YES! DC Fridays are still alive and well, and should be going strong well until next year! Last week, I wrapped up the core figures in this Ares Wave of DC Multiverse Wonder Woman movie figures as well as had a look at the Collect & Connect Ares figure. But the wave doesn’t end there. Toys R Us had two exclusive figures for this wave, each of which came with extra accessories for Ares, making them completely optional for the C&C build, but still worth checking out. I’m going to have a look at both of those today, starting this morning with Diana’s friend, Menalippe.

There’s nothing on the box that states this is a TRU Exclusive, which is pretty weird, because The Giraffe House usually loves to plaster foil stickers on these releases. Nonetheless, you still get photos of the character on the front and side panel, and the only other difference is that where the back used to show only four figures in the wave, here Menalippe has been added as #1. As always, the box is collector friendly, but I’m about to tear the crap out of it to get at my goodies.

So, I can’t say as I actually remember Menalippe in the movie, but I’ve still only seen it once and I was pretty well sauced. I hope to remedy that sooner or later. But despite being a specific character, I think this figure could probably work just as well as a generic Amazon army builder. She features a very handsome suit of maroon, black, and bronze armor with some cut lines running in a “V” pattern on the torso and some additional pitting sculpted in. Her arms feature shoulder pads and wrist bracers. The ensemble isn’t as flashy as what we saw on Queen Hippolyta or Wonder Woman, but it makes for a great rank-and-file soldier.

The bronze belt looks like it’s supposed to be an eagle motif, with the wings reaching out and back around her hips. Below the belt Menalippe has a soft plastic brown skirt, which is sculpted to resemble strips of leather. Under that she has sculpted high boots with grieves and knee armor. My only real gripe here is that the color of her flesh tones doesn’t match too well between her upper biceps and lower arms. The upper biceps are painted, but the bottom arms are bare plastic.

The head sculpt is good and I can see a little bit of the actress likeness in there, but then again, she’s got her helmet on, so some of the features are concealed behind the sculpted cheek guards. There’s a lot of detail in the hairstyle, and the paint on the face is basic, but all around solid. The seams running up the sides of her neck are a little f’ugly, though.

The articulation here is identical to what we saw with the previous female figures. The arms have rotating hinges in the shoulders, bicep swivels, hinges in the elbows, and swivels in the wrists. The legs have rotating hinges at the hips, hinges in the knees and ankles, and swivels in the thighs. She also has a swivel in the waist and a ball joint in the neck. The skirt is designed so that it doesn’t hinder her leg articulation too badly at all.

Menalippe comes with three accessories: A bow, an arrow, and a spear. The bow is brown with a gold grip and additional gold fixtures. There’s no string, and it doesn’t look like one could be easily attached, so you just have to use your imagination. The arrow is also brown and gold. Mattel designed the figure to have a socket in the right hand to plug the arrow into. The downside, it renders that hand useless for anything else, but it does mean you can actually get her to hold the arrow well and even pose as if she’s knocked it and is ready to shoot. A swap-out hand would have been nice, especially since it’s a common thing to see in Hasbro’s 6-inch Marvel line, but let’s face it, DC Multiverse isn’t working at that level yet.

The spear is a completely different sculpt than the one we saw with Hippolyta. This one has a plain elongated gold point, and looks more like the weapon of a soldier. I dig that. Her left hand is clearly sculpted with the intent to hold the bow first and the spear second, as a result the spear can be a little loose in her grip. Before wrapping up, let’s see what this box has for Ares.

HOLY SHIT! The Ares accessories are a pair of flaming swords and these are some bitchin’ looking weapons. If this guy didn’t already look like he belonged on the front of a Metal album cover, he sure as hell does now. The underlying sculpts are meant to resemble the sword he came with, so I guess he just ignites that bitch and splits it into two swords.

These are each cast in an orange-yellow translucent plastic and there’s some paint spray to bring out the swords which are supposed to be at the heart of the flames. The effect isn’t bad, and I’ve got to appreciate how much plastic went into crafting what are essentially a couple of bonus accessories for a Collect & Connect figure. Indeed, considering I didn’t pay a lot more than ten bucks for Menalippe, these swords were almost worth the price of admission alone. And Ares doesn’t know it yet, but he may be lending these puppies out to some of my Mythic Legions figures.

I think Mattel made some solid character choices for this wave, beyond the obvious ones, and I’m really happy that they leaned heavy on the Themyscira stuff, because that was my favorite part of the whole movie. The fact that I hunted down Menalippe just goes to show how happy I’ve been with this wave, and she displays quite nicely with the other Themyscira-based figures. Later on tonight, I’ll come back and check out the last figure in the line… Wonder Woman!

I was originally going to save the second half of my DC Friday content for later in the day, but I decided to just unload it all at once this morning before heading off to work. So, if you happen to be checking in today, don’t forget to scroll down and read the review for the Wonder Woman figure as well. This way I’ll be freed up to come back later tonight and have a look at the Collect & Connect Ares figure as well! But for now… let’s check out Steve Trevor.

There’s nothing new to say about the packaging, so let me just go on record by saying, I like Chris Pine a lot. He’s a damn charismatic fellow and based on some of the behind-the-scenes stuff I’ve seen, he seems like he’s fun to work with. I’d even dare say that some of the interviews I’ve seen with Gal Gadot and Pine promoting Wonder Woman have shown more chemistry between the two than between their characters on screen. But maybe that’s just me. With that having been said, Pine didn’t always work for me as Steve Trevor. Maybe it was the way he was written, but I just didn’t see it. Nonetheless, he wasn’t necessarily bad in the role and I was happy that Mattel gave him a figure.

And it’s a damn nice looking figure as well! Steve features his WWI-era garb, which consists of boots, sculpted wraps for his lower legs (socks?), some baggy trousers, a belted tunic-like vest, and a heavy knit shirt with a turtleneck. It’s a strange attire, and that’s coming from someone who has made reading the history of the period a hobby for a while now. I’m not saying it isn’t authentic, but it’s far more of a swashbuckling adventure garb than a straight on uniform. Then again, in the DCEU Trevor is an American Pilot who attaches himself to a British Army Unit as an Intelligence Agent, so it makes sense that he wore whatever was on hand and suitable. In any event, the sculpting here features some decent texturing on the wool socks and the the vest, as well as the knitted pattern on the shirt. I think the vest is supposed to be leather, which is why they went with a glossy paint for it, but I think it would have looked better in matte. Still, the recreation of the underlying costume is not bad at all!

Steve also wears a coat over his duds, one which I would say is like a cross between an aviator’s jacket and a trench coat. Yes… after all the figures I have wearing trench coats, I finally have one wearing an actual TRENCH coat. How exciting! The coat consists of the usual soft plastic vest with arms sculpted to look like sleeves. The arm holes are a little bigger than they needed to be, which sort of dispels the illusion that it’s all supposed to be one garment, but it still works pretty well. The jacket features sculpted stitching and buttons, wide lapels, a sculpted fur collar, and even the buttons on the sleeves are sculpted and painted gold. Again, nice attention to detail!

The head sculpts in this assortment haven’t been the best, but Mattel sure hit all the right notes when they did this one. It’s an excellent likeness to Pine, and I’m guessing that’s not an easy thing to do, because Playmates sure as hell couldn’t make it work when they were releasing the Kirk figures from the 2009 Star Trek film, and they sure tried in every major scale. The paint here is a little basic, especially the wash on the hair, but I’m confident that I could recognize who this was supposed to be, even if the figure was taken completely out of context. It’s not quite up to snuff with some of Hasbro’s best MCU portraits, but it’s still good work.

Despite being the first male character in the assortment, Steve features close to the same articulation we saw with the ladies, but in an ironic twist, there’s actually a few points less here. His arms have rotating hinges in the shoulders and elbows, and swivels in the wrists, but not in the biceps. The legs have rotating hinges in the hips, swivels in the thighs, and hinges in both the knees and ankles. After years of complaining that Hasbro omits the bicep swivels from their Marvel Legends ladies, it’s kind of funny to see this mostly female assortment from Mattel go the other way around. He does make up for it, however, by adding a ball joint at the chest, in addition to the swivel waist and ball jointed neck.

Trevor comes with one accessory and that’s a shotgun. It’s a fairly bland sculpt and the trigger and guard are both one piece of solid plastic, but at least the forestock is ribbed. The weapon has a blued finish with brown paint for the stock. I was able to get some decent poses of him holding it, but since the trigger guard is a solid piece, and he doesn’t have a trigger finger, you can’t really have him firing it.

All in all I think Mattel did a really nice job on this figure. Yes, he’s relatively simple and the colors are bland, but both fit the source material pretty well, there’s some nice attention to detail on the costume, and the likeness is exceptionally well done for a DC Multiverse figure. He also looks great next to Wonder Woman, and that’s really what counts. Not to mention, he comes with the final pieces I need to cobble together my Collect & Connect Ares figure. So, come on back tonight and I’ll wrap up an ultra-rare DC Friday Triple-Play by checking out Ares.

Welcome to another Double Feature for DC Friday! And after some spotty weeks without new DC content, it feels good to be doing these again! Last week, I knocked out the first half of the DC Multiverse Ares Wave with a look at Diana and Hippolyta. Today I’m going to finish up the four figures needed to build the C&C figure by opening up both Wonder Woman and Steve Trevor!

And here’s Wonder Woman in the box, and I’ll go ahead and point out the obvious by saying this is Diana wearing her black cloak over her costume. It’s a look that she adopted for some very specific sequences in the film and it’s probably not the iconic look that most fans and collectors are looking for. There is a more traditional version (sans coat), but oddly enough that one is a Toys R Us Exclusive and is not necessary to build Ares, but does come with some optional extras. And yes, I will be looking at that figure, as well the other TRU Exclusive of the wave, Menalippe, next week. For now, let’s get Diana out of her box and check her out.

While I don’t own the Multiverse Batman V Superman Wonder Woman, this one looks like this is a re-sculpt of that previous release. She’s been fitted with a soft plastic sleeveless coat, and her arms have been sculpted with sleeves on them to resemble part of the jacket. It looks good, I like the sculpted fur fringe, although it does cover up a lot of the beautiful work they did on her rather iconic outfit underneath. And damn, it is a beautiful outfit, with plenty of detail, and some snappy red, blue and gold paint. I’ll actually save some of that gushing for when I review the TRU Exclusive version.

Diana also sports the shoulder strap, which is sculpted from a separate piece of soft brown plastic and features a loop for her sword and her lasso. The lasso loop works well and pegs into place securely, although the sword loop pits the sword against the cloak, making it a difficult fit. And while I appreciate the ability to store her equipment, I do wish this rig was removable. Alas, it’s permanently attached to the back of the figure. Some deft work with a razor could probably get it off of there, but I think I’ll keep it.

The head sculpt is also unique to this figure, as it features an integrated and non-removable hood. It looks good and allows her to still have working neck articulation, while still convincing me that it’s supposed to be part of the cloak. The overall portrait is OK, but it’s certainly not a great likeness for Gal Gadot. I can see a little of her in there, but it’s fleeting. Also, they seem to have missed the white paint on my figure’s right eye. I’d argue that such lofty goals as good likenesses are too much to expect from a 6-inch mass market line these days, but then I look at some of Hasbro’s MCU figures in Marvel Legends and realize that solid likenesses can be done at this scale and price point. You just have to work harder at it, Mattel.

As for articulation, this wave has been really consistent with the different points, meaning that it’s all the same points we saw last time with Diana and Hippolyta. The arms feature rotating hinges in the shoulders and elbows, with swivels in the wrists. The legs have rotating hinges in the hips, swivels in the thighs, and hinges in both the knees and ankles. There’s a swivel in the waist and a ball joint in the neck. On the downside, the sculpted jacket sleeves restrict the range of motion in those shoulders just a bit. I was sort of able to get the Diana figure to cross her bracers, but that ain’t happening here.

As already mentioned, Wonder Woman comes with her sword, The Godkiller, and her Lasso of Truth. The lasso is more or less the same accessory we got with Diana. The sword is similar a similar sculpt to the one bundled with Diana, but features several notable distinctions, including the pommel crossguard and blade. She can hold either accessory in either hand.

And so this wave continues to give me hope for the DC Multiverse line, where previously I had none. As I’m sure I said before, there’s still room for improvement, but compared to some of the garbage this line has churned out in past waves, figures like this one are definitely steps in the right direction. Mattel obviously invested some effort into the sculpt and paintwork, and if you want a figure of Diana that is very specific to her first solo movie, than this cloaked version definitely fits that bill. Coming up next… Steve Trevor!

As promised, I’m back to dish out an extra helping of content on this beautiful Post-Thanksgiving, DC Friday evening. It’ll help make up for taking yesterday off, and also start to balance the scales against all those damn Marvel Monday Double Features. I so desperately want to give DC Comics action figures some love, they just have to give me something to work with. So… continuing on through the DC Multiverse Ares Wave, let’s check out The Queen of the Amazons, Hippolyta!

This is one of those figures that I may not have bothered with if I weren’t hunting all the C&C parts in the wave. Shhh… don’t tell Hasbro and Mattel, but this strategy to get me to buy an entire wave usually works. The package is identical to what we saw earlier today, only with photos of Hippolyta on the front and side panel. It’s also branded for the Wonder Woman film at the top J-hook flap. Everything is collector friendly, and these look pretty good lined up on the shelf with the character photos showing.

But forget about pretty good, because this figure turned out surprisingly great. I mean, just look at this lady! For a figure of a relatively minor character, Mattel invested a crazy amount of work into this one. And nowhere is that more evident than in her beautiful armor. The sculpted layers, the tiny etchings, the eagle motif on her chest, I’m quite beside myself. This is so far removed from what I’m used to seeing in the Multiverse line. Even the skirt has a lovely snakeskin like texturing to it. The gold and copper deco looks luxurious and the whole ensemble gives off this wonderful Art Deco vibe.

Hippolyta also sports sculpted armor pieces up near her shoulders, and bracers with sculpted straps. Over her armor, she dons a sleeveless cloak on  with a sculpted fur lined collar. It looks great, but it’s also easy to take off if you want to give her a little more range of motion.

The facial features on the head sculpt are a bit soft, but certainly not bad. At the right angle I can see a little resemblance to the actress in there, but not a whole lot. The sculpting on display in the crown, however, is superb, as is the detail in her hair.

Hippolyta’s articulation is identical to the Diana figure I looked at this morning, so I’ll just refer you back to that review. The cloak obviously inhibits things a bit, particularly with the legs, but if you take it off, it frees her up a lot, thanks to some strategic slits in the skirt.

Queen Hippolyta comes with two weapons: A spear and a sword. The spear is measures a bit longer than the figure itself and features a smooth brown shaft and some nice sculpted detail on the golden tip. She can hold it in one or both hands.

The sword features a rather ornate gold hilt with swirling patterns making up the guard. The stout blade is painted silver and has two fullers running down the center. The grip is extended, so she can wield it in one or both hands, and her articulation allows either option.

Hippolyta was certainly a pleasant surprise. Diana was a solid figure, but I think this one raises the bar quite a bit. I don’t know if it’s because they’re DCEU based figures or if Mattel has been upping their game with this line in general, but I’m happy to have picked up this figure, not to mention finally dug it out and opened it.  Next Friday, I’ll open up Wonder Woman and Steve Trevor and maybe just throw together the Ares Collect & Connect figure too!

Well, I saw Justice League last week, and to my surprise I actually loved it. Yes, I appear to be in the minority, and I’ll grant you that my emotions were probably grading it on a curve, but I don’t care. This was the first time I came out of a DCEU film happy and it felt great. So great, that I bought up all the Multiverse movie figures. Then I realized I needed to get caught up reviewing some of the ones that I had kicking around and unopened, so I made myself a deal. I’d finally go through the figures from the Wonder Woman movie, before I allowed myself to open up any from Justice League. I can be a real strict asshole sometimes, but fair enough. And since it’s been a little while since I’ve had a proper DC Friday, let’s double up and check out a couple of them today, starting with Diana of Themyscira!

Here’s the DC Multiverse packaging and it’s pretty much the same as we saw when I last attempted to review a wave of these. Remember that? I got through a little more then half of the Doomsday Wave before I gave up in disgust because the figures were so awful. Oh, I’m going to finish that wave some day… I promise! As for Wonder Woman… I came away from seeing it the first time liking it, but not loving it. Or to be more precise, I loved the first half and really didn’t like the second half. Nonetheless, I picked up all the DC Multiverse figures back then and it’s going to feel good to finally open them with a renewed confidence in the direction of the DCEU. The package features some lovely photos of Gal Gadot in costume on the front and side panel, and the back shows the rest of the figures in the wave. Surprisingly there are only four figures needed to collect in order to build Ares, although there are two additional figures not pictured, which I think were exclusives. I’ll check them out in a couple of weeks, after I’ve finished with these.

So, this figure depicts Diana donning her native garb, and overall I think it’s a pretty good effort. The dress has a subtle texture and features a metallic copper color up top and a tan skirt, which gradually gets darker toward the bottom. There’s also some darker copper paint on the straps to give the outfit a little added pop. The bracers feature panel lines and sculpted straps holding them in place. They’re neatly painted silver with gold borders on the edges, and she has sculpted brown wraps around her hands. The knee-high sandals are also sculpted and painted, although my figure has a little splotch of brown paint on her right toe.

The skirt is cast in a separate piece of soft plastic and attached at the waist. It’s rather thick, and it isn’t all that flattering from some angles, like there’s a little too much gear in her saddlebags, if ya know what I mean. Again, not bad, but maybe could have been executed a little better and with thinner plastic. There’s a part in the front of the skirt by her right knee, which helps a little with articulation, but I went ahead and razored it all the way to the top to make it a little less restrictive.

The head sculpt isn’t great, especially when you get in close with a camera, but in hand it doesn’t look terrible either. Alas, it also doesn’t look much like Gal Gadot. I do, however, really like the detail in her hair and the way the ponytail is executed. On the downside, they could have done a better job matching the flesh tone between her torso, which is a shade darker, and her head and arms, which are a shade lighter.

The articulation here is actually much better than what I’ve seen in my past run ins with the DC Multiverse. The arms feature rotating hinges in the shoulders, hinges in the elbows, and swivels in the biceps and wrists. Oh look, Hasbro! 6-inch female figures can have bicep swivels! Her legs have rotating hinges in the hips, swivels in the thighs, and hinges in both the knees and ankles. There’s a swivel in the waist, no articulation in the torso, and a ball joint in the neck. Again, the biggest issue here is that thick skirt, which really hinders the hip articulation, unless you’re willing to do a little modification.

Diana comes with two accessories, the first of which is her sword. I thought it was supposed to be The Godkiller, but the pommel design doesn’t match what we saw on screen, so I think it’s just a regular sword. The sword is a cool little sculpt, with a gold hilt and a silver painted blade. There are sculpted symbols running down the center of each side of the blade, presumably meant to be Greek lettering. Mine came out of the package rather warped, but I was able to get it to straighten out fairly well. Sadly, there’s no loop on her hip or back to store the sword, but then I’m not sure if I remember her wearing it while she was on the island.

The other accessory is her Lasso of Truth. It’s sculpted in a coil and cast in very soft gold plastic. Like the sword, there’s nowhere on the figure to attach this, so she just has to hold both.

Overall, I find myself liking this figure quite a bit, even though there’s certainly room for improvement. Granted, much like the Justice League movie, I set my expectations pretty low here, based on my past experiences with DC Multiverse, so I’m probably being a lot more forgiving than I should be. The head sculpt and paint are a long way from what Hasbro is doing with their MCU figures in Marvel Legends, although I’d say the rest of the figure holds its own pretty well. My original plan was to look at Queen Hippolyta now too, but I went a little long discussing Diana, so I’ll come back later tonight to check her out.