Marvel Legends (Void Wave): Crystar by Hasbro

Y’all remember Crystar? Goodness and Light! Evil and Might! …the winner is up to you! Well, nobody really won, because the comic book only lasted 11 issues and the toyline by Remco fizzled out pretty quickly. Not even a cartoon! I never owned any of the figures, but damn that commercial made me want them and I did have a couple issues of the comic, picked out of 25-cent milk crates at the used bookstore downtown. For a failed toy franchise, it sure left a big impression on me. If someone told me that we were getting a modern Crystar figure, I would assume it would be through a company like Nacelle or Zica, but nope… it’s Hasbro accessing the license through their Marvel Legends line. And I wouldn’t get too excited, because this is almost guaranteed to be a one-off, like that Matt Tracker Hasbro released through the GI JOE 25th Anniversary line.

Even stranger, Crystar was not released as a single store exclusive, but rather as part of a regular wave created around The Void Build-A-Figure. To the uninitiated, Crystar is a Prince of Crystalium and fights against the chaotic forces of Moltar and his Magma Men. It’s a classic good vs evil toy premise, but with some pretty hardcore stuff like people shooting out each other’s eyes and the body horror of Crystar himself having to be rended from death by merging his body with The Great Prisma-Crystal. It was an imaginative line and the toys looked great, so getting a modern updated Crystar figure like this definitely scratches a very old itch.

And wow, did Hasbro go full-on crystal with this guy! The bulk of the body is cast in a gorgeous translucent blue plastic with crystal-like facets sculpted all over the place. The gauntlets, boots, and undies are all cast in red plastic and he has a blue crystal embedded right where his belt buckle would be. This is an absolutely beautiful update to the vintage Remco figure! And while the original Crystar had to get by with just old school 5 POA, plus hinged knees, Hasbro’s new release conforms to the Marvel Legends standard. And since the body is entirely new, they went with pinless joints. You also get two sets of hands, which include one pair of accessory holding hands, a right fist and a left hand with splayed fingers.

The portrait also falls pretty closely in line with the original figure. The head and helmet are both sculpted in more of that sumptuous crystal blue plastic while the front crest and the side wings are cast in the same red plastic used for his boots and gauntlets. The original figure had a red connecting band between the crest and wings making it more like a complete crown (it was also removable), so I’m not sure if that was an oversight or an intentional stylistic change here. It might be fun to get an extra figure to make that simple change with some red paint. It looks like there’s some added face printing in there, but it’s kind of hard to tell as it gets lost in all that blue crystal.

The vintage Remco figure came with three accessories: A sword, shield, and prism looking-glass. These looking-glasses were color coded and included with each of the original figures. Hasbro nixed the prism, which is honestly totally expected, but he does get his trusty sword and shield. The sword is cast in transparent blue plastic and hits all the beats of the original sword design while smoothing out the proportions and giving it a bit more detail. The hilt has a ribbed grip, the crossguard hooks toward the blade at the ends, and there’s a diamond-like swell near the base of the blade.

The shield is also cast in translucent blue plastic and is a nice homage to the original figure’s shield. There’s a octagonal central boss with arrow like designs connecting the corners of the hexagon with the outer ring of the shield. The inside of the shield has a grab bar which works well with the figure’s grippy hands. I love how immaculate and clear this shield is, as it offers very little distortion when looking through it.

Crystar is a really cool figure and a beautiful update to the original Remco release. The only downside for this guy is that now I obviously want more, and I think it’s a safe bet this will be a one-time deal. I don’t know what the appeal of this fellow will be at retail, as both the comic and action figure line lean toward the obscure these days. I doubt there’s a whole lot of love for the original comic series, and the character only appeared in a handful of other Marvel books. I’m actually still pretty surprised that Hasbro included him as part of a Build-A-Figure wave rather than just a one-off store exclusive. But even if you are buying him just to get that Void BAF piece, I think he’s a fantastic figure and definitely worth a place on that ecclectic corner of the Marvel Legends shelves that all of us collectors probably have. ironically, the only two figures that I pre-ordered in this wave was Crystar and Power Princess, although I’ll agree that this wave is pretty damn strong, and I may wind up grabbing some more if they turn up on sale here and there.

ReAction Figures: Universal Monsters, Series 1 by Funko

Early last month I checked out Series 2 of Funko’s Universal Monsters ReAction figures and was mighty impressed. I also waxed nostalgic about the original 1970’s REMCO figures that were also based off these movies and how this was one of those instances where Funko hit the whole nostalgia and retro concept right square in the bulls-eye. The Series 2 figures had great sculpts, awesome cards, and unlike a lot of their ReAction lines, they worked brilliantly at what they set out to do. I started with Series 2 because all of those characters were also released as part of REMCO’s original line, whereas only two of the four monsters in this first series were included in that vintage line: Gillman and Frankenstein’s monster. I like that they took the opportunity to expand and the additional characters, The Invisible Man and The Bride of Frankenstein, are pretty good choices, I think.

raum1a
Once again, the cards for these figures are excellent. Funko took B&W stills direct from the movies. I even like these designs better than the original REMCO cards. Maybe that’s blasphemy, but I think these do a better job of capturing the flavor of the individual films. James Whale directed three out of the four of these films and I think his talents are best displayed by the magnificent lighting in the shot of Elsa Lanchester as The Bride. I also think it’s rather clever that they used that profile shot of her while the figure also had to have its head turned in the package because of the tall hair sculpt. The shot used for Frankenstein’s monster is perhaps not quite so stunning, but still a fantastic image for the card and oozes atmosphere.

raum2b

Moving on to the second pair of cards, The Invisible Man was always among my least favorite of these films. I never really considered Dr. Jack Griffin to be a proper Universal Monster, but the film still works for the genre, especially since Whale directed it along with so many of the others, and I still welcome the addition of the figure into this fold. And that brings us to the wonderful Creature From The Black Lagoon. It’s one of my favorites of this entire genre and I think both the movie and the Gillman costume both hold up remarkably well to this day, especially the underwater shots. As good as Series 2 was, and as many great characters as they packed into these two waves, Gillman was the one that had me most excited. Especially since I absolutely loved that old REMCO figure. Time to open these figures up, but fear not, I’ll be using a razor and a degree of care so I can save the cards. Let’s start with The Monster and his Bride!

raum2f

raum2g

raum2h

Frankenstein’s monster is a really nice sculpt and packed with some cool detail for a retro-style figure. The bolts in his neck are there, albeit they are a little hard to see. He does have a little paint applied to the scar at the top of his hairline. There are stitching marks around his wrists and his shoes even feature little lifts. You get the usual little sculpted wrinkles in his jacket and trousers. Is it a great likeness to Karloff in the makeup? Nah, not really. Karloff isn’t even credited anywhere on the card, but it’s an iconic enough look that it works fine for the figure. My one complaint would be that his clothes are way too clean and tidy. Some sculpted tears and weathering would have gone a long way. Still, this guy is a solid figure!

raum2c

raum2d

raum2e

The Monster’s Bride is also a really nice effort and a treat, since she never got a slot in REMCO’s line. I guess the female figures got slighted back then too. There’s very little detail on her torso and the lower half of her gown. Technically, she doesn’t even have feet, just a split down the middle of the skirt, similar to what Kenner did with their robed figures like Obi-Wan or Anakin Skywalker. Her arms, however, do have some great sculpted bandages and their yellowed color helps to break up all the white from the rest of her outfit. The head sculpt on this figure is really good for a vintage-style head, but the likeness isn’t really there, despite the fact that they credited the actress’ likeness on the back of the card. Lanchester had far more pronounced eyes. That having been said, the hair sculpt is fantastic and for a more generic version of the character, I think the head works brilliantly.

raumj

raumh

raumk

Moving on to The Invisible Man, this was obviously a figure where likeness wasn’t an issue because Dr. Griffin’s head is all bandaged up. That having been said, the attention to detail in the bandages is excellent. If you look closely, the pattern of the wrappings even mimic how they looked on actor Claude Rains. The rest of the figure consists of a sculpted smoking jacket, which looks good, but doesn’t really attempt to recreate the complex checkered pattern on the one worn in the film. Going in, I wasn’t sure I was going to like this figure all that much, but I think Funko did a pretty solid job on him.

rauml

raumm

raumn
Last up is Gillman and I gotta say, Funko did an amazing job with the sculpt on this guy. The texturing, the fins, the segmented plates of his chest are all lovingly recreated as is the frightening head of the fish-man itself. There are sculpted wrinkles at the ankles that look like they were going for a figure based on the actor in the suit, rather than the real creature. Intentional or not, it’s kind of meta and I dig that a lot. With the sculpt being so good on this figure, I kind of hate to knock it, but I think the paint could have been better. There’s are very few paint apps to speak of at all and here’s a case where I think the coloring on the REMCO figure worked better for me. But don’t worry, Gillman, you’re still a great figure.

raumo

raump

As with Series 2, these figures retail for around $10 each, but I was able to do a little better on some. They’re readily available at all sorts of e-tailers and there are even some variants out there if that sort of thing is your bag. I once likened the ReAction line as potentially being the Atari 2600 E.T. cartridge of the action figure world and Funko does indeed seem to be unleashing a torrent of these figures that very well may one day be filling a landfill out west somewhere. Obviously, I’m not here to say that all their efforts are without merit. Indeed, you’ll be seeing ReAction figures featured again here on FFZ and probably sooner than later. For now, all I’ll say is that if nothing else great comes out of the somewhat obnoxious flood of Funko ReAction figures, I’ll still consider these Universal Monsters figures as well worth the effort. These don’t feel like they were “phoned in” to turn a quick buck. Everything from the card art to the character selection to the figures themselves feel like a love letter to the old REMCO line and all the terrible Marty McFly and Pulp Fiction figures can’t wash that away.

ReAction Figures: Universal Monsters, Series 2 by Funko

I’ve certainly given my share of grief to Funko’s ReAction line of action figures and that’s despite only having featured one of them here on FFZ. I’m not against the concept. Hell, my unending praise of Warpo’s Legends of Cthulhu line alone should prove that. But Funko’s scatter shot approach to the whole retro-vintage thing makes it seem more like a shameless cash grab than actually doing something interesting with the concept. This entire faux-vintage idea grew out of Super-7 bringing the un-produced Kenner Alien figures to market based on original prototypes. It was a pretty big success for something as niche as it was and so ReAction was born giving us “what if” imaginings of lines that were never produced. I think it’s a noble gesture where actual 70’s and 80’s properties are concerned, but when you extend it to stuff like Firefly or Buffy the Vampire Slayer, everything starts to break down. Of course, by casting a wide, wide, WIDE net over all sorts of properties it means that they do have a chance to get it right sometimes and today we’re looking at one of those instances with Series 2 of their Universal Monsters. (I know, “what happened to Series 1?” I’ll get to it eventually.) Keep in mind, these figures aren’t a case of paying tribute to what could have been, but rather what was, as the company REMCO* put out a line of six 3 3/4” Universal Monsters figures back in 1979 and I have a lot of fond memories of those figures and the playsets.

unimon1

Series 2 consists of Dracula, The Mummy, The Phantom of the Opera and The Wolfman. While Series 1 actually contains my favorite monster, The Gillman, I went with this Series first because I thought it was a little better fleshed out and all of the figures were ones featured in the vintage REMCO line. I like the fact that the cards are all original and the front of each one is branded solely based on the character’s movie. You actually have to turn the card over to see anything tying it in with a larger series. The figures each come just rattling around in their coffin-style bubbles, just like the good old days, although my Dracula came with the bubble completely detached from the card. That sort of thing would have really pissed me off if I was keeping them carded, but who am I kidding? There was never any chance of that!

unimon2

unimon3

It would be impossible to pick my favorite card in this set as they all feature great B&W shots from the original films. I will say that I get a chuckle out of The Phantom’s every time I look at it. It looks like Lon Chaney is looking down in horror at his little action figure! Everyone’s a critic! As good as these cards are, I really wasn’t sad about opening them up. It’s probably because the appeal here is the figures themselves as replacements for my beloved REMCO monsters. Let’s start out with Dracula and The Phantom of the Opera.

unimon6

unimon5

These guys look splendid, although as might be expected there’s some parts sharing and resculpting here. You wouldn’t think that would be a factor in cheap ten dollar figures, but it’s done well so I don’t have any issues with it. These are, afterall, a couple of dudes in black suits and capes so the arms and legs are shared. The torso’s appear to be remolds as there are obvious differences, like Dracula’s very nicely sculpted and painted medallion and The Phantom’s tie. They both have waistcoats, but Dracula’s hangs down over his pants, whereas Phantom’s does not. And of course, they both sport the same basic black vinyl cape, which should have old school Kenner fans mighty happy.

unimon4

The head sculpts are also quite good and not overly proportioned like on some of the other ReAction figures. Dracula isn’t really the spitting image of Bela Lagosi, but it’s a good generic vampire. Phantom on the other hand, I think they did a pretty nice job on making him look like Chaney in the makeup.

unimon7

Next, we have The Wolfman and The Mummy and again, Funko did some nice work on this pair. I’d say Wolfman is probably the best sculpt of this wave just because of all the detail they put into his furry hands and feet, the little rumples in his shirt and the creases in his trousers. The head sculpt is pretty damn nice too and all the paint is sharp and clean.

unimon8

unimon9

The Mummy also has a lot of detail packed into his sculpt. All the bandages are defined and thre’s little tatters and tears in them to make them look old. There’s not a lot of paintwork on this guy, but then he doesn’t need it. This head sculpt is equally as impressive as Wolfman’s and I’d say if we’re talking likenesses, this one comes pretty damn close to a Boris Karloff in makeup.

unimon10

As expected, these figures all have the standard old school five points of articulation. The joints are all nice and tight and the plastic quality feels great. The only drawback might be the total lack of accessories, but then I can’t think of anything to include with these characters anyway.

unimon11

I’ve been really choosey about which ReAction figures I’m buying and so far I’ve made some fairly good choices. Sure, The Rocketeer was a little disappointing, but I was perfectly happy with my 80’s Slashers and these Universal Monsters are absolutely fantastic. They hit the right nostalgia buttons by letting me relive the fun memories of my REMCO figures and these actually look like Funko put a lot of love in them, rather than just crank them out. These guys are proof positive that you can do genuine retro-style figures and not have them look like trash. I’ve already got Series 1 on order so I should be able to swing back and check them out in a week or so.

*If you want to read a great little article on the original REMCO toys, check out Terrordaves.com.