Marvel Legends (Red Onslaught Wave): Captain America by Hasbro

I’m finally past the halfway mark in my look at this wave of Marvel Legends figures… only three more to go before I can cobble together a Red Skull! With the wave branded in a Captain America theme, it’s understandable that Cap himself would make an appearance and that’s exactly who I’m checking out today!

capwlf1

There’s really nothing new to say about the packaging, other than Cap and his accessories fill up that tray pretty well. It feels like we’ve been hit with a whole lot of Cap since the Legends line returned, but I’ve been more or less complete with these figures and I was surprised to find only a handful in my Legends drawers, and a couple of those were from the Cinematic Universe. With Rogers being one of my favorite Marvel characters, you won’t hear me complain about getting a fair share of different versions of the man. Oh yeah… see those shoulder straps?

capwlf4

Well forget about them. They literally slid off the figure’s arms the moment I got him out of of the package. I see no way of making them stay on, so I just have to ask, WTF, Hasbro? Costume malfunction aside, I really dig this figure. He’s about as classic a version of comic Cap that we’ve seen in Legends since the line has come back. It’s a very clean look for the costume with no scaling or texturing on the top of the costume at all, just a large white star and pronounced red and white stripes in the mid-section. The classic comic goodness is further enhanced by the very wide belt and large belt buckle, the flared gauntlets and the traditional buccaneer boots. This here is good old-fashioned and unfiltered patriotism, soldier!

capwlf8

The head sculpt is broad and beefy, which makes for a good comic look. The cowl features the extra large “A” as part of the sculpt as well as the protruding wings on the sides. Some of the paint lines could have been a little sharper, but there’s nothing too bad here.

capwlf2

capwlf7

This version of Cap sports more or less the same articulation as most. The arms have rotating hinges in the shoulders and wrists, double hinges in the elbows, and swivels in the biceps. The legs are ball jointed at the hips, with double hinges in the knees and swivel cuts in the thighs and tops of the boots. The ankles are hinged and have lateral rockers. Finally, you get a rotating waist, ab crunch hinge, and ball joint in the neck. I will note that the hinge in the neck does very little and I’ve really only been able to get side to side movement out of the head.

capwlf3

The shield appears to be the same one that came with the Marvel NOW! version of Cap that was part of the Mandroid Wave. It’s the type that clips onto the arm and also offers a peg so it can be worn on the back. The paint on the surface is pretty crisp and clean.

capwlf9

capwlf10

You also get an extra pair of hands, which include a saluting right hand and a pointing left hand. It’s the sort of thing we’ve seen before in Legends scale Caps and while I’m not a big extra hand kind of guy, I do appreciate getting these with my Caps. Almost as much as getting a spare werewolf head.

capwlf12

capwlf13

Because of course, no Captain America figure is complete without an werewolf head. Wait, what? Yeah, this extra head in the package no doubt has had the more casual collectors scratching their heads. Wolf Cap was one of the more bizarre twists Captain America took a while (in the 90’s, I think?) back. I’ve never actually read that run, but it’s very possible I may be displaying this figure with the wolf head because, why the hell not?

capwlf14

I can certainly understand some collectors getting Cap fatigue from Legends. Those people are obviously filthy communists. Me? I’m a patriot, and so I’m happy to get another stand out version of Captain America for my shelf. Indeed, this one fits right in between the version that came in the Target Exclusive 3-Pack (with Radioactive Man and Ms Marvel) and the aforementioned modern look from the Mandroid Wave. The bonus werewolf head is just a gravy. Very silly gravy.

Marvel Legends (Red Onslaught Wave): Mockingbird by Hasbro

Good grief, it’s Monday again and around these parts that means it’s time to look at some Marvel toys. Today I’m continuing my trek through the Red Onslaught/Skull Wave of Marvel Legends figures with Mockingbird. I can’t even begin to articulate my disappointment that TV’s Agents of SHIELD got dibs on Bobbi Morse. It’s not that I don’t think Adrianne Palicki isn’t great for the role, but she isn’t enough incentive for me to endure the rest of the show just for her. I would have rather seen her fleshed out at some point in the actual movies and with a costume a little closer to the comic look we’re about to see here today.

mlmock15

It’s the exact same package we saw last time when I looked at Sharon Carter, the other half of these two “Agents of SHIELD.” The tray is pretty crowded in there thanks to the BAF torso and shoulders being included. Oh yeah, note that I’m just calling these Marvel Legends in my titles and not Infinite Series or whatever they are now. I can’t be bothered to keep up with the name changes and re-brandings, Hasbro. Besides, now you call the 4-inch figures Legends too. Speaking of which, it’s worth noting that Mockingbird got a release in that smaller scale via the West Coast Avengers box set a couple of years ago.

mlmock2

I’m pretty sure this is what Mockingbird is wearing in the comics these days, but I’m pretty far behind in a lot of my Marvel Now trades. I do dig this look a lot. What we lose are the exposed legs and buccaneer boots and what we gain is a more tactical modern look that still pays respects to the classic costume. The boots now have reinforced armor on the shins with sculpted straps and some rather hardcore looking knee pads. Her top still has that button-down tunic look to it and she has a rather bland sculpted belt.

mlmock3

The costume is the typical monochromatic look for Mockingbird, but I like it. The only thing that breaks up the black and white are the silver wrist bracers. The white flanked by black on the top mimics a jacket, which maintains a cool and stylish look and ditches a garment, which would be really impractical for those martial arts fights. The paint lines are reasonably sharp, but man am I getting sick of seeing those production numbers painted on these figures in such an obvious way, in this case right on the inside of Bobbi’s left thigh. Oh yeah, she has a nice bum.

mlmock4

mlmock5

The portrait here is pretty good. I was actually rather surprised that the glasses were removable. That’s not easy to do at this scale and they still look good on the figure. Bobbi’s eyes seem a little far apart, which is the same quibble I had with Agent Carter last week. The sculpted detail in the hair here is a little soft, which is ironic because the hair itself is so damn rigid it renders the neck articulation nearly useless.

mlmock16

mlmock17

Speaking of articulation, while this appears to be an all new body, it feature the usual amount of articulation for most of the Legends female bucks. The arms have rotating hinges in the shoulders, elbows, and wrists. The legs are ball jointed at the hips, double hinged at the knees, have swivel cuts in the thighs and both hinges and lateral rockers in the ankles. There’s a ball joint just under the chest and both a ball joint and hinge in the neck.

mlmock6

mlmock12

mlmock8

mlmock18

Mockingbird includes the fighting staff that splits into two batons, which we’ve seen before with Hellcat and Daredevil. I don’t mind these. They’re kind of fun and they certainly suit the character.

mlmock14

mlmock13

mlmock20

When this wave was first revealed, Mockingbird was one of the figures I was most looking forward to and now that I have her in hand, she doesn’t disappoint. Yes, I do wish the hair was either softer plastic or sculpted in a way that would allow to pose the head. I really did enjoy playing around with her, but the difficult in getting the head to turn even a bit was the one irritant that kept pulling me out of fun. And while I think Sharon Carter was a solid figure, Mockingbird here easily lands as my favorite of this pair of Agents of SHIELD.

Marvel Legends (Red Onslaught Wave): Sharon Carter by Hasbro

It’s yet another Marvel Monday here at FFZ and I am in the midst of running through the Red Onslaught Wave of Marvel Legends. I’ve already featured the Whirlwind and Cottonmouth as the “Forces of Evil” and today I’m going to look at the first of the two ladies that make up the “Agents of SHIELD.” It’s Sharon Carter!

sharcar1

Same deal as last time, the packaging is branded with a Captain America theme that includes a shield on the top flap and his name on the front. As this is one of those “variant slots” and shares it with Mockingbird, Agent Carter’s name doesn’t appear on the front, just the “Agents of SHIELD” moniker. Not to be confused with that TV Show that I just could not get into no matter how hard I tried. Seriously, for all you people who tell me I have a Marvel bias because I can’t stomach the DC Zack Snyder movies, I’m still willing to call the Marvel Cinematic Universe out when it deserves it. Marvel, that show sucks! Just stick with the movies… and the Netflix stuff. What? This has nothing to do with today’s Feature? Well, FINE, I better get back on track, hadn’t I? So, my point is that there isn’t much else new to be said about the package, so let’s jump right on in and look at the figure…

sharcar3

sharcar4

Heeeey, we’ve seen this body before! Yes, as most everyone (including my cat) suspected, Sharon is built off the same female SHIELD agent buck that has been floating around for a couple of years now. And while Hasbro has been doing some little tweaks and kit-bashing on this figure in the past, from the neck down this one is just a straight repaint of Maria Hill from the Agents of SHIELD 3-pack. The biggest change up here is the white suit, which I’ll concede does bring out some elements in the sculpt that weren’t as evident on the darker versions. It’s a good sculpt, with plenty of detail like texturing and piping, but this time around some of the details seem a little softer. Paint mostly consists of the black straps with some silver used on the fixtures, the holstered guns, and the zipper. The SHIELD emblem tampos on her shoulders look particularly nice.

sharcar8

sharcar9

The portrait isn’t bad, but it’s nothing outrageously special either. It looks familiar, almost like some of the Legends female head sculpts are blending together. I think the eyes are set a little far apart, but otherwise there’s not much to complain about here, other than the waxy plastic that doesn’t look like skin. The paint on the facial features is fairly solid and I do dig her sculpted ponytail.

sharcar6

With Sharon being the fourth version of this buck in my collection, the articulation holds no surprises. As a matter of fact… if Hasbro can keep reusing this buck, then two can play at that game. Let me just jump back to an earlier review and cut and paste and here we go… The arms are ball jointed in the shoulders and at the elbows and wrists. Sadly, there are no bicep swivels, but I’m coming to expect that omission in Hasbro’s female figures these days. The ball joints in the elbows make up for that a little. The legs are ball jointed at the hips, double-hinged at the knees, and feature swivels in the thighs. The ankles have both hinges and rockers. There is no waist swivel, but you do get a ball joint in the torso and again for the neck. 

sharcar7

Agent Carter comes with her twin pistols, which really aren’t accessories at all because THEY ARE STILL PERMANENTLY SCULPTED INTO HER HOLSTERS. Gah! Hasbro, why do you keep subjecting us to this outrage? I’m guessing that you knew how many times you were going to recycle this figure, the least you could have done was give her some working holsters.

sharcar10

sharcar11

Instead she comes with this really weird looking gun. I really don’t like this gun. It’s weird. It’s also super soft and comes warped right out of the package. Hasbro has plenty of regular automatic pistols in their Legends scale. I would have preferred one of those.

sharcar14

sharcar13

sharcar12

sharcar15

sharcar16

As critical as I’ve been about her, Sharon Carter really isn’t a bad figure, but she definitely feels phoned in to me. I do find it strange, however, that Hasbro can take one of their standard generic bucks and repaint a different costume on it over and over and few people (myself included) think twice about it, but when they do it with a body as distinctive as this one, it’s obvious and becomes tiresome. Maybe that makes me a hypocrite. With that having been said, it is nice to have Agent Carter join my SHIELD shelf and I’ve got no regrets about buying her. I’m aware that there are collectors out there who are none to fond of this particular buck, but it works fine for me and the recycling here was totally logical and expected. I’m always up for more SHIELD agents, not to mention I needed that leg for Red Skull. Next Monday… Mockingbird!

Marvel Legends (Red Onslaught Wave): Whirlwind by Hasbro

Last time on Marvel Monday, I started in on the Red Skull/Onslaught Wave with a look at Cottonmouth. Today I’m pressing on with the figure that shares that figure’s slot, or at least would be sharing it if they were actually variants and Hasbro was still making running changes in these cases. And thank God they stopped that shit, eh? Anyway, the other half of the “Forces of Evil” is the mutant Whirlwind, and I was pretty happy to see this guy make an appearance in Legends.

mlwhirl1

The box is literally identical to the one we saw last time, with the character name absent from the front. This wave is branded under “Captain America,” complete with a shield emblem on the top flap and blue-filtered images of Whirlwind on the right panel and Cottonmouth on the left. It’s collector friendly, but thankfully I convinced myself not to try saving all my Legends packages because if I did, I’d have an entire wall of my living room covered in them. Wait… Actually, that sounds pretty cool.

mlwhirl2

I’ve always loved Whirlwind’s design. He’s that right mix of screwball goofy, but still realistic enough to take serious. You don’t snicker at a guy in a costume if he’s coming at you with buzz saws. I think he would fit right in guest starring as some kind of crazy Super Saiyan villain in a live action Japanese series or just duking it out with the Power Rangers. The costume is basically a metallic gray body suit with reinforced green armor bands around the torso and those buccaneer boots that comic characters are so keen on wearing. Oh yeah, he also has those spinning saw blades on his wrists! I’ll bet it took all of Hasbro’s collective resolve not to put a spinning torso gimmick into this guy. Oh, you know they wanted to!

mlwhirl3

Damn, Whirlwind’s packing a tight little bottom! Yup! Anyway, the two-tone coloring is very simple, but extremely well done. Yeah, there’s some of that annoying swirly pattern in the gray plastic, but it’s not so bad that it bothers me like it did with the comic version of Ultron from several waves back. It’s just really nice to get a figure with some actual sculpting in the body, rather than just a painted on costume.

mlwhirl4

The head features Whirlwind’s bucket helmet, and while this no doubt required a lot less effort than a full on face sculpt, I’m happy to say Hasbro didn’t cut any corners. The eyes and lips visible through the holes in the helmet are good enough to convince me there’s a fully sculpted head under there, even though I know better. The metallic green finish matches the armor bits on the body and really makes for an attractive finish.

mlwhirl6

mlwhirl8

The saw blades on the wrists are removable, as they simply peg into place. It’s a cool feature and one that I didn’t even notice until one of them popped off as I was playing around with him. It would have been neat if he came with an extra pair.

mlwhirl9

mlwhirl10

The articulation here is quite good. The arms feature rotating hinges in the shoulders and wrists, double hinges in the elbows, and swivels in the biceps. The legs have ball joints at the hips, double hinges at the knees, hinges and lateral rockers in the ankles, and swivel cuts in the thighs. It seems like there are swivels at the tops of the boots, but mine won’t give and I’m afraid I’m going to twist them off. The torso features an ab crunch hinge and a swivel in the waist. Finally, the neck has a ball joint, but because of the helmet, it really only allows for rotational movement of the head.

mlwhirl11

mlwhirl12

No doubt about it, this figure is as solid as they come. He’s loads of fun to play around with and he and Cottonmouth make for a wonderful looking pair of costumed bastards. The paint is fantastic, the coloring is great, the joints are sound, and he has more original sculpting than most of the figures we’re getting in Legends these days. Sure, some may quibble about why are we getting characters like “A” when we still haven’t got a good version of “B,” but I say keep the villains coming, Hasbro. Figures like Whirlwind are exactly the type that I want to populate my shelves so the more the merrier is my motto. Also, I’ve now got both of Red Skull’s meat hooks!

Marvel Legends (Red Onslaught Wave): Cottonmouth by Hasbro

It’s time for Marvel Monday to get back to the Legends line, and boy do I have a lot of catching up to do. I’m actually going to leap clear over the earlier Rhino BAF Wave to look at the Red Onslaught Wave only because I actually have all of these figures, and I’m still hunting some from the previous assortment. Let’s start things rolling with Cottonmouth!

cmouth1

The packaging identifies this as a Captain America themed wave, although some of the characters here make for a tenuous connection at best. Nonetheless, I’ll be the first to complain that the Legends line doesn’t engage in enough team building and I’m hoping that Cottonmouth here (Burchell Clemens, not Cornell) is the first of many members of The Serpent Society to come to the pegs. Billed here as one of the “Forces of Evil,” Cottonmouth shares this slot in the assortment with Whirlwind. Considering there are no longer running changes in these cases, and they each have unique BAF parts, I wonder why Hasbro still pairs up figures like this. Do they save that much by printing a few less packages per wave? In the end it matters not to me, as I’m about to bite right through this package to get at my figure. Actually, I think I’ll just use scissors.

cmouth3

cmouth4

Cottonmouth’s costume is all paint with no original sculpting. In fact, the only thing really distinctive about his suit is the rather abstract snake face on his chest.  From the neck down he’s built straight off of the Tigershark buck right down to the big graspy hands. As a result, he’s a pretty big dude. He positively dwarfs fellow snake fanatic Constrictor and he’s a pretty tall order for any of the previous Captain America’s to take on as well. While I dig the purple and yellow deco, the paint on my figure is pretty sloppy. The edges around the glove of his left hand are rough and there’s yellow paint splatter on his chest. This is also one of those instances where the paint on the leg just below the knee is supposed to match the plastic on the boots, but the darker purple bleeds through.

cmouth5

cmouth6

While Hasbro took the easy way out on the body, they obviously put some extra work into the head. The open mouthed snake hood is textured and the portrait here is pretty fantastic. Hasbro has been pretty good about giving their Legends villains’ faces a little extra personality and Clemens here is no different. I love his expression, the detail in the facial structure and the teeth is excellent and the blank pupil-less eyes make him rather creepy.

cmouth8

cmouth2

cmouth9

Since we’ve seen this body before, the articulation should hold few surprises. The arms have rotating hinges in the shoulders and wrists, swivels in the biceps, and double hinges in the elbows. The legs are ball jointed at the hips, double hinged at the knees, have swivels in the thighs and lower legs, and the ankles have both hinges and lateral rockers. There’s a swivel in the waist, an ab crunch hinge in the torso, and the neck is both ball jointed and hinged. The joints are all solid, no mush here, making Cottonmouth a lot of fun to play around with.

cmouth10

cmouth7

cmouth11

cmouth12

If you’re in this line for the universe building like I am, Cottonmouth should be a welcome addition to your shelf. I’m always up for more villains and while I would have liked a little more effort put into the quality control on the paint, this is still a decent figure in my book. I certainly would have happily picked him up even if he didn’t come with one of those precious Build-A-Figure parts. Now let’s hope that Hasbro keeps the ball rolling and starts delivering on some more Serpent Society figures!

Marvel Legends: “Age of Ultron” Hawkeye (AoU 4-pack, Part 4) by Hasbro

And here we go with the last figure in the Marvel Legends Age of Ultron 4-pack. On a positive note, a Marvel Cinematic Universe Hawkeye in Legends scale was high on my want list. On the downside, I regret going from left to right in my coverage of this set because now I have to finish on a down note. AoU Hawkeye… you got some issues.

aoumlhawk1

Yes, this is a repaint and partial re-sculpt of the Walmart Exclusive figure that came out alongside the first Avengers film. The biggest differences are a new head, a more muted shade of red paint on his tunic, and while the space for it is still there, the SHIELD emblem tampo is no longer present. Finally, the shoulder strap running across the chest of the Avengers figure has been removed. Granted, Hawkeye spend part of Age of Ultron wearing something very similar to his first Avenger’s costume, so the reuse here isn’t unwarranted, but it would have been nice to get him in the brand new costume. As it stands, the texture and detail on the costume is pretty solid, although those ball hips are pretty f’ugly.

aoumlhawk2

With that having been said, right off the bat, something feels off about Clint and I’m going to say it’s the proportions. I can’t quite put my finger on it, because if I put him next to Dr. Banner, they’re almost the same height and their legs and torsos are pretty much even. And yet Hawkeye’s legs look really short and his torso looks really long. It seems to be an optical illusion, but every time I look at the figure I can’t un-see it.

aoumlhawk3

The new portrait features Clint without his glasses. I like that. Including the glasses on the old figure seemed like a lazy way out. The new head features a passable likeness, that would probably be a lot better with some decent paint to bring it out. Unfortunately, my Clint’s peepers are a little wonky. Hawkeye? More like Walleye… amiright?

aouhawk5

Hawkeye comes with two accessories: His bow and quiver and both are the same pieces that came with the WM Exclusive Avengers figure. Unfortunately, that means the quiver isn’t movie accurate, as he wore a rectangular one in AoU and not this drum-style quiver. Yeah, I get it, Hasbro was able to release this set by cutting some costs. I’m still going to mention it, though. The bow is on par with the last Legends Hawkeye figure that I got and I probably would have been a lot happier with it if I hadn’t just opened DC Icons Green Arrow a couple of weeks ago. That figure featured a real string on the bow and removable arrows in the quiver. After playing around with that ensemble of archery accessories, this one just leaves me flat.

aoumlhawk6

aouhawk7

The articulation here looks good on paper, but I do have a few issues with it in practice. Those hips are the terrible rotating hinges that make me work harder to get all the movement out of them. The hinges in the elbows are super mushy and one of the hinges on my figure’s right elbow doesn’t want to sit properly. I have to squeeze the two halves together every time I work the elbow to keep it from wanting to pop out. Otherwise here’s the run down: The arms have rotating hinges in the shoulders and wrists, bicep swivels, and double hinge elbows. The legs have rotating hinges in the hips, swivels in the thighs, double hinge knees, and both hinges and lateral rockers in the ankles. There’s a ball joint in the chest and ball joint and hinge in the neck.

aouhawk6

aouhawk8

aouhawk10

I don’t think this is a terrible figure, but it did turn out to be the weakest one in the box for me. Although, granted the fact that I never got the Walmart Exclusive from the first Avengers film makes him a little more welcome. There’s some good stuff going on here, but the proportions still look off to me and a screen accurate quiver would have been nice. At the end of the day, I’m glad to have him to at least round out my Age of Ultron team. And thanks to Toy Fair we know we’re getting an MCU Scarlet Witch. Still no sign of Quicksilver, though. Next week, I’m going to take a break from Legends and we’ll check out the Hot Toys version of Age of Ultron Hawkeye.

Marvel Legends: “Age of Ultron” Bruce Banner (AoU 4-pack, Part 3) by Hasbro

It’s week three of my look at the Marvel Legends Age of Ultron boxed set and that means we’re moving into the final half. I know my maths! Continuing onward from left to right in the box, we come to Bruce Banner, a very welcome figure indeed as this is the first time we’re getting the character in the Legends scale. That may not sound to exciting to some, but Mark Ruffalo as Banner was one of the many high points of the Avengers films for me. As far as I’m concerned he deserved a Legends figure as much as any of them.

mlbanner1

And yes… it’s a guy in a suit! Banner appears to be built off the same buck Hasbro used for Agent Coulson from the Agents of Shield 3-pack and the recent Chameleon figure. Other than a fresh coat of paint the biggest difference here is the shirt, which is sculpted with an open collar and no necktie. Of course, the shirt does reflect the MCU Banner’s predilection for purple shirts (instead of pants), which is cool because I enjoy that not so subtle comic nod.

mlbanner2

There are just a few blemishes worth mentioning on this guy. Firstly, the coat on my figure is scuffed on the front making it look more like worn leather than cloth. On the back there are some extra glossy patches that look like it was touched by greasy fingers. I swear it wasn’t me! I can’t be sure whether that’s on all figures or I just got luck of the draw. Secondly, I’m not a fan of these feet. They look too long from the front and super weird from the back. They also make it hell to get him to stand. To make matters worse, the peg holes in the heels are so shallow, I don’t even know why they bothered.

mlbanner3

The portrait here is a decent likeness. It maybe leans more toward charicature than realism, but I’m sure I could identify him if someone handed me the figure. If a skilled person were to have at this head with some paint, it could probably be so much more than it is.

mlbanner4

mlbanner8

The articulation here is a lot better than one might expect from a guy who spends his days in a lab doing science. The arms have rotating hinges in the shoulders and wrists. You get double hinges in the elbows and knees. There are swivel cuts in the biceps and thighs. The hips are ball jointed and the ankles have hinges and lateral rockers. There’s a swivel in the waist, an ab crunch hinge in the torso, and both a ball joint and hinge in the neck.
Sadly, Banner doesn’t come with any accessories. Some science stuff would have been cool. Maybe a laptop, a tablet, Loki’s sceptre, or anything. But hey, at least we got the figure.

mlbanner9

mlbanner7

mlbanner6

mlbanner10

If today’s feature seems a little abrupt, it’s because I honestly don’t have a lot to say about Dr. Banner here. Don’t take that to mean I don’t dig him, because I most certainly do. And while I’ve liked all three figures from this set that I’ve looked at so far, Banner and Thor each made buying it worthwhile because they’ve filled some painfully vacant holes on my MCU Legends shelves. And Black Widow was no slouch either. So yes, Banner makes this set so far three for three. With only one figure left, is this set going to go four for four? We’ll find out next Monday and see if Hawkeye hits the mark. That’s archery humor.

Marvel Legends: “Age of Ultron” Black Widow (AoU 4-pack, Part 2) by Hasbro

Last Monday I checked out Thor from the Age of Ultron Marvel Legends 4-pack and today I’m moving on to Black Widow. While Hasbro has been under attack lately for a perceived slight on female action figures, truth be told the Legends line has been producing its fair share of femme fatales. Yes, you can argue that even after being in a slew of MCU movies, this is only the second such release of Natasha in the current Legends line, but then again this is also the first time we’re getting Legends MCU versions of the boys in this box too. What’s my point? I dunno. Let’s look at the figure.,,

aoubwid1

aoubwid2

Widow’s costume didn’t change too much from Avengers 1 to Avengers 2, but the AoU version is still my least favorite. I don’t hate it, but at the same time I’m just not a big fan of the added light effects for her widow’s sting. That all having been said, I was expecting a straight repaint from this figure and was surprised to see that wasn’t the case. Instead, she’s a kitbash between Winter Soldier Widow and the Maria Hill that came in the Agents of Shield 3-pack. As a result, the two Black Widow figures look very similar upon a cursory glance, but under scrutiny, there’s a fair amount of difference. The biggest changes are in that taught little tummy era. The WS version had her Widow emblem sculpted into the middle of the zipper and there was texturing on the suit itself. Here the suit is smooth and the widow emblem is gone and it’s all just zipper.

aoubwid4

The belt is the other easily notable change. Previously, the belt was part of the buck. Now it’s a separate piece, attached to the holsters, and just sort of floats with the articulation. Also, the widow emblem resurfaces here on the belt buckle. Everything else is more or less the same. The flat circles are still on the shoulders where the SHIELD patches were on the previous figure, but now they’re just left blank. Also, the finger-less gloves from the WS version are now full gloves. And yes, the biggest bummer about the figure hasn’t been fixed, her Glocks are still sculpted into the holsters and are not removable. BOO!

aoubwid3

The head sculpts on the two Widows are very close. Keep in mind, WS Widow came with two portraits, one from the first Avengers and one from Winter Soldier, and I’m comparing with the Avengers head because the hair is the same shorter style. And while the two heads are fairly close, the head on the AOU version is still notably better. The eyes are sharper, the contours of the face are a little better, and the lips a little fuller. She also lost the odd spray-on tan that the previous figure had. It’s actually quite a nice likeness for this scale and price point.

aoubwid6

aoubwid11

Articulation here is identical to the previous Widow, but it’s been a while, so let’s run it through. The legs feature ball joint in the hips, double hinges in the knees and ankles with both hinges and rockers. There are swivels in the thighs, but the holsters impede that movement a bit. The arms feature rotating hinges in the shoulders, elbows, and wrists. Yes, the wrists are still pegged in, so if you want to swap the hands out with the previous Natasha… go for it! Lastly, you get ball joints in the torso and the neck. Of course, it helps to have a figure stand handy, as those tiny feet don’t support her that well in action poses. Normally my clear NECA stands work fairly well for Legends, but in this case the pegs were too loose, and I had to dig out some of my Legends hexagon stands.

aoubwid13

aoubwid14

Widow comes with her pair of taser batons. I really don’t like these, either in execution or concept. As accessproes. they’re just crappy little pieces of plastic painted blue at the ends. They’re very bendy and they don’t look like anything. Also, since she comes with gun hands (and remember, no guns!) she can’t even hold them well. It doesn’t matter. The widow sting shouldn’t require batons and these babies are going to the Tote of Forgotten Accessories.

aoubwid5

aoubwid10

aoubwid8

aoubwid15

I was not expecting a lot out of this figure and she actually surprised me. Sure, it’s just a kitbash with some new paint effects, but the figure works surprisingly well and getting an improved head sculpt was a nice treat. And while I’m still not a big fan of the added light effects to the costume, I’ll admit the paint used for them looks rather striking on the figure. I can now retire the Avengers head on my older Widow and pop the Winter Soldier head back on it. So far this set is a solid two for two… next Monday, I’ll move on to Bruce Banner!

Marvel Legends: “Age of Ultron” Thor (AoU 4-Pack, Part 1) by Hasbro

I’m officially between waves of Marvel Legends, so before embarking on another one, I thought I’d spend some time running through this boxed set of four figures that Hasbro released based on the Avengers: Age of Ultron movie. I’m pretty sure this set was an Exclusive, but I’m not sure who had it. I never saw it in the wild, but I spent a lot of time hovering over the BUY-IT button on Amazon at the original price of eighty bucks. Fortunately, I hesitated and in this case it paid off, because shortly after the holdays, I snagged it for half that. Ten bucks a pop for Legends figures that I need to complete my teams? I’ll do that all day long!

aouthor1

The figures come in a nice, long window box with a deco very similar to what we saw with the Agents of Shield 3-pack. The set includes the Age of Ultron versions of Thor, Black Widow, Bruce Banner, and Hawkeye. Considering that we already got single boxed versions of AoU Captain America, Hulk, and Iron Man, this set neatly ties up most of the loose ends by rounding out the core team. Yeah, we’re still missing Scarlet Witch, Vision, and Quicksilver, but I’m pretty sure we can forget about them ever happening. I’m going to cover one figure each Marvel Monday throughout February and I guess we’ll just run left to right, so let’s start with Thor.

aouthor2

Ahhh, it’s damn nice to see this guy’s Cinematic Universe version finally getting a proper Legends release. Previously, the only 6-inch scale movie version of The God of Thunder that I own was the Walmart Exclusive figure based off his original movie and featured here way back in the beginning of 2012. It was a passable figure at the time, but times have changed, and he was also a little too small to really work with the Legends figures. This new version is an improvement on just about every level. Yeah, truth be told, I prefer the design of the armor that Thor wore in his first movie and in The Avengers, but I still dig this look plenty.

aouthor3

Here you get the darker and bare-armed look that was first introduced in his second film and carried over into Age of Ultron. The sculpt of the outfit is beautifully executed here and it’s layered on in some places to give the armor a lot of credibility. Details include the tiny sculpted rivits and panel lines to the cross-thatch pattern of the exposed chainmail on his thighs. The contours of the boots are beautifully done and the silver, pale gold, black, and a little blue make for a striking deco, especially when framed against the vibrant red cape. The plastic cape is textured and looks great. The one thing I do like better about this costume is the prounounced set of discs that secure his cape to his shoulders. On the downside, the cape is rigid and unforgiving and since it’s plugged into his back, you can’t really pull it away from the figure. This means that the cape puts a major dampener on a lot of potentially great action poses.

aouthor4

The portrait is leaps and bounds better than Hasbro’s previous effort. Depending on the angle, I’d say it runs from a passable likeness to a pretty good one. The short beard is particularly well done. The hair looks great, but like the cape, it’s at odds with the articulation. Getting the head to turn side to side works fine, but there’s no upward movement, which nixes a lot of options for decent flying poses.

aouthor9

aouthor13

So, speaking of articulation, Thor’s got plenty of great points. The arms have rotating hinges in the shoulders, swivels in the biceps, double hinges in the elbows, and rotating hinges again in the wrists. The legs are ball jointed at the hips, have swivels in the thighs, double hinges in the knees, and the ankles have hinges and lateral rockers. There’s a ball joint in the torso that offers a beautiful range of motion, and you get the ball joint in the neck, which thanks to the hair, might as well have just been a swivel. It’s a shame that the cape and hair work against what is some pretty decent engineering, but that’s sadly the case here.

aouthor11

aouthor12

Thor features a nice version of Mjolnir, with sculpted wrap on the handle and a lanyard. Hasbro has done quite a few of these in the 6-inch scale and they’ve all been pretty good. This one is no different. He can hold it just fine in either hand.

aouthor10

aouthor5

aouthor6

aouthor7

aouthor8

I’ve got to say, this first figure alone goes a long way to justifying me buying this set. Even if it’s all down hill from here (and from a cursory glance I have no reason to believe it will be), I’ll have something to show for my forty bucks. The hitherto absense of movie Thor in the Legends line made no sense to me. In fact, not having all of the movie characters in Legends makes no sense to me. Hasbro makes 6-inch Marvel figures. Disney makes Marvel movies that rake in tons of cash. Why would you not want to capitalize more on that? Don’t get me wrong, I’m thrilled to see comic inspired characters like Batroc the Leaper and Hellcat on the pegs, but waiting this long to get Thor and still not having a MCU Scarlet Witch, Vision, or Quicksilver? That’s just madness. Ah well, next Monday, we’ll keep this train rolling with a look at Age of Ultron Black Widow!

Marvel Legends (Hulkbuster Wave): Hulkbuster Build-A- Figure by Hasbro

Six figures and a whole lot of Marvel Mondays later and I’m finally ready to build my Hulkbuster. I always find the Build-A-Figures to be a nice slice of pie for desert after a hearty meal of regular Legends figures, but this time it’s different. I don’t think I’ve anticipated a BAF as much as this since way back to Terrax. Maybe Groot. Either way, I’m excited… so let’s see what we’ve got…

hulkb1

Obviously there’s no packaged shot because this guy’s parts were spread out over seven releases, but there he is all laid out and ready for assembly. Most BAFs consist of six parts (four limbs, torso and head), but Hulkbuster is made up of two extra pieces. Instead of one torso you get a pelvis and front and back halves of the torso. Assembly may be a little more complex, but everything still goes together easy peasy.

hulkb2

hulkb3

And what a beast he is! Now this is a BAF! It brings me back to the days of the truly giant DCUC Collect & Connect figures like Stel or STRIPE. The scaling on this guy feels really good, especially when standing next to the Age of Ultron armor, which was worn by Tony while wearing this armor. The proportions are appropriately chunky and he just looks like a powerhouse. A couple of my favorite points of interest include the contours of the lower leg armor, the giant slabs of armor on the forearms, and the curved plates that make up his shoulder armor. There isn’t an over abundance of panel lines, so it doesn’t quite give off that hyper-detailed movie look, but it works just fine for me.

hulkb6

hulkb4

The bulk of the figure is cast in luscious red plastic, which sports a nice sheen, with minimal amounts of those swirly patterns that rear their ugly heads in Hasbro’s plastic sometimes. I hate those. Some of the gold, like the forearm pieces, are bare plastic, while other gold parts are painted. There’s a slight difference between these parts and overall I would have liked a more consistent metallic finish throughout, but then I feel guilty about complaining because so much about this guy is just magnificent. The deco is rounded out by some nice touches of gray.

hulkb5

Articulation is pretty close to what we’re used to seeing in regular Legends figures. Obviously, the chunky sculpt of the armor is at odds with some of the articulation. Let’s face it, the Hulkbuster suit isn’t supposed to be an acrobat, so I’m pretty happy with the level of posability here. If there’s anything that nags at me, it’s the way the pelvis hooks to the upper torso. There’s a ball jointed post to make the connection, but the ball joint doesn’t swivel. The socket grabs it too tight and if you try to do the swivel it just twists the post. With that having been said, he is an amazingly fun figure to play with.

hulkb7

hulkb9

hulkb12

hulkb11

hulkb10

Despite a few really minor and picky little issues, I think this figure is a total home-run. It’s exactly the kind of release that the BAF concept was created for. Take a figure that is too big or too complex for a regular release and get him to the collectors by parting him out. Hasbro has given us some real treats since the Legends line returned back in 2012, but it’s hard to think of too many that impressed me as much as having this beast on my shelf. He was worth the wait, and he’s probably going to spend a long time on my desk getting played around with before he finally migrates to my Legends display shelf.

hulkb13

hulkb14

hulkb15

And that’s finally a wrap for this wave. I’m going to spend the next handful of Marvel Mondays going through the Age of Ultron Avengers boxed set and then we’ll start digging into the Rhino Wave!