxy and Cap from Civil War on pre-order, but they aren’t due out until later in the year. I’d love to pick up Ultron, but I don’t think he’s going to be in my budget. Likely the next Hot Toys I’ll be featuring here on FFZ will be some of The Force Awakens offerings, which should be shipping sometime toward the end of the Summer. 

Ant-Man 1:6 Scale Figure by Hot Toys

I know, when I looked at Hot Toys’ Vision I promised I’d get to Scarlet Witch next, but then Ant-Man hit my stoop and no offense, Wanda, but I was just more excited to get to this figure and check him out, especially after seeing him in action again in Civil War. Of course, this is the outfit from the original movie, the one I prefer, and while no one knows what the future holds, for now it’ll be the definitive version of the MCU Scott Lang on my shelf. Let’s check him out…

htantm1

htantm2

The package consists of the same window box with illustrated sleeve around it that we’ve been seeing out of the Hot Toys Marvel line for a little while now. It feels rather simple for a $200+ collectible, but it gets the job done. And in this case the artwork really blows me away. It’s very stylish and to me it just beautifully reflects the quirky nature of what we saw in the closing credits. I also really dig the wrap-around title. You can lift off the sleeve to peek at the figure through the window, or you can open up the top flap with the sleeve still on and slide out the tray. Ant-Man comes mostly ready to go right out of the box. You just have to insert the tubes of Pym Particles into the slots on his belt and pop in the batteries (or not, as we’ll see it doesn’t make much of a difference).

htantm3

Man, do I love this costume design! It’s so cool that it almost makes up for the fact that Hank Pym was excluded from the MCU Avengers, something I was very sore about in the beginning. But this movie was great, MCU Scott Lang is a lot of fun, and this suit is absolutely killer, so all has been forgiven. When he first encountered it, Scott referred to the suit as “some old motorcycle outfit” and it does indeed look just like that. It’s got a deliciously retro-charm to it that looks high tech, while still conveying that it’s an antique. And we all know that if you give Hot Toys a great design like this one, they’re going to do it proud. The entire suit is crafted out of a leather-like material, which mimics the on screen appearance perfectly. The silver piping is gorgeous as is the red textured material on the chest, back, and shoulders. This is such a perfect blend of great design and near perfect execution, that it’s instantly become one of my favorite Marvel Hot Toys figures in my collection.

htantm23

One little feature that I like a lot about the costume is the way they recreated the ribbing in the elbows and knees. While this was certainly part of the suit design, it serves a double purpose on the figure, where I’m not afraid to keep an elbow bent for fear of distorting the suit material. It can be a problem on figures like Avengers Black Widow or even the Age of Ultron Vision, but I don’t think it will be a problem here. On the downside, the suit is fairly restrictive of articulation. Now, if you’ve been reading my Hot Toys Features over the years, you may have noted that articulation is never a huge concern of mine with these figures. Sure, better range of motion is always better, but for the most part I like to tweak the poses now and then and leave it at that. Besides, just about every HT figure I’ve ever owned has come with a page in the instructions warning not to move certain appendages beyond a certain number of degrees. In the case of Ant-Man, the biggest let down in the restriction for me is in the hips and that’s because I’m afraid of pulling the stitching in that groin area. Bottom line, don’t expect any extreme action poses out of Scott.

htantm5

htantm25

The helmet is a work of art in and of itself. Not only is the detail just superb, but the paint and weathering is right on target. The side arms that hold the mouth piece in place look particularly good and I really dig the bars that encircle the neck. The red plastic screens for the eyes even offer a pretty clear view of Scott’s eyes inside, which adds an extraordinary level of depth and realism to the portrait even when masked.

htantm24

From behind you can see the two thin wires that connect from the helmet to the small backpack. These pieces are designed to pull out of the helmet rather than allow themselves to be overly stressed. I think this was a good idea, because it wouldn’t take much to tear these pieces, however, it does mean having to reconnect them from time to time when manipulating the figure. That having been said, I found that I only had to do that a few times while shooting him.

htantm18

htantm19

htantm20

Of course, the coolest thing about the helmet is that Hot Toys went with an articulated helmet that allows for you to display the Scott Lang portrait without having to do a head swap. In fact, making the switch is incredibly easy. The face plate is held on by a magnet, so you just pluck it off and place it raised on the forehead. The arms that hold the mouthpiece rotate at the sides of the head and have ball joints where they connect to the mouth piece, so you just angle those downward. I’m not a big fan of swapping heads on these figures, so the ability to do it on the fly adds a lot of value to me. Plus, I think the likeness to Paul Rudd is one of their absolute best, so it would be a shame to hide it all the time.

htantm26

This figure has taken a lot of heat over its electronics feature, which is basically a light up mask. Some of that may be warranted, but I can’t get too worked up over it. The top plate of the helmet lifts up to reveal the battery compartment and on/off switch. Switching it on lights a panel in the forehead, which in turn shines through the eyes of the mask and out the sides. If you switch it on in anything close to a well lit room, it barely shows at all. Forget about getting it to show up on my studio staging area. The above picture was snapped with him on the display shelf, with the shelf lighting turned off and the room fairly dark and it looks fine to me. If the effect certainly isn’t blinding. I think it’s because they made it work with such a versatile head. Had they gone with an alternate masked portrait, like they did with Star-Lord, it would have certainly worked better. Me? I’ll take less effective lighting over the articulated mask any day. Let’s move on to the accessories…

htantm6

htantm13

HANDS!!! Oh, you know it! If it’s a Hot Toys figure, you’re going to get a ton of hands. Scott comes with fists, relaxed hands, and hands that look like he’s about to do the patented Captain Kirk palm strike. The most important hand to me is the right hand with thumb poised over the shrinking button and this is the one he’ll likely always be displayed with. You also get a right hand designed to hold some of the teeny-tiny accessories he comes with…

htantm14

…in this little tray of goodies. It’s also a little tray of goodies that resists opening enough so that it explodes and throws the tiny goodies all over the room when it finally does open. I’ll start off with those little bombs, because they’re pretty much staying right there in the tray. Nice little pieces, but I’ve got no use for them.

htantm7

htantm8

htantm21

htantm27

The vials of Pym Particles, all fit into the slots on his belt. You get two red and two blue. If I remember correctly it’s the red ones on the right to shrink and the blue ones on the left to enlarge.

htantm10

You also get the two discs that enlarge or shrink whatever they stick to. They’re super tiny, but Scott can hold them fairly convincingly in that one accessory-specific hand. I wish there was somewhere to attach these to the figure.

htantm15

Next up, you get tiny Ant-Man. And, yes, tiny Ant-Man is indeed tiny. He comes with his own little disc stand with indented spots for his feet, which hold him surprisingly well. Considering that I have no room on my Avengers shelf for the full size Ant-Man, this little guy will come in handy to stand in for him. For now, full size Scott will be hanging out with Falcon, Winter Soldier, and Captain America on the shelf below it.

htantm17

htantm16

And of course, you get the figure stand. This is the same type that came with the Age of Ultron figures, so it’s bigger than the old standard and overall feels more impressive. I actually like that they called out Scott Lang’s name on the tag.

htantm28

htantm29

htantm30

I’ve never been truly disappointed by a Hot Toys figure, so when I say I really love HT’s Ant-Man, I have to qualify it by saying this is without a doubt one of my favorite Marvel figures on my shelf. In terms of overall execution, I’d say he’s tied right now with Star-Lord as my overall favorite. The suit is recreated flawlessly and they went all out with the intricacies of the helmet. I can understand some collectors wanting a better light show out of the electronics, especially when you’re paying extra for them, but the ability to unmask the figure so quickly and easily without a head swap makes that trade off totally worth it to me. Ant-Man retailed at $240, which about the middle ground for Hot Toys’ releases these days and I think he was worth every penny. He sold out rather quickly at Sideshow, but he’s still available at a number of secondary online retailers, some of which have already begun to crank up their prices. On the next Marvel Monday, we’ll check out Hot Toys Scarlet Witch… for reals this time!

Avengers “Age of Ultron:” Vision 1:6 Scale Figure by Hot Toys

Yes, we already had Marvel Monday, but I didn’t want to interrupt my progress getting through the stacks of Legends figures in the corner. So, I decided to double up on Marvel content this week, because I’m also starting to fall behind on featuring my Marvel Hot Toys. Vision just turned up at my door this past weekend, and I’m pretty excited to check him out. I really dig what they did with the character in the film, although had they managed to keep him a secret, it would have completely blown me away when I saw it. Seriously, when he emerged from the casket, I probably would have screamed like a girl and rabbit kicked the seat in front of me in sheer delight. On second thought, probably better that they spoiled it.

htvis22

I have very little to say about the box, other then it’s the same window box with a sleeve around it that we saw with Age of Ultron Hawkeye. You get the usual character art, in this case a great shot of Paul Bettany looking every bit the part, and I like that the deco matches the packages for the other figures in this series. So, yeah, it’s attractive and serviceable, but it doesn’t feel up to par with the kind of presentation that a $220 figure warrants.

htvis1

Vision comes out of the box and ready to go. This is a relatively simple, but beautiful figure through and through. The rubbery body suit looks similar to what Hot Toys did for Man of Steel Superman, a figure which I admired a lot, but couldn’t bring myself to buy because I despised the film so much. The suit fits Vision perfectly and it strikes a nice balance between allowing for a surprising amount of articulation and still being tight enough to show the anatomy of the figure beneath it. The stitching is well concealed and while it can require some adjusting after re-positioning the arms and legs, it’s easy to get back into it’s natural state.  You get some nice piping throughout the suit and the coloring, along with the different tones of red patterns, looks perfect to me. The texturing on the suit is also quite striking.

htvis21

htvis10

In addition to the suit itself, you get the plastic gorget around the neck, along with the wrist bracers, all of which are cast in plastic and painted with some sumptuous gold and a vibrant, metallic shade of… I’m not sure what to call this… magenta? Either way it’s beautiful. The boots are similarly colored, although a little closer to maroon and since the feet peg into the legs, and the upper part of the boots are sleeves, they allow for a decent amount of articulation in the ankles.

htvis2

htvis7

The cape… oh boy, am I torn on this cape! Taken on it’s own It think it looks great on the figure. it has an interesting, almost Art Deco pattern printed throughout and it’s pleated where it attaches to the figure so that it’s natural state is almost entirely collapsed behind the figure. Overall, I like it. On the other hand… as a recreation of the cape we saw Vision wearing in the film, it’s a complete failure. Now, I’m pretty sure that cape was CG, so I’m willing to cut Hot Toys some slack here, but given the price of this figure, I think they could have gone for a material more like silk, which would have better approximated the on screen look. With all that having been said, this cape features some wires running through the edges that does allow it to work with some dynamic poses.

htvis4

htvis5

htvis6

While I may take issue with the cape, I’ve got no such qualms about the portrait. I was really interested to see how this one was going to turn out, as Hot Toys have more or less nailed the human element and skin tones of their figure portraits, but here was something entirely different. I’m not sure whether this qualified as being easier or more difficult, but whatever the case I am very pleased with the result. This is most definitely Bettany in the make up. The sculpt is beautifully realized from the panel lining right down to the subtle texturing around the eyes. And those eyes definitely contain that eerie Hot Toys spark of life. As for the rest of the head, you get more of that gorgeous magenta paint along with some green to match the suit. I would have really liked to see a light up feature in the Infinity Stone. At a price like this, I think that was warranted.

htvis11

htvis3

htvis8

In terms of accessories, well… we aren’t talking a heck of a lot. You get the usual parade of hands… four pairs total. In this case it’s a pair of relaxed hands, a pair of splayed hands, a pair of fists, and a pair to hold Mjolnir… which conveniently brings us to the only other accessory…

htvis12

htvis13

Mjolnir is most likely re-purposed from one of the recent Thor figures, presumably the most recent Age of Ultron release. I only own the original Avengers Thor release from way back when and it has some notable differences from the hammer that came with that figure. It’s still diecast and it still has the lanyard. The biggest differences are in the handle sculpt. I won’t say it’s better or worse, just different. I love that Hot Toys included Mjolnir with the figure, particularly because of the way it was used in the film. The early scene where they’re establishing the link between worthiness and being able to lift the hammer seems to be played for laughs, but then it cleverly comes back to establish trust in Vision later on. Brilliantly done and to be honest, I can’t think of any other accessories that could have been included here.

htvis15

htvis16

Vision comes with the new(ish) type of stand that was introduced to the Marvel figures with Guardians of the Galaxy and Age of Ultron. These are bigger and classier looking than the old style, which is both good and bad. From a presentation standpoint, I feel these offer more value. They’re sturdier, have nicer name plates, and while some have balked at the stickers, I think they look fine. On the downside, these do take up more real estate on my shelves and my OCD doesn’t like that they don’t match the older figures. This one, however, has the nice bonus of offering a swap-out flight stand with waist grabber…

htvis19

htvis18

htvis17

This is similar to the one that came with my Winter Soldier Falcon figure only not quite as long. The stands are easy to swap out from the base and yet they hold very firm. Considering how light the accessories are with this figure, I’m glad Hot Toys decided to include this. It does help justify where some of the extra money went.

htvis14b

htvis9

I really am in love with this figure, even though the cape keeps it from being perfect. Granted, there have been third-party capes produced for Hot Toys figures before and here would be a great opportunity for another. Then again, I’m usually too much of a pussy to try even simple custom jobs on these figures, so I’m happy to leave it the way it is, because I truly don’t mind the way it looks on the figure, only that it doesn’t look screen accurate to the film. Everything else about Vision is beautifully crafted and he really pops on the shelf even when surrounded by his fellow Avengers. As for the price, Vision retails at $220, which is pretty much the low end of the spectrum for Hot Toys pricing these days. Unless your Quicksilver, in that case they knocked another ten off because he’s Quicksilver. I shouldn’t poke fun at it, because I’d be lying if I said I wasn’t considering him as a purchase, if nothing else as a companion piece ot the next Hot Toys figure I’ll be looking at… Age of Ultron Scarlet Witch. Hopefully next week…

Iron Man: Movie Masterpiece Diecast Mark III Armor (MMS 256 D07) 1:6 Scale Figure by Hot Toys

I’ve got more Hot Toys business to take care of before returning Marvel Mondays to its regularly scheduled parade of Marvel Legends figures. Actually, it might be a couple more weeks before I get back to Legends, which is fine because I’m at least a couple of waves behind and it’ll give me a chance to get caught up. Today, I’m looking at a figure that’s been on my shelf for a little while now, but I’ve only recently got the time to give its proper due. It’s Iron Man, a character that Hot Toys must thank god for every day because they’ve probably made enough money off of Tony Stark to buy themselves a small chain of islands.

htdcim25

This is only my second figure in Hot Toys’ Diecast Series, the first being Robocop. The packaging here is very similar. You get a snazzy laminate top with line drawings of the armor. I really dig the art design on this package. In fact, I’d dare say it’s my favorite box out of any of my Hot Toys figures. The top three-quarters or so of the box lifts off to reveal the styrofoam cube that holds the goods quite securely. The sheer weight of the box is certainly impressive and this definitely feels like a package befitting of a $300 collectible. The original version of this figure came out in 2008 and was all plastic, so we can only assume that Hot Toys is going to be double dipping on as many of these armors as possible by upgrading them to diecast. After all, they couldn’t milk that House Party Protocol shit forever.

htdcim1

htdcim3

Here it is, the armor that started it all. Well, sort of. The Mark I was the DIY monstrocity that Tony built in the cave, and the Mark II was the bare metal predecessor to this suit. But here’s the first armor worn by Tony Stark that bore the iconic red and gold in the MCU. While I was really partial to the Mark VII for a while, I always come back to this one as my favorite. I think it’s the lovely contours and less angular nature of the design that really does it for me. It’s not overly busy, it’s well proportioned, has clean lines, and the deco has just the right mix of red and gold in it for my liking. The base figure is stunning and it’s the paint that grabs my attention first. This is as close to a new car finish as one can imagine and the quality control here is stellar. There isn’t a blemish to be found on my figure’s paint to speak of and that in itself is rather impressive. In hand, the figure has a satisfying heft to it, even if most of what you’re touching when you handle the figure is plastic. About the only thing here to dispel the illusion that this is a shrunk down Mark III armor are the three screws visible on the back needed to access the battery compartments.

htdcim8

htdcim4

htdcim10

There are plenty of little bells and whistles on the suit to enhance its display options. The chest piece and lower abdomen plate are removable to show off the beautiful detail under the armor. These are both held on by tabs and are pretty easy to remove and yet stay firmly in place when handling the figure. The flaps on the upper back are all articulated and can lift up. And the back of the lower legs are also hinged and can be opened to reveal all the mechanical intricacies of the suit’s inner workings. I can’t imagine actually displaying the figure with any of these opened, but it makes for a wonderful experience when handling the figure or showing it off to friends. Of course, these parts also demand extra care when playing around with the suit.

htdcim2

htdcim5

The helmet looks outstanding and I really dig the exposed linkages around the “collar.” The faceplate is held on by magnets and can be removed to access the switch for the helmet lights. Of course, if you’d rather go with the Tony Stark open helmet look, this figure has you covered with an alternate head.

htdcim13

htdcim14

htdcim12

It’s a simple ball joint pop-and-swap and very easy to do. The portrait here is excellent, but then again, Hot Toys has been doing enough Tony Starks at this point that their sculptors should be able to do his likeness in their sleep. This head also comes with a magnetic faceplate, which can be attached to the top so that it appears “flipped up.” While the visor is intended to sit on top of the helmet,  it can also be placed over the face for a closed helmet look, but it’s not a perfect fit and leaves a slight gap down near where the mouth is. Even with the tiny gap, though, I think it’s an acceptable option, particularly if you want to go from a closed to open look without bothering with the head swap. Of course, with the alternate head you won’t get the option for the eye lights.

htdcim7

Speaking of lights, the Mark III has four separate light points on the figure: The Repulsor Beams in the palms, the Arc Reactor in the chest, and the eyes in the head. Each of these have their own independent battery compartment and on/off switch. The switches for the helmet and chest are concealed behind plates, while the ones for the hands are fairly well hidden under the forearms. The lights are pretty bright and visible even in a well lit studio. I also appreciate the fact that they were able to make the Repulsor Beams light up and still keep the swappable hands. There are a total of three pairs of hands. You get one set of fists (non-lit), one set with individually articulated fingers, and one set of open palm angled up to simulate him firing his Repulsors.

htdcim6

htdcim35

The articulation on the figure is quite good, but it requires a lot of care. There are plates on the shoulders and hips that are attached to hinged flaps to keep them from hindering the limb movement, but it’s pretty important to work these out of the way manually as you pose the limbs. The care is not only to prevent paint scrapes, but to protect the potentially fragile hinges on the plates themselves. The result is that as satisfying as the articulation can be, moving each point can sometimes feel like an event in itself. The engineering, however, is designed to help as much as possible. The arms will pull away from the shoulders to allow for some clearance and the legs will actually pop completely off of the hip ball joints to avoid breakage. Of course even with all these points of articulation, it would still be physically impossible to get the suit into the iconic ground-pound pose. But fear not, because Hot Toys went above and beyond to accommodate by providing an extra lower torso that’s bent in a way to allow for the ground-pound. I love that they did this, but it’s quite a lot to go through and my personal results were a little lacking.

htdcim9

Hmmmm. It’s close… but not quite. Now I’ll concede I have seen plenty of pictures of this figure in a perfect ground-pound. It’s definitely capable of it, but I just wasn’t willing to risk my figure to try to get a pose for a couple of shots. Indeed, I doubt I’d ever go through the trouble to try again. The process involves removing both plates from the front torso, then pushing a release button to wiggle off the top of the torso, so you’re basically pulling the figure into two halves. The first time I did it, it was a nerve-racking experience, because I just didn’t know how much force I was supposed to be exerting to get the figure apart. Next another release button detaches the lower torso. Now you pop in the new lower torso, put the two halves of the figure together, replace the front torso plates, and do some very scary extreme posing of the left hip to bring the knee up as high as it will go. Now, everything goes back on really easy, and a subsequent attempt at the process was less stressful because I knew what was going to happen, but there’s still the fear of damaging something when grasping the figure tightly enough to do all this. There are just so many moving parts on the figure and so much potential for breakage. In the end, I appreciate the effort, but I’m content to leave it at that.

htdcim20

htdcim19

The rest of the figure’s accessories include optional display pieces featuring his various deployed weapon systems. You get the shoulder missile packs, the countermeasure systems on the hips, and arm rockets. The shoulder packs look great and are hinged for elevated targeting. The hip pieces are a nice touch, but it’s a rather subtle change. The shoulder packs are super easy to swap out, whereas the hip pieces can be a little stubborn to remove.

htdcim21

htdcim17

htdcim18

The arm rockets are my favorite of the three weapon systems. I love the way they make the plates look like they actually shifted and the paintwork on the little rockets is beautiful.

htdcim32

htdcim33

htdcim31

The figure comes with a very impressive stand. It’s designed to look like one of the alcoves in the Hall of Armor, complete with sculpted areas where the feet go. You get a very strong post with a waist grip that is spring-loaded and features foam to gently grasp the figure. The base even lights up. As magnificent as the stand is, I’m rather torn on it. It works great for a totally stiff, museum style pose, but it’s very singular in its intended purpose. If you want to go for something more exciting, the placement of the feet on the stand comes off looking awkward.

htdcim34

htdcim24

htdcim36

The Diecast Series figures run right around the $300 point. This figure was actually $309. When you consider that the average Hot Toy figure is hitting the $220-250 mark these days, I don’t think the increase in price is all that bad for what you’re getting. Granted, I only have this one and Robocop, but keep in mind the $300 range is about as high end as I get, and both figures have left me more than satisfied. Indeed, both figures are absolute works of art and I’d consider them the finest pieces in my collection. And if there was ever a perfect example of why my Hot Toys Marvel collection is a rather eclectic collection of appearances, the Mark III here is it. There’s no way I can afford every release of every character and so I try to curate my favorite versions and appearances. That’s why I have a First Avenger Cap over an Avengers Cap and that’s why this is the first Iron Man armor I bought. That doesn’t mean I won’t be looking at the Civil War suit in the upcoming year and depending what my financials look like at the time, I’d be open to getting a Diecast Mark VII if and when Hot Toys ever gets around to it.

Avengers “Age of Ultron:” Hawkeye 1:6 Scale Figure by Hot Toys

Marvel Legends has been totally dominating Marvel Mondays lately, so let’s go for something different today. I was really hoping to be looking at Hot Toys’ Scarlet Witch right around now, but they keep bumping her back and now it looks like March is Wanda’s new target date. So, let’s look at Hawkeye instead. This figure has been out for a little while now, but the fact that it took me this long to get to him shouldn’t be taken as an indicator of any lack of love for the character or Renner’s portrayal of him in Age of Ultron. He had a lot of great moments in the film and they were well deserved considering he spend so much of the first Avengers as a brain-washed Loki-lackey. It was nice to see him take the center stage for some of the new film and considering how expensive the first release has become on the secondary market, this is a release that really needed to be out there.

hthawk13

While I’m no stranger to Marvel Hot Toys, this is my first HT figure from the Age of Ultron film, so the package design is new to me. The figure comes in a window box with an illustrated sleeve wrapped around it. I do prefer the shoebox style as they tended to be more durable and feel more like premium packaging. This isn’t bad, though, and honestly I really just keep the packaging as a place to hold all those extra bits that never make it to display. The front of the sleeve has a picture of Hawkeye in action with the Age of Ultron logo and points out that this figure is #289 of the Movie Masterpiece Series. There are a lot of goodies in this box, so let’s get started with a look at the figure itself.

hthawk14

Hawkeye sported two costumes in Age of Ultron, one being close to his original Avengers look and the other being this snazzy new jacket. I like this look a lot, as it’s sort of a mix between a trench coat and a modern take on the medieval arming coats worn by archers in the old days. The tailoring on the new outfit is superb right down to the reinforced sleeves (complete with straps and buckles) and the T-shirt he wears under the jacket. The zipper is a bit big, something that Hot Toys still struggles with, but it’s mostly concealed under the flap, so it’s not an eyesore. The extra padding on the jacket looks great, as does the purple nods to the character’s comic costume. I was afraid that the bulky jacket would be puffy and restrictive, but it’s neither. It’s a beautiful form-fit for the figure and as far as costumes go, this is one of the least restrictive outfits that I’ve seen on a Hot Toys figure in a while.

hawkht1

hthawk15

The back of the jacket has another zipper, which I find is best left undone to allow for a wider range of hip movement. Also, there’s a cool mesh liner that can be seen through the gap, which just furthers my respect for whoever tailored this thing. The jacket also features a plate to attach the quiver. The pants are also beautifully done, with knee pads and reinforced patches, and the boots exhibit some great sculpting, especially in the laces . While technically accessories, the speed-loaders are as much a part of the costume as anything else. These are magnetic pieces that adhere to the outside of the boots. They stay on quite well unless you bump them, but occasionally I had to re-position them while I was posing the figure.

hthawk6

The portrait on the original Hot Toys Hawkeye was pretty damn good, and I think this one pushes the envelope a little further. As with all of Hot Toys’ portraits, they tend to have a certain sweet spot that really drives the likeness home, but I’m pretty satisfied with this one all across the board. The realism in the skin tone is downright eerie and I especially like the hint of five-o’clock shadow. Very nice.

hawkht2

If you prefer your Hawkeye with shades, there is a pair included with the accessories and they fit the figure perfectly. I’m really tempted to go with these as my default display, but then I feel guilty covering up any part of the hard work they did on the face sculpt and paint. Moving on to the rest of the accessories…

hthawk2

Holy crap, look at all this stuff! In addition to three sets of hands (What? Only six hands? Oh, Hot Toys, you’re slipping!) You get a regular bow, a collapsed bow, two pieces that make up the quiver, a crazy number of arrows and shafts, an assortment of three basic tips, and another assortment of Clint’s “special” arrow tips, which include the one he used on Scarlet Witch when she tried to fiddle with his brain. At first, I thought a lot of this stuff was extra, but by the time I was done filling the quiver, I was left with one arrow for the outside slot and one for Clint to knock into the bow, plus the specialty tips.

hthawk12

hthawk8

It takes a while to load up the quiver, but the end result looks amazing. The instructions show you how to position everything and since all the tips are removable, you can customize them to your heart’s content. Twelve of the arrows are complete arrows, and eight are just shafts to fill out the quiver. Once the arrows are all loaded, the two halves go together with the help of magnets and some pegs. The entire thing then slots into the plate on the jacket making it very easy to attach and remove. All the complexity and effort that went into the quiver is one of the things that really make these figures shine. They could have just as easily just sculpted the quivers and arrows as one piece and had one or two be removable, but it wouldn’t have looked anywhere near this good.

hthawk16

The collapsed bow is one of those neat extras that sadly I will probably never use. It’s a beautiful piece with loads of detail and a checkered purple and black finish. The folded parts of the bow are on actual hinges too, making it really feel like it could deploy into the full weapon.

hthawk17

hawkht5

hawkht10

Of course, the full bow is the baby that he’ll be displayed with and it is indeed a sexy piece of kit. It has the same checkered finish as the collapsed bow and it’s strung with just enough slack and elasticity that I’m not afraid to pose him with it drawn. Although, it’s probably not recommended to keep it drawn for long periods of time. It also functions surprisingly well. While posing him I accidentally fired off more than a few arrows and they had quite some distance on them.

hawkht7

hawkht3

The figure comes with relaxed hands attached, but I imagine that I’ll be keeping the ones designed to work with the bow on him most of the time. My only gripe here is that the fingers designed to draw the bow doesn’t have any spaces between the fingers. As a result, you have to knock the arrow into the string above or below the hand instead of between the fingers. This is easily fixed with a straight razor cut between the fingers, but I’m not sure I’m going to do anything that extreme.

hthawk3

Naturally, Hawkeye comes with a figure stand. This is the first of my Hot Toys Avengers to not feature the traditional black oval stand. Instead, it’s more in style with what they used for the Guardians of the Galaxy figures. There’s a silver name plate with the AoU logo and an illustrated surface with the Avengers “A.” I like it, it offers a lot more room to display the figure, but I’d be lying if I said the different stands on the same shelf doesn’t annoy my OCD.

hawkht12

hawkht11

hawkht9

Hawkeye was the last member of the core team that was missing from my Hot Toys Avengers shelf. I didn’t start collecting these beauties until a good deal of the original Avengers figures had already sold out, so being able to finally add Hawkeye to the team is a big deal for me. He’s a fantastic figure, which usually goes without saying when it comes to this line, but more importantly, he comes with a very satisfying collection of accessories, and that’s something that’s been missing from a lot of Hot Toys’ releases lately. When you take into account all those extra bits, plus the beautifully tailored outfit and solid likeness, the $219 price point actually feels reasonable. Or at least as reasonable as you can get in the high end action figure market. I’ve certainly paid more for less. Of course, it doesn’t hurt that I spent around $110 worth of Reward Points, bringing him down to a $109 steal. Now hopefully in a couple weeks, I’ll be able to revisit Hot Toys’ Age of Ultron line with a look at Scarlet Witch, with Vision due to follow on in April.

Guardians of the Galaxy: Rocket and Groot 1:6 Scale Figures by Hot Toys, Part 2

Yesterday I took a look at Hot Toys’ Rocket Raccoon and, as promised, today I’m back to look at his giant buddy Groot! We already checked out the packaging, so let’s just jump right in…

rrgroot16

Hoo boy, is this a big and weighty figure! Even with a bit of a hunch, he stands a full head and shoulders above your average human sized Hot Toys figure. That’s doubly impressive considering that every tiny spot of this figure is covered with sculpted bark. The look and texture of Groot’s skin is beyond realistic. When I touch it I fully expect to feel wood rather than plastic. And it’s not just the wood grain on his skin, but the vines and tendrils that wrap around his arms and legs and the little sprigs that randomly crop out form various places on his body. This is a sculpt fashioned with love. I have no doubt of that!

rrgroot19

The paintwork is also phenomenal. There are subtle shades of brown for the bark and green for the vines. I think my favorite thing about the paintwork, however, is the little hints of green around some of the bark pieces, which looks like moss growing on an overturned log. Simply stunning.

rrgroot17

rrgroot18

The stock portrait is Groot’s regular stoic expression, which is a dead ringer for his big screen counterpart. Again, it shows that the wizards at HT are not only good with human likenesses, but can recreate just about anything in plastic. The painted eyes definitely have that spark of life and while I don’t like to throw the word around to often, this portrait just strikes me as perfect.

rrgroot25

The alternate portrait, which I believe is a Sideshow Exclusive, is his angry face, and boy you don’t want to get Groot angry. In this case, it’s not a complete head swap, but rather the front of the face comes off, sort of similar to the way Figuarts and Figma does it. If you’re going for an action pose on the shelf, this portrait really sells it.

rrgroot20

rrgroot21

Articulation consists of a lot of really chunky and powerful rotating hinges. He also has a ball joint in the upper chest. While the smooth hinges are visible in the elbows and the backs of the knees, Hot Toys went a long way to try to conceal the rest. The hips, for example are shielded by some bark plates attached by hinged arms. I love the little touches like that!

rrgroot22

rrgroot23

rrgroot24

In addition to the extra portrait, Groot comes with some extra hands, of course! The figure has a pair of relaxed hands attached when he comes out of the box. The second pair are angry, grabby hands. You also get an extra right hand with translucent fingers to simulate him blooming those glowy spores. You also get an extra pair of wrists posts in case you snap one off. Good thing too, because I snapped one off. With nearly 20 Hot Toys figures on my shelves, that’s the first time I’ve ever had that happen to me.

rrgroot28

rrgroot27

rrgroot26

Groot comes with the same style stand as Rocket, which also matches the ones used for Gamora and Star-Lord. In this case the rod and waist clamp makes perfect sense to handle this tall and rather heavy figure. However, you also get a very clever connecting piece, which allows you to attach Rocket’s stand to Groots and pose the little guy riding on Groot’s shoulder.

rrgroot29

rrgroot30

“Quit waving to the camera. Yer making us look like a bunch of idiots!”

If ever I needed a reminder that I collect Hot Toys figures as a form of art, Groot is the figure to do it. The sculpting, attention to detail, and overall craftsmanship on this piece really is awe inspiring. And while the $360 price tag here is no small thing, it’s hard for me to believe that the character could be done better justice in a more expensive statue. Indeed, the fact that Groot turned out so wonderfully allows me to push a little of the cost of this set into his column and away from Rocket. Hey, whatever I have to do to sleep at night, right? Don’t get me wrong, they’re both great figures, and I couldn’t imagine displaying one without the other, but Groot is without a doubt the star here. Hot Toys’ has been killing it with their Guardians lineup ever since Star-Lord first shipped and while I’m still a little disappointed we won’t see a Ronin or Nebula the Guardians themselves have been a welcome treat. And that just leaves the question: Where’s Drax? While the figure remains in licensing limbo, a new prototype was shown as recently as July and is currently pencilled in for a 2016 release. I feel pretty confident he’s coming, but for now nothing has been set in stone. Why would it be set in stone? Shut up, Drax, it was a metaphor.

Guardians of the Galaxy: Rocket and Groot 1:6 Scale Figures by Hot Toys, Part 1

With some new Hot Toys figures rolling in, it’s long past time that I get around to reviewing this pair of figures from Guardians of the Galaxy. Seriously, this pair has been on my shelf for so long that I forgot I never gave them the spotlight. So, in keeping with the theme of Marvel Monday, I thought I’d put off my return to the Legends Hobgoblin Wave just one more week in favor of these beauties. These figures were available separately or together in the bundle I’m looking at today. I’m going to kick things off with a look at the package and Rocket, and tomorrow I’ll swing back and look at his arboreal buddy, Groot.

rrgroot1

Holy hell, that’s a big box. I mean, I’ve yet to buy a Premium Format Statue, so everything is relative, but still. It’s big! It’s not quite as big as Hot Toys’ Hulk, but it’s no slouch either. It’s taller than a regular Hot Toys figure box and more than twice as wide. Surprisingly, everything comes laid out in a single tray and that includes both figures, two stands, an alternate head and hands for Groot, alternate hands and feet for Rocket, Rocket’s gun, and a pair of potted Baby Groots. The deco is designed to match the look of the Star-Lord and Gamora boxes, and that makes me happy because I actually save these packages and my OCD gets aggravated when things don’t match. The star-field and grid background still remind me of the kind of 80’s cheese you’d see on a VHS tape sleeve or PC game box. Hopefully that’s intentional. The character art of Rocket & Groot is fantastic. The only complaint I have about the packaging is that the box itself is made of pretty light cardboard stock and for a box this big, it tends to get shelf worn pretty easy.

rrgroot2

Rocket is a rather unconventional Hot Toys figure, what with him being so small and being a rodent. He features fully sculpted fur, which was a sticking point for me until I got him in hand and realized it was the right way to go. Doubly so since I’ve seen some rather dubious pictures of their flocked Chewbacca figure. Instead, there isn’t even the tiniest space on this figure that doesn’t feature some sculpted detail and that’s impressive. Rocket’s costume consists of his little orange jumpsuit, which is cloth and beautifully tailored. I imagine it’s hard enough to tailor 1:6 scale clothes, so I’m doubly impressed with all the little stitching on this smaller raccoon space suit. It’s also reinforced with all the plates, shoulder pads, and harness seen on the big screen outfit.

rrgroot3

rrgroot9

rrgroot4

The portrait features Rocket with a rather fierce look on his little face. I like it a lot as it shows some wonderful little sculpted teeth and I think it captures his personality quite well. Although considering his size, it seems like HT should have ponied up for an alternate head. It doesn’t feel absent in this two-pack, but certainly in the single boxed figure. The wire whiskers are a great touch and the glossy paint on his nose makes it look appropriately wet. Hot Toys is no stranger to producing life like eyes on humans, but it turns out they can do some mighty fine peepers on a raccoon as well, because these look great.

rrgroot8

The articulation feels more like a conventional action figure than a usual HT product, but that’s a given considering his size. I don’t usually go into detail on articulation with my HT figures, because the points are covered up and it’s not a sticking point with me on these figures. With Rocket, it’s pretty easy to see what’s there and he’s pretty much got rotating hinges all around and an extra ball joint at the base of his neck. The tail is a straight ball joint and it does have a habit of popping off when posing, but it just pops right back on again. The figure stands surprisingly well on his tiny little feet and appropriately enough, you can use the tail to counterbalance him.

rrgroot7

rrgroot5

It wouldn’t be a Hot Toys figure without extra hands, would it? No exceptions for raccoons! Rocket comes with a pair of relaxed hands, a pair of adorable little fists, a pair of hands designed to work with his gun, and a pair of feet. The extra feet remind me of the “action feet” that Sideshow used to include with some of their 1:6 Scale GI JOE figures as a substitute for articulation in the middle of the foot. Options are nice, but I frankly have no need for these.

rrgroot11

rrgroot13

Rocket comes with his trusty rifle, which is about as tall as he is. The attention to detail that HT put into this piece is almost ridiculous and in the few short years that the flick has been out, this weapon has become as iconic to me as anything in Star Wars. I should note that I found it extremely difficult to get Rocket’s gun-gripping hand around the grip and now that I have, I doubt I will ever take it off, even if I swap hands. Ah, but y’all know me and the fact that I don’t often use a lot of the extra hands and I can’t imagine ever wanting to display Rocket without his weapon.

rrgroot14

rrgroot6

I might as well talk about the Potted Groots here, because I see them mostly as accessories for Rocket. The original solicitation for this set advertised a Potted Groot as the Sideshow Exclusive for this set, but it does indeed come with two. One is just the stalk with the head and the other has his arms out like he’s dancing. These are beautifully crafted little pieces and I always have one of them displayed on Rocket’s base, even though the big Groot is behind him.

rrgroot15

Speaking of bases, Rocket comes with the same style of figure stand that we saw with Star-Lord and Gamora. The only difference is rather than the crotch-cradle stand, Rocket features a transparent rod that plugs in and an adjustable gripping claw for the waist. This style of stand may seem like overkill for the little raccoon, but Hot Toys went this route for reasons that will be clear in tomorrow’s wrap up.

rrgroot10

rrgroot12

I usually talk financials at the end of a Feature, but I’ll toss it in here because it pertains mostly to Rocket. As part of the $360 set, Rocket’s price seems palatable to me, because in my head, I’m figuring Groot could be a $260 figure, but the $160 HT is asking for Rocket alone seems outrageous. At that price, he should have come with a second portrait and possibly even the Hadron Enforcer to sweeten the pot. It’s not a question of quality or craftsmanship, because that’s certainly all there, but when I consider that some of my first full sized Hot Toys were around $160-170, I just can’t see where all the money went. Maybe it’s a moot point, because I can’t imagine too many people buying Rocket without Groot and like I said, in my mind the two-figure bundle seems more reasonable, at least as far as Hot Toys prices are concerned.

Tomorrow, I’ll be back to check out Groot!

Captain America The Winter Soldier: Stealth STRIKE Suit Captain America 1:6 Scale Figure by Hot Toys

I’m way behind on my Hot Toys Features, mainly because I need to work myself up to tackling these figures on account of me still being in awe of them. Yeah even with about 20 of these beauties on my shelf they still tend to intimidate me. Anyway, today’s figure has been kicking around FigureFan Central for a while, patiently waiting his turn, so it’s long past time I gave Cap his due.

htstrike1

This is my third Hot Toys figure from the Winter Soldier film and I really love what they did with these package designs. Sure, it’s the same old shoebox style box with an illustrated cardboard insert over the tray, but it’s the deco that sells me on these. It’s very in line with the cool art direction seen in the credits. The front of the box features Cap in a typically heroic pose. But who am I kidding? Cap is one of my life long heroes and he would probably still look heroic to me eating a hot dog and dribbling mustard down his shirt. The back of the box features the names of some of the people who worked on the figure and all the boxes from the Winter Soldier figures look uniform when lined up on the shelf. As always, everything is collector friendly.

htstrike2

I’ve made it no secret that I adore this movie and that I love this particular costume design. It’s a wonderful nod to the outfit worn in the comics when Cap simply went by Steve Rogers, or just Captain, and I loved that he wore this specific costume when he was basically working as SHIELD’s lapdog, but questioning whether what he was doing was right. Up until now I’ve successfully avoided double-dipping on any one character when it comes to Hot Toys, but this was one I couldn’t resist. And oh man, did Hot Toys do a beautiful job with this costume!

htstrike3

htstrike4

As we’ll see in a little bit, this release is not heavy in extras or accessories, but that’s alright by me because they went all out on the costume. The material is a lush dark blue with a sight sheen to it in the right light and features some amazingly intricate stitching all over the place, but particularly in the abdomin and upper legs. The metallic silver star and striping across the chest contrasts beautifully with the darker material and he has some red stripes running down his sides from his underarms all the way down into his boots. You get a tiny SHIELD emblem on his right sleeve, his name badge on his left sleeve and a stylized American flag on his left shoulder. The costume fits the figure beautifully and the tailoring is top notch.

htstrike6

htstrike5

Extra bits on the costume include a shoulder rig for his shield and a leather belt with pouches and a silver belt buckle. He also has sculpted plastic guards for his knees. His hands feature sculpted finger-less gloves and his boots have sculpted belts and buckles running up to the tops. The only downside of the costume is that it is rather restrictive in the upper body, even more so than most Hot Toys figures. I’m sure if I carefully worked on it, I could get more articulation out of it, but I’m not willing to risk pulling any stitching in the top. From the waist down things are a lot more forgiving due to the slightly baggier military style cut of the trousers.

htstrike7

The figure includes only the masked portrait, with an unmasked available if you bought the two pack with civilian Steve Rogers. This is my second Cap from Hot Toys, with the other being from his first movie, and I’d say this one shows some marked improvement over what was already a pretty fantastic sculpt. There’s a little more definition in the facial features on this one, particularly around the mouth, but otherwise I think HT took the “if it ain’t broke, don’t fix it” route and that’s fine by me. Of course, this version of the helmet and mask is more detailed than the “First Avenger” version and that allowed HT to strut their stuff a little more with the sculpt. There’s some great texturing under the eye-holes and there’s just the right amount of weathering on the helmet itself and the chinstrap.

htstrike8

htstrike9

Obviously, Captain America comes with his shield and in this case it’s the more muted blue and silver one designed to be a little less apparent on his “stealth missions.” The paint looks great and since it isn’t plated, it shouldn’t have the flaking problem that eventually struck a lot of our “First Avenger” Cap shields. It’s made from diecast metal and the reverse of the shield is almost identical to the previous releases, which means it looks totally authentic, but this time the straps are a little more forgiving. In fact, I find that I don’t even have to pop the hand off to get it onto his arm, which makes things a lot easier. You also get a hook, which allows you to easily hang the shield on his back. Since I have my other Cap holding his shield, I’ll likely display this one wearing it on his back.

htstrike12

It wouldn’t be a Hot Toys figure without a ton of hands and that’s certainly the case here. You get a total of five pairs, all with the same sculpted, fingerless gloves. Theese include: Fists, relaxed hands, grabby hands, and splayed finger hands. You also get a pointing right hand. A pair of extra wrist posts are also included just in case you snap one… or two.

htstrike14

htstrike15

The accessories are rounded out by a rather useless magnetic cuff, the one used in the elevator scene, and a little stick that lets you make adjustments to the costume. I can’t really think of anything else he needed to come with, other than maybe the thumb drive with Zola’s algorithm. The extra unmasked head would have been a nice bonus, but I can understand them withholding that to sell the two-pack.

htstrike13

htstrike11

htstrike10

htstrike16

htstrike17b

STRIKE Cap is an excellent figure and easily lives up to my high expectations. And speaking of high… he retails at about $220, which is really starting to push the limit for me. The craftsmanship is certainly there, but he’s mighty light on the accessories when compared to figures like Falcon and Winter Soldier, which retailed for only about $10 more. I get that there’s a thing called inflation, but I find that my comfort zone for these figures is around $200, give or take ten bucks, and we seem to be getting further away from that. Price aside, if I had one other gripe about this figure it would actually be the crazy delays that it took to get to me. Despite pre-ordering him from Sideshow the day he went up for sale I was a little pissed to see online retailers getting him in stock weeks before mine even shipped from the source. Considering that there was no Sideshow exclusive for this figure, that Sideshow pre-order actually worked to my detriment, apart from getting some reward points. But not to end this Feature on a down note, I absolutely love the way this figure turned out and he looks damn great on what is now my Winter Soldier shelf, alongside Falcon and Bucky. I passed on the vintage suited Cap in this series, mainly because I’m content to let my “First Avenger” version fill that role. Now I just have to get off my ass and write up the Feature for Rocket and Groot.

Guardians of the Galaxy: Gamora 1:6 Scale Figure by Hot Toys

The second release in Hot Toys’ Guardians of the Galaxy line is here and it is none other than Gamora! Man, do I have a thing for green girls! I’m guessing it started way back when I was an adolescent watching Star Trek. Factor in that GotG is currently one of my favorite movies of all time and it should be no surprise that I was beyond excited to get this lovely lady into my collection. While I’ll admit that the big screen version of Gamora lost a little bit of her hard edge from the comics, I still liked the treatment of the character and Zoe Saldana did a damn fine job bringing her to life. So far Hot Toys’ track record has been pretty good about releasing the Guardians figures on time. Both Star-Lord and Gamora made their original estimated window of release. Rocket and Groot, on the other hand have now been pushed back a month… twice. And what about Drax? Where the hell is he at? The pre-orders still haven’t dropped and I’m getting a little worried that the team may not be complete. Anyway, it’s worth noting that I’ve been sitting on Gamora for quite a few weeks now as I work my way through my backlog of other acquistions, so today’s Feature is long overdue. Let’s look at that packaging…

htgam21

If you like gaudy cheese then these Guardiaans packages will be right up your ally. I do’t hate them, but they do lack the reserved style and gravitas of some of the other recent Hot Toys releases. I’d like to think of it as intentionally designed to match the crass and retro charm of the movies’ anti-heroes, so let’s just go with that. The figure comes in a simple window box with a sleeve over it. There’s an illustration of Gamora on the front looking all sexy and badass, the Guardians logo on the top and a throwback 80’s grid pattern that still reminds me of something you might see on an old PC game box.

htgam22

The boxes are designed to match and have the characters’ name on the side panel set against a starfield. Star-Lord’s box was dark blue and Gamora’s is green. All in all, not bad. Gamora comes on a single tray with her stand and extra bits. You will have to do some careful cutting of plastic wrap on the hands and feet and head, but once you free her she’s all ready to go.

htgam1

htgam2

And what a beauty she is! One of the coolest things about this figure is all the detail that I feel like I’m seeing in her costume for the first time. Yeah, I’ve seen Guardians half a dozen times in the cinema and probably another dozen times on Blu-Ray, but it’s a dark movie and it’s tough to pick out a lot of those details. I’m particularly talking about the metallic blue scribbles running from her shoulders all the way down to her boots. These highlights show up beautifully on the figure and really make the outfit pop. The mesh front also looks great and gives offers more than a hint of cleavage and a peek at her bellly button.

htgam6

htgam4

Gomora’s belt featues various silver painted fixtures and a “holster” to hold her collapsed sword. I know, sheathes and scabbards hold edged weapons, but neither of those terms really apply to this thing, so I’m going with holster. She also has sculpted plastic bands tied around her right thigh and a strap across her left thigh. The boots are a rather distinctive design with cut outs in the heels and some cool texturing on the fronts. The super tight pants can be a little restrictive to hip articulation and the boots don’t offer a lot in the way of ankle articulation. Of course, that’s often par for the course with Hot Toys’ figures. I’d wager that I could get a little more movement out of her legs if I tried, but at the same time I don’t want to risk pulling the stitching.

htgam14 htgam5

The arms are fully enclosed with that rubbery skin we’ve seen before. I only own one other HT release with this on it and that’s their Resident Evil Ada Wong, who actually has it on both her arms and legs. I like it a lot, but it does make me a little more leary about posing the figure. I’ve seen a couple horror stories about the inner mechanisms tearing through Gamora’s arms, and I can just barely make out a bump, probably from the joint, under the skin in her left bicep that might be the problem. The instructions are very specific about what you can and can’t do with them, and I feel like as long as I support the bicep with one hand when articulating with the other, things are going to be OK.

htgam3

And that brings us to the portrait, which is pretty spectacular. It’s a dead ringer for Zoe in the makeup and the detail is all there right down to those thin silver patterns and scars on her cheeks. This is one of those HT portraits that, with the right lighting and a photographer far better than myself, could easily be made to look like the real thing. The rooted hair, which is often a matter of contention for collectors looks pretty good right out of the box. It helps that Gamora’s hair just falls free and is a little wild, so styling isn’t necessary. I do like how it can be swept to one side or the other and it’ll sort of stay there for a wind blown look. The metallic red highlights are also a nice touch.

htgam13

One place that Gamora comes up short is in the accessories. This is a Hot Toys figure, so you know you’re going to get extra hands, and while I’m not someone who gets a lot of use out of a passel of extra mitts it at least adds value to the figure. In this case, however, you only get a total of three pairs, and by HT standards, that’s not a lot. The figure comes with the relaxed hands attached and the tray has a pair of fists and a pair of weapon holding hands. That having been said, the hands do look great and come complete with the sculpted and painted rings on her fingers and painted fingernails. The sculpted wraps around her forearms do a nice job of concealing the wrist joints and enforcing the illusion that the entire figure is covered with “skin.”

htgam11

htgam7

htgam12

She also comes with two versions of her sword, one collapsed and one extended. It looks very nice, but the extended one feels super delicate because by design it’s a very thin blade with a forked tip. Here’s an instance where a little diecast would have probably helped. Considering the cost of the figure, if you’re only going to put a couple accessories in the package, you might as well go all out.

htgam15

htgam17

htgam18

And finally you get her stand, which is the same one that came with Star-Lord only with a new nameplate. I like the bases on these a lot. They’re roomier than the regular Hot Toys stands and feature a graphic to simulate the deck of a spaceship. They’re going to look really sharp when displayed together with the entire team.

htgam20

htgam19

Gamora is a great figure, but she’s also an extremely basic one. Action figures are, afterall beholden to the character designs they are based on, and there isn’t a whole lot to Gamora to make her compex. Mores specifically, she doesn’t have a lot of gear. She has just the one signature weapon, and so while some may find her wanting on the accessories and extras, especially when compared to Star-Lord, the truth is she still feels complete to me. Value, on the other hand, is a different matter entirely. Gamora does slip in at just under $200, a rare thing for Hot Toys these days, but when you consider how light she is on the extras, it doesn’t feel like such a great deal. One might argue that the rubber skin on the arms adds cost, but then my Ada Wong figure has the same on both her arms and legs, came with a crap-ton of weapons and extras, and she shipped at the same price. In the end I’m sure some of it comes down to the likeness and licensing fees, but I’m sure a bigger part of it is Hot Toys knowing they can goose collectors for a high demand item. For me, it was still worth the money to have such a fantastic representation of the character on my shelf, but it’s going to be hard for me to keep collecting HT with any gusto if prices continue to climb. And I’m really starting to feel the pinch in the wallet.

Currently, Rocket and Groot are still on schedule for release next month. After two delays, we’ll see if that finally sticks. In the meantime, I’m going to try to revisit Hot Toys next week with a look at STRIKE Suit Captain America from The Winter Soldier.

Captain America The Winter Soldier: Falcon 1:6 Scale Figure by Hot Toys

While my favorite Marvel Movie to date is still a running tie between Avengers and Guardians of the Galaxy, my second pick is easily the superb political action thriller that was The Winter Soldier so it’s only natural that I’m going to be close to All-In with Hot Toys’ figures from this flick and that brings us to today’s feature: Falcon! Portrayed by Anthony Mackie, Sam Wilson’s treatment in the film was just one of the many things that clicked perfectly for me in this movie. Every time I doubt they’ll be able to bring a certain character to the “realistic” Marvel MovieVerse they still manage to pull it off beautifully. It’s a shame that Hasbro didn’t get us a Marvel Legends version of Falcon. With those huge wings, he would have made an interesting BAF. Nonetheless, Hot Toys has never been one to walk away from a challenge (or a chance to charge fanatics like me $250 for an action figure) and so they honored Falcon with the ultimate action figure treatment. And they certainly did him justice!

htfalc1

I absolutely adored the style used for Winter Soldier’s packaging and Falcon’s is no slouch either. It’s tasteful and exciting and features a great picture of Falcon soaring on the front of the box. Lift off the top and you get an illustrated overlay, which in turn lifts off to reveal the tray containing the figure, the huge flight stand, and all the other bits and bobs we’re used to seeing with Hot Toys’ releases. The back of the box has a cast of all the talented people that worked to bring this figure to our greedy mitts. While the presentation of the packaging will never make or break a figure for me, I prefer this high class route over the somewhat cheesy route they took with the Guardians figures. This feels a lot more like the kind of box a $250 collectible should come in.

htfalc2

 

htfalc3

I love the designs of all the tactical shit that appears in the Marvel films and this figure makes a great showcase for all that great stuff. Falcon comes donning the tactical gear that he wore for the final battles of the film. He has a pair of gray camo pants with all sorts of stitching and pockets, an American Flag and a set of hard plastic knee guards. The pants look great and are just roomy enough to get a wide range of movement out of the figure’s legs without having to worry about tearing the stitching. Up top, Sam is wearing a padded zip down vest with short sleeves, hard plastic shoulder armor, and the somewhat elaborate series of belts and straps that hold on the Falcon jetpack. The fixturing on all the buckles and straps look great and the combination of that and the gold zipper really makes the figure’s otherwise drab military deco pop. As with the loose pants, the lack of sleeves frees up Sam’s arms for a great deal of movement. Indeed, this is one of the most easily poseable Hot Toys figures I’ve had in a while. Yeah, the elbow joints are exposed, which is something Hot Toys likes to avoid to keep from dispelling the realism of these figures, but that doesn’t bother me at all.

htfalc5

 

htfalc14

htfalc15

The portrait provides a great likeness to Mackie. This is an absolutely fantastic head sculpt on every level. And while there’s only one portrait, the addition of the goggles gives you the options of displaying him with the goggles down or worn up on his forehead. They’re loose enough so that getting them on and off in either position is easy. I prefer them on his forehead just because the paintwork on the eyes look so good that it’s a shame to cover them up. In addition to the great head sculpt, Falcon comes with four pairs of hands. You get the regular relaxed hands, fists, a pair for holding his guns, and a pair for holding the grab-bars of his wings. You also get an extra pair of wrist posts in case you break or lose the main set.

htfalc11

htfalc6

htfalc7

htfalc12

Falcon comes with a pair of Steyr SPP submachine guns. In the movie he bypassed the use of traditional holsters in favor of a pretty nifty spring-loaded wrist delivery system that puts the guns right into his hands when he needs them and Hot Toys did a nice job recreating that here. The guns themselves are everything I’ve come to expect from Hot Toys’ amazing arsenal of Sixth-Scale firearms. They’re beautifully painted and feature removable magazines. They also work perfectly with his gun-holding hands.

htfalc8

htfalc9

The Hot Toys version of the wrist holsters doesn’t feature a working mechanism, which is understandable considering that even the film crew had problems getting the real ones to work. Instead, the figure includes two sets of swappable wrist holsters, one with pegs to hold the guns and one without. The guns peg in securely and the plates that they fit on to will slide forward and back so you can still simulate the action.

htfalc4

Of course, Falcon’s trademark feature is his winged jetpack and Hot Toys spared no expense bringing this thing to the life as a Sixth-Scale accessory. Hell, it’s hard to even refer to something this big and cool as an accessory. The backpack clips firmly onto a plate on the figure’s back, which makes it look like it’s held on by the harness. It also includes a light up feature that causes the thrusters to glow yellow. There’s a removable cover on the top of the backpack that reveals the on/off switch. The retracted wings are side pieces that simply pull out to be replaced with the fully extended wing pieces. Swapping the parts out is quite easy.

htfalc16

htfalc17

htfalc21

htfalc20

The wings are absolutely majestic and so beautifully detailed with every segment splendidly defined. Each wing is about the length of the figure itself, so it probably goes without saying that you need a lot of room in that display case if you’re going to display Falcon with the wings fully extended. The wings are, however, hinged in two places so angling them down  gives you some nice options if you’re pressed for space. The wings also include two grab bars that work with one of the sets of hands. You unpeg them from the wings, slip his hands into them and peg them back in.

htfalc23

htfalc22

htfalc18

htfalc24

Finally, Falcon comes with a huge flight stand. It features a hexagonal base that’s dressed up to look like the deck of a SHIELD carrier and has a plate on the front with Falcon’s name and the title of the film. The base includes a heavy duty flexible bar with a spring loaded grab arm that clutches the figure around the waist and supports it in various flight modes. I have to admit that I was skeptical about using this thing at first, but it’s remarkably sturdy and stable and as long as the arm is secured around the figure I don’t foresee any problems with using it indefinitely. It’s remarkably versatile and can be used for all sorts of great poses. As wonderful and value added as this base is, I still would have liked to the standard one that comes with the other Winter Soldier figures. Right now I can afford the space to keep Falcon fully deployed, but I could see a time where I may need to ground him and having a matching stand like the others would have been cool.

htfalc19

htfalc25

Falcon is an absolutely amazing figure, perhaps made all the more impressive by the fact that Hot Toys would pour this much attention into a secondary character. Then again, if they’re prepared to go all out for some of Stark’s armors that were seen for a few seconds in Iron Man 3, there’s no reason that a great character like Sam Wilson shouldn’t get this kind of love. Falcon is also one of the first times in a while that I can honestly say that the price tag on a Hot Toys figure feels like a solid value, at least when grading on the Hot Toys curve. I can almost always justify the money I spend on these things, but here’s one where I don’t even need to try. Considering that most HT figures are starting at the $220 range these days, the added majesty of Falcon’s backpack, plus the robust flight stand makes it easy to see where the money went in this release. That’s two Winter Soldier figures under my belt. Next time I circle back to Hot Toys will be to check out Gamora from Guardians of the Galaxy and after that we’ll look at the ridiculously delayed Captain America in his STRIKE Suit.